Jump to content

californiagold

Full Member
  • Posts

    358
  • Joined

  • Last visited

  • Days Won

    10

 Content Type 

Forums

Detector Prospector Home

Detector Database

Downloads

Everything posted by californiagold

  1. Does can't mean the same thing over in oz. Because if you read my reply post that is what i said, Cant with the gold monster. But that is not always true. Ive used both monster and equunox for gold and sometimes i can get away with not using a scoop. It is the same for most detectors. Including gold kruzer. It is very sensitive 16khz stronger then monster. So on some days it picks up my hand more. I believe it is the salts on your hands. Actually i really believe the scoop technique comes from oz, beings it is mostly a pi or zvt country. Not as many vlfs. I dont think u ever saw a pi or zvt video from oz that they were not using a scoop. Ironically in 35 yrs detecting i have only seen a couple of vlf detectorist over here using a scoop. Everybody i know pinpoints with the tip of the coil then separates the signal from original spot with a pick then isolates it quickly to a small pile of dirt then sprinkles some of the pile on coil. When you hear it hit thw coil. Poke around with your finger till you touch target then bam your done. So i think different techniques and tools must be regional.
  2. I generally dont use a scoop. Unless im using a pi or zvt detector. Most times i can pinpoint very well and i can get the target on the coil in a couple pinches of dirt. Usually faster for me then a scoop. But i guess you cant while using a gold monster. Thanks for watching
  3. Hello, I finally had a chance to get out and try out the new Makro Gold Kruzer on a old gold patch that I like to use for testing. The mineralization there is tough and can be quite variable. ive tested many detectors there before and there is still gold present. I never detected all of the diggings so there is still some untouched ground. now it was the Mak gold Kruz's turn at it. The new Mak Gold Kruz is a very nice, well built vlf detector with a higher frequency that is quite capable of going after those small to tiny bits that are left over at many pounded sites. most don't like to spend the time chasing tiny crumbs, but for a lot of places there isn't much left at those specific areas but tiny gold. If your after gold crumbs all the way up to larger gold then Gold Kruz would be a great choice to arm yourself with. steve already did a well written post about everything and more on the Makro gold kruzer, so I will just relay my experience with it. For this gold patch I was able to run Gold kruz in all metal with a sensitivity of 70-75 and 80-85 at some of the areas. it runs very smooth and without adjusting any isat, the threshold doesn't blank out over heavy spots of mineralization. others I tried before there do. some I could adjust some isat for a faster retune and they were good. The kruzer has a great balance and a nice grip and is pretty lightweight. it pings on gold easily and strong and was a great machine to hit the gold fields with. I am looking forward to using it more and also trying out the 7.5 x 4 " elliptical dd coil. The only issue that I had was the length adjustment for the supplied wireless headphones was just a little short for me and didn't quite come down all the way over my ears. that is with a hat on though, so maybe without they would. also I was very near a motherlode highway with big rigs and all, so the headphones on full volume were slightly lacking. but the traffic noise is horrendous. out in other gold fields im sure they would be fine. maybe an update to the detector volume might make them louder? All in all the headphones were very comfortable and top notch. I was able to easily find a few pieces of gold with the gold kruz and im definitely confident that it will make a great gold prospector. I would recommend it for anyone wanting a higher frequency machine. I am going to definitely have more post coming and videos using the Makro gold kruzer, so I will keep you posted on its experience. I also am going to do a video on undug targets in the gold patches comparing The Mak gold kruz, gold monster, and equinox just to see how she goes. it wont be a competition , just a comparison in my areas. some will be better then others in different sites and situations. my finds for the day for a couple of hours with Mak gold kruz was .7 gr or .5 dwt. not much but was a great experience. Thanks and Good Luck!
  4. Take the coil cover off before you start it up. Then start it up and then put cover back on. My coil does same thing once in awhile. This always fixes the overload upon startup. The coil works fine after this procedure. Maybe steve can come up with some tech reason this might fix the overload. I have no clue. It just works. Everybody that had issue it work for them too after i told them. I had a 15 inch nokta coil that did the same. This procedure fixed it aswell. Good luck
  5. Go ahead and take the equinox to oz. Just leave the 7000 here with me and ill make sure it finds enough to finally be paid off. Lol. After im done i will forward it to oz thru Fedex. Lol
  6. Nice find for a quick hunt. Any spare change you find can be donated to my Fed Ex go fund me account. Haha. Take care brother.
  7. Matt kelava has some videos with his 4500 on youtube under "goldhunter" channel. He had his done by woody. He also uses detech coils and swears by both the mods and coils.
  8. Great job klunker saving a fellow lots of money. You should get the minertarian of the year award for that effort. Cheers
  9. If paul chops off any more toes with my pick he probably will have to switch to wearing clogs instead of his flip flop dress shoes. They may end up keeping him over there for the circus. I guess ill have to get another zed man for my gold sites this winter. Best of luck Nurse paulus. Lol
  10. Nice chunks lunk. Ive been working 7 days a wek so i havent had a chance to go detecting and probably wont till November. Thanks for reminding me of what gold colored lead looks like. Cheers
  11. Ya know, now that i look at the picture of patty the squach, it looks just like nursepaul. Even has the same face. That was him in that gorilla suit that was traipsing around over in bluff creek. Probably trying to scare the kids off so he could try to take their fishing hole. Great gold finds again. I assume alot of people will be showing pictures of the tiny stuff the monster can find. Once they find a multi gram nugget it will probably sound like a hood of a truck buried under ground. Good luck with your gold monster finds.
