mn90403

So, you are saying that 24.5 inches exceeds the coil's sensitivity? Even a 2 lb nugget? haha Well, I know what you mean. The best measure would be to just take a connector and wave it over the coil. But also for 'reference' the connecting cables to coils are invisible. They must become part of the field.

I'm awl in on that coin. Have you had it appraised? This type of personalization may make it more valuable. That is what I'd tell them at an auction. It is not wear. It is one of a kind.

Simon and Chet, When I got my adapter made I chose the original method just preferring to have a joint farther 'away' to prevent any possible interference. As I was watching Simon's presentation I was remembering what Chet said. The coil didn't act like there was interference from that joint but I kinda wondered why. I know there is none because I've seen Chet use his. Simon has eliminated the wobble and taken that out of the equation. So why would the coil 'ignore' the joint in favor of a nugget which could be deeper? The joint is MOVING WITH THE COIL! The coil tunes itself with the wires that attach it just like every other detector with the exception of the XP. The nuggets/targets are not moving. When I had my shop make the adapter he was not much concerned with the adapter part itself but he later became concerned with the curl on the 19" coil. I'm not overly concerned with it because I don't plan on using it but I want it useable. I have another event to add to this. I went on an Arizona prospecting trip a few months back. It was to the Franconia area. On that trip the first day I was there I went to catch up with my friend and we decided to move locations. I got in my 4Runner and made it to the main road a little bit before him. He stopped and waved me over to where I had parked. He picked up my detector! What? I thought it was inside but my long overnight drive had me not thinking. I had run over my 7000 and it broke down on the lower shaft where Simon was taking it apart to change coils. (You'll need some to change quickly.) Luckily it did not affect the detector or the Xcoil I had on it. I had the 19" with me so I changed the lower shaft and it has worked find ever since. The adapter was not damaged in the process. I've since bought a lower shaft from Gerry (under $100) and I'm fine. It could have been so much worse with the tire running over EVERYTHING. I don't need to find any gold this year and I'm still ahead of the game. Mitchel

How is this for a price! $267 per gram! One of the largest gold nuggets to be found in Scotland has fetched £3,812 at auction in Edinburgh. Weighing 18.4g, it was found in a river in the Borders by a gold hunter using a technique known as sniping, which involves lying face down in the water wearing a dry suit and snorkel. https://www.thetimes.co.uk/article/snorkelling-gold-hunter-lies-low-to-claim-a-juicy-nugget-w6dz2bjll

POP now lives on the Santa Monica Pier. It is posted on the Ferris Wheel. They have a small roller coaster. Here is the park you were talking about: https://en.wikipedia.org/wiki/Pacific_Ocean_Park I've been here since 79. The Ocean Park Pier was already gone. I just read about the auctioning off all the rides and things. I had never read the details of the old park before. When I look at those pictures I can see there was a lot less sand than now.

And You really love the camera and the story. I enjoyed this video very much. You showed Hannes dedication to his pursuit of nuggets. Many of us share that feeling with him and you. Thank you very much. Mitchel

Walt, I don't know why you haven't gotten a reply sooner but I'll take a stab at it. I first read about Rye Patch many years ago on Chris Ralph's site here: http://nevada-outback-gems.com/prospecting_info/majuba_mtns.htm It is still one of the best ways to learn about Rye Patch. Now that you know where it is then you can look at many, many other threads and pictures of gold found there by searching Rye Patch on this forum. I know this will help. Mitchel

Oh, there's more. They show her in one chipping down through rock but most of them are in that black, volcanic stuff. But I saw one where there were actually 'layers' so it was not totally free floating gold. I still don't know what to think.

I just watched a few of these videos. Has anyone else watched any of them? I don't know what to think! https://www.youtube.com/c/GoldenBeardMedia/videos

Thanks for the compliment but I know I should have developed 'better' patches by now and get out of my own boxes in order to find better gold. Location, location, location is the real game and not the equipment I think now. As Anthony has mentioned the desert ALWAYS provides its fix whether you find gold or not.

Simon, This trip I passed by two gold fields on the way to Quartzsite. One I've found gold and the other I haven't. Both of them have a long off road drive after you leave the highway. Sunday I didn't want to deal with that and just fly along at 80 mph when I could. Time for you to look at a map and sneak off without JW or ask those dealers you know where you should go. They have other clients who find gold and they want you to find gold too. A good dealer is a source of information. As a matter of fact I called Gerry up one time when I was at Rye Patch. I had looked at his web pages but I was not a customer. I called him and he told me some good information. It was 2-3 years later before I took lessons from him. I owed him. (I don't think I ever told him that story.) He'll get more of my business.

