Kaolin washer

surface find in the leaf litter a nice silver earing

1943

What did they feed the pigs ? restaurant waist, what got in with it ? some of the tips

i would like to have the capabilities of the Tarsacci on one of the program choices . but other than that ,ya a dual frequency

revealing finds, chines coin may indicate that after the good stuff was found they moved in to finish up . and the seated saw at least 20 years circulation, I supose it was easy to loos things in the mud and dirt, and clothes where falling apart.

I see a detector coming that will see thru any iron and hit a silver coin and tell you how deep it is and it will have the ability to go deep , like 8 ft yep see thru aluminum car tire rims piles of cansand just report on silver gold . and the only obstakle will be permission and how much you can dig. but its price will be based on that fact that it will find alot for you maybe 10 to 20.000 bucks

you know I think its a 1928 D its definetly a D but the 8 may have fooled me thinking its a 3 have to take a closer look because i could not find the value of a 1923 D as i dont think they made them

Special thanks to Calabash digger for his reasearch on the pitch mode being good in iron , and His heads up on keeping the silencer at -1 so the target does not get masked in iron . well i used the pitch mode on the DEUS and kept the silencer @ -1 and it came thru for me , Got a good hit on many non ferrous targets today and some right next to iron . i was using the full tones but when i seen Calabash diggers VDs on the pitch mode i had to try that and it has proven to work very well the VDI on this target was 49 and 50 right where a 22 casing comes in or some foils . glad i dug it

Special thanks to Calabash digger for his reasearch on the pitch mode being good in iron , and His heads up on keeping the silencer at -1 so the target does not get masked in iron . well i used the pitch mode on the DEUS and kept the silencer @ -1 and it came thru for me , Got a good hit on many non ferrous targets today and some right next to iron . i was using the full tones but when i seen Calabash diggers VDs on the pitch mode i had to try that and it has proven to work very well the VDI on this target was 49 and 50 right where a 22 casing comes in or some foils . glad i dug it

trying to decide , 11inch coil x35 or the 11x13 x35 anyone have experience with both

Yes i was using the fast program

I have been using the ORX and doing well but have not found any coins, and i think i have hunted this unhunted spot now 10 rimes or more, But this time i got out the big gun , the DEUS in full tones, using Coin fast, it started squeeking out shot shells and brass things, one after the other , then my 1st coin on the spot came out a 1923 wheat. and not long after that the 1872 shield Nickle, I was using 8.4 KHZ and it came thru for me .and its deep to

that is in exelent shape WOW way to go

Yes red colors, are Pottasium feldspar. dark are biotite or hornblendmaybe magnitite

Running the Deus today using the Hot program with full tones, i was delibaratly digging out the big iron ,this program is great for telling what kind of iron you have i dug about 12 large iron s , and we know Iron can mask so i was digging it out and then i got a solid high tone that was clean and high 85 solid hit up comes a sterling silver spoon

The ORX is beep dig does not have full tones, but its a good machine even stripped down from the deus , but the deus towers over the ORX in my opinion

i HAVE been using the Hot program in full tones, with the HF coil and 28khz , I have been amazed at how good it is at telling iron from non iron , and tells me more about the iron in the ground , like is it round iron flat iron and really good at telling me how big the iron is . I took it to iron hill and its finding 22 slugs, shot shels, brass, right now i would have to say its my favorite, i do check it with the deep , program. the deep seems like the Equnox to me prone to false on cut nails. but so far the hot has been hot and good and hot

Yes i can see that , I found the only coin on nail hill with the ORX, and it was hunted with many detectors over 100 times the only coin ever found on nail hill was found with the ORX , i went over it with the deus 5.2 and did find a chunk of lead and brass but no coin, if i knew somone went over a yard with an ORX i would not even bother looking , the machine is that good

Back out with the Deus , and the Deep program and Deus fast, but this time i used 4 tones, with the 1st toneat 120 and the 2nd tone at220, 3rd at 614 and the last 120 and set the 120 to go low at 98 thru 100 and the 3rd to start at 11up to 98 the high tone in order to eliminate the nails sticking up at a angle it worked good , just the flat iron giving the high tones and they turned out to be some intresting relics. the fork has brass in it but I am sure it was probly just the flat iron that really gave it away , but I am using 28KHZ so who knows found some non iron targets again , great machine for relics

went back to the same spot i hunted yesterday, using the XP Deus program (DEEP) 9" HF coil and using 28KHZ, and found another 6 non iron targets. got fooled by the tabacco can bottom and spoon and hinge, it did have a low grunt of the end of it . gain was at 90 , and a reaction of 2. turned up the target volume to 6, so the faint targets sound louder, used a disc of 7. most iron will low tone but the flat or round iron will high tone and have a low off the edge., the Deus is bringing this old site back to life

I will try that Chase

I took the HF 9 to the notoriouse hill of many nails, used the deep program 90 gain, 7 disc,5 iron volume ,6 on the sound , two tone, 50 khz, and in 15 minutes found two non iron targets, this is like a miracle for this small area, if i ever get this thing on a new spot its going to eat it up if it can do this with a 10 year pounded spot

Got out again to the 30,s tarpaper shack, site. Hd the x35 9" coil, so the 1st thing i did was set the Khz to 25khz and used the deep program again , 90 gain reaction of 2 two tone, and right in the spot i have gone over and over for years i started picking out non iron targets among iron , if that baby is giving the high tone its a 90% chance you better check it out . and if its not its round or somthing flat i have to say I never knew a detector could do this . I like that its so light , and i can colaps the shaft and carry it on the ATV thru the woods and not snag branches, very easy to change coils , like i say very pleased with the deus

Yesterday i wanted to see how the HF coil staked up against the x35 coil in my test garden , I wanted to see how it did on high conductors . 8" dime 7" dime, 6" dime, 7" pull tab, and a 7" cut nail pointed at a 45 degree angle to make it false good . I used the ,Deep program, 7 disc, 2 reaction speed, silencer 1, 93 gain, bumped up the audio volume to 6, and to my amazment it hit all targets good and this at 50KHz I also have to 3" cut nails laying flat at 5" the one has a nickle 1" under it , and the other just the nail . so at the factory pre set of 5.5disc i was getting a high tone on the cut nail and i adjusted up the disc untill it went to a low sound , that was 7 disc but when i went over the cut nail with the nickle under it i got a clear high tone unmasking the nickle , so i wanted to take it out to the 30,s tar paper shack and see what it could do with an earea i had cleared of brush and went over many times. it was not long i started hitting 22 short shell casings and slugs, and to my great amazment a 1930,s shot shell , could hardly think i had missed it , but it was the 50KHZ was just picking things out in the iron , very pleased with it , i did dig several iron targets one was a fence post nailand a round tarepaper washer, and two pices of flat iron and at least two nails , but the performance was very noticeable at how good it is at hunting in the iron and still getting reasonable depth

Garett better start making somthing better than that or we will see some bad news like whites, gee wizz,