  12. Before you come back with my new supersede pick, can you let some other prospector that can actually find gold touch it for good luck. Haha when you get back you can have these gpz spare parts and flip flops that you keep shipping to me. They dont work on my gpx. Everybody back home is finding lots of nice gold, too bad you missed it. Must be good luck for us for you to be downrange. . I bought a nice used couch in hoopa. It came with a gold nugget some nut lost. See you when you get back. Have fun get some gold.
  13. The ground phase number is always reading the ground and changing despite having a proper gb. One tip i always used is, if you go over some hotrocks, they will transmit a audio signal and possibly a very high or low target id. But during then the ground phase will jump around like normal. But if it is any metal, the ground phase number will drastic drop lower towards 0. Usually somewhere between 0 and 20. If it is a hot rock it will not drop towards zero. Youll just hear the zip zip like a signal. Ground phase is not a target id but can be used to identify a hot rock or metal. I had this happen hundreds of times before i received any target id for the metal for it was still out of range for the target id to identify. I dont remeber ever finding one hot rock that made the ground phase drop towards 0. Other then that, what everyone else said also was helpful. Good luck
  14. Steve, the gpx shaft is a good alternate, but i checked mine out with one of the gm 1000 coils and the yoke of the gpx shaft does fit between the coil ears, but the gm coil bolt is a larger size diameter then the hole in the gpx shaft. I guess you could use a smaller diameter bolt and use a wingnut to mount to the gpx shaft. For my partner the gm is also too long. We adjusted it to fit like chuck did. It has about 6-7 inches of shaft past the arm cuff. But she holds her arm cuff next to her side anyway so the xtra shaft didnt bother her. Only chuck.
  15. Hello Finally had a day off after weeks of work to go detecting. My partner and i both had new purchases to try. First i tried out my new 18" detech mono coil for my 5000. It is an amazing coil. Very very quiet in tough soil. It is really sensitive to small targets. I dug one gold piece today at .24 gr. In about 20 minutes of detecting. And some lead targets missed by my previous grid sessions with the coiltek 14 and 18" elites. The detech 18" is definitely a keeper for my arsenal. Next was the amazing performance put on by my lovely partner and her new gold monster. I let her find quite a few undug targets at a site where we found hundreds of pieces of tiny gold in the past. Then once she had a few targets. I tried to follow her gold monsters performance with my makro gold racer running in all metal with sensitivity 75 and enough isat to run a smooth threshold. Any isat less then 7 dont work here. Blanks out the threshold constantly. In the end i could get a signal on 1/3 of her gold monsters undug targets. Mostly they were all a tiny break in the threshold. I also tried my disc 2 mode with the sensitivity turned up to where it gets sparky.(90) But they still just had a small beep. Her gold monster had a totally different reply to the undug targets. Very loud. Which i believe was already stated by steve in his report. We also had her try gold monster in many manual sensitivity settings in all metal. All the way to manual 10. But it is a little sparky up too high. Best manual setting for this site was 6. But the targets were either alot quieter or non existent with that setting. The disc mode was also applied and sounded off well on them. Just not as sensitive. The autoplus mode was definitely the best app for our conditions at the goldfield. The mineralization only made an occasional peep in autoplus. But was easily recognizeable. A few hot hematites sounded off. But they can be checked in a quick switch to disc. Then only once in awhile they would slightly ping only in one direction. So then we dug up the undug targets. Some were tiny birdshot but most were gold, missed previously with other detectors. Everyone of them amazed me how loud they were for their size. Especially the 2 that wont even weigh in the 10ths of grains. These targets were not right on the surface or i would have heard all of them with gold racer. They were deeper then gold racer could detect. I have mostly detected with vlf detectors for 32 years and i could not believe what i was seeing. It was actually pretty funny. Now i feel like i am running old school equipment with my gold racer. I am definitely going to be making the change to gold monster myself. No its not a zed or a pulse induction unit, but i am willing to put money on youll find gold you missed with whatever you are using now. If you already own a monster then take a look at the red dot at the end of the foreign writing and see how small it is. Thats how small the gold we found. Only it sounded like a shallow gram piece of gold. All the 18 pcs that gold monster found totaled only 1/2 dwt. Big money! I have seen the promised land and it is real and its called gm1000. Good luck
  16. What about that theory or maybe its fact that there is pounds of gold and other metals in human waste and sewer water. I seen it somewhere on a show perhaps. They were trying to figure out a way to extract it. I hope they dont classify it down before they pan it. I guess precious metals are in all kinds of products we consume and use on a day basis. This could be a great new reality show for Mr. Hoffman Poo miners. Next time someone says your full of it, you can say yeah but im carring 2 ozs. Good luck scott.
  17. Looks like raisin bread. I also had a friend order a video cam from china off amazon. it took like 2 months. first they had to steal the plans from a distiguished company somewhere else in the world.
  18. Nice find. nothin beats the heat like a little gold.
  19. That one is in too good of shape to have ever been Paul's.
  20. Did you dig all that with my pick Paul? damn your a digging fool. You can just keep the pick. lol
  21. If gold is now layin around after all this non el nino winter rains. then I need to find some of that gold grease they sold during the original rush. they advertised it that all you had to do was smear it all over ones self and roll down any hill in California and gold would stick to the gold grease. then you just pluck it off your clothes. sounds easier then doing all this metal detecting.
  22. In the begging it was just finding a piece of gold. then more, then a big one. Then finding some gold and relics where my elder family mined during the rush. even was with a friend when he found a gold double eagle. damit. atleast I got to be there. Nowdays my goals are different. Just being outside enjoying the wilds with the possibilty of getting attacked by a mountain lion or a Rabid Nurse paul is thrilling. but most of all I enjoy more helping new detectorist find their first gold and see them off to a new detecting hobbie. that is my treasure or goal nowdays. too give back. No not you Paul. Good luck!
×
×
  • Create New...