Norm, It is very, very dry this year because of the la Nina. All the moisture tracks that come up through Mexico to the deserts are staying east this year and making hurricanes. The vegetation is dry and even some of the big cactus couldn't survive. It may be easier to get to some of the more difficult washes or under previously green bushes. I could push them over with my boots. Mitchel

Jim, I need to come back your way sometime soon and get the stink off from there! Mitchel

Yesterday morning about 1 AM I took a break from the exciting 'Dumping SDC 2300 Detectors' thread to go find a nugget. I had big gold in mind so I didn't take my 2300. I was headed to Arizona. It is a 4 hour drive but pretty simple. Leave Los Angeles (I live at the #1 Exit on I-10) in the middle of the night with no traffic and get off on Exit 5 from the I-10 freeway in Arizona. I've never done this as a one day trip but I had to try it. When going to Arizona this time of year there is a 1 hour time difference so when I arrived it was still dark but 6:30 AM. I had left the $3.00 per gallon gas for a price of $2.12! I went to the dark gold fields and got under some power lines with the 7000 and the 15x10 Xcoil. I took an extra amount of time to adjust my harness to fit like a glove. It was no longer 'hanging' on my body. It was like a well tailored suit without unnecessary wrinkles. I was thinking of Simon as I made myself ready for battle. It was supposed to be a cool day (95/63) but I was already wet with sweat in the early morning. I'm a beach guy now. I wear shorts and sandals ALL the time but with my brush pants on (ala Chet) it was hot with only a t-shirt. My first stop was an undetected area to me. There were no targets for the first 30 minutes on any of the gullies. Then I found a couple of pieces of lead as the sun came up over the mountains. This was an area where I had found a 1949 California license plate 7-8 years ago. It was now time to hit the target zone where I had been given a pointy finger. This was the reason why I made this long/short trip. I detected it as I have many other Arizona gullies in the past. Often times it is unproductive in the bottom so you hunt the sides. Norm knows this area well and spends many days with his wife camped near. Lots of gold has been found here but not this time for me. After 2 hours of working this 1/4 mile stretch of gully it was time to go where I had found a 5 gram nugget it the past. Once again after an hour there I didn't add to my polk and it was now 1 PM/2 PM. No gold after 7 hours and the temp was near 100. How much longer did I want to do this? Lunk had shown my wife and I a spot many years ago that had been raked and worked. That day he found one piece and we found none. That place came to mind. I had hit it once with the 15x10 but I was willing to try it again. This is an area that often times has many campers in the middle of winter but there was not a single camper today. I could hunt it at a slower pace and that is what I did. This area also had a bit of a breeze. Some of you may recognize it. That's Dome Rock in the picture. Finally I got a target and it was a little gold. I was so hot I forgot to take a picture. It was down about 3 inches. (The little tiny wire was found and doesn't register but it screamed so I knew I was hearing things!) The stink was off. No more skunk but it wasn't getting any cooler. I spent another 30 minutes trying to get a second nugget but it was time for me to go. The trip back was going nicely until I got past the 62 exit to 29 Palms (another gold field) and then it backed up for miles. It took me one hour longer going back but I was back in Santa Monica at 7:30. The things I do for gold. We have about 24 million people in Southern California. I don't know how many are prospectors and how many have gold machines but we've hit everything within 4 hours of town pretty hard. I'd say there are very few virgin patches within that area so you have to work already worked ground to find a nugget or two.

I'll post this up for Gerry. I hope you find something like this Rick.

Simon, You are getting there. You are becoming more and more like JW who has multiple personalities when he detects. He adapts to the gold. You have learned his techniques for telling a good prospecting story. Some detectorists just remain harsh and abrasive and can't adapt their style or appreciate the style of others. To listen/read from them becomes a tedious exercise in bashing people, places and things. You are better as a Grasshopper. (You do know that TV show, right?) Mitchel

I dig too many of them to know exactly what I'm digging. There is enough of a 'mystery' attached to their sound that what I hear doesn't always ring a real bell in my mind.

Ok, gotcha on the scoop. I've got a couple of cranes I'll use when I get one if there is anything that deep. No cheap carbon fiber shaft for me. It is all stainless. I can't dig fast with them but I can go really deep. My Nox tries to ignore the stakes but it ends up playing tricks with the size and shape.

School I think you are supposed to go get wet with that coil and not be afraid of the water! You will have to take some wading gear with you next time and 'expand' your beach. What did the tent spikes sound like? haha Mitchel

Elephant Mining!

That was a good read and your photos were excellent. How did you get the black background photo? Mitchel

The audio testing begins at the 21:00 minute mark if you want to jump to it or repeat it. Thanks for that. Lots of good finds before that make me wish for an ancient beach near where I live. Mitchel

I keep waiting for Chet's report. Did I miss it?

I know you can't take and sP01 in the water but could it be used to any advantage with the AQ? What are your thoughts. I'll ask Pat what he thinks. Mitchel I added this from the manual. Volume Control The Volume control adjusts the loudness of all audio responses. There is a trade-off between a setting high enough to hear a faint deep target, but not so high that a strong shallow target hurts your ears. It is good practice to lower the Volume before turning on the detector, especially if you are already wearing the headphones. Threshold Control The Threshold control sets the level at which the background audio tone (the “threshold” tone) is heard. In most cases, faint target signals are easiest to hear when the Threshold is set to a low but clearly audible level. If the Threshold is too low (especially “silent search”) then a stronger target signal is required to activate the audio, resulting in a loss of depth. A high Threshold level can result in audio fatigue. NOTE: With the Threshold turned down, you will normally want to first adjust the Volume for a comfortable level on a strong target response, then adjust the Threshold for a comfortable threshold tone level.

Good on the find. You'll gain additional confidence in the detector now no matter what update you use. Mitchel