Jump to content

goldwright

Full Member
  • Posts

    114
  • Joined

  • Last visited

 Content Type 

Forums

Detector Prospector Home

Detector Database

Downloads

Posts posted by goldwright

  1. I feel because high yeild is the most sensitive setting it made the most falsing with the 19 same with 14 HY and high sensitivity and my 14 falses.  Slowing your swing speed and good coil control with the 19 on really reduces the falsing.  I ran in General/Normal with sensitivity at about 10 and alot of the noises were gone.

  2. Just like anything prevention is better than cure.  Always being prepared never hurt or got anyone lost in the past.  I have a day and a half extra food supply stashed in my boat as a precaution and periodically change it out.  Same as my pack when prospecting compass, gps, spare batteries and when wandering always look up from time to time and take in all the landmarks you can.

  3. Yeah location is one important factor, but you can have the best location with gold 100m from were you park your ute and still not find any.  Hours on the ground swinging the coil and confidence in your ability with your machine and the method you are using trump location in my book as we all know where to look.  You can miss a piece by a coil width and that piece could be the first of a patch of who knows how many ounces.  Covering as much as possible of the gold bearing ground you are in and dig every target is the only way.

  4. Yeah I reckon Minelab worrying about GPS in their detectors to be a waste of resources when new tech to find us more gold needs to be funded and researched.  I can carry a GPS on my pack with ease as have always and still do and I have never actually turned my GPS on the Z as the CTX version is sluggish and quite unusable compared to a dedicated GPS with mapping.  I have one GPS on all of the time making a track of where I have been, then this is downloaded to OziExplorer and saved.

  5. Yeah after using the Deus the CTX really is sluggish at keeping up when there is a lot going on under the coil but with the extra info on the screen you can end up digging a target without an actual tone.  I chase our aussie $1 and $2 coins but alot of the places I go the rubbish isn't ferrous but just loads of non ferrous close to the surface around these coins but if I get a clear dot on my trace screen in the right area bam coin.  Now our 1 and 2 dollar coins are a copper-nickel combo and stand out almost on there own in the ID other than squashed alloy bottle tops.  If the Deus could do this I think my CTX would sit in the cupboard.

  6. One thing I would like on the CTX and I know this is not new tech but feedback on the LCD screen about the frequency the machine is running at on any particular target.  The one thing I like about the CTX over the Deus is the amount of info it tells you on screen and knowing the frequency could help with not only depth of target but also fast info on size of target and when chasing jewellery this would be invaluable.

  7. You run a tight ship Steve, that is one of the reasons I have started using this forum more and more.  This forum is very info based and adding more will only make it a better forum for all. Keep up the good work.

  8. Yeah I feel the same way about audio smoothing, it was on when I first got the machine and since then it has been off and use sensitivity and threshold if too chattery. I love the Z for the information it is able to give you when detecting, when the ground changes it changes but also continues to give you feedback.  I have dug many deep targets this year with nothing but a pause in the threshold and by pause I mean something in the threshold that has stopped me and even after scraping the ground no real audiable signal, it is just the Z telling you something.  It was actually chasing $1 and $2 coins in the parks that has made me a better Z user as going slow and covering the ground produces more dollars and coil control and sweep speed has a huge impact when it comes to what information the Z can tell you on those really deep targets.    

  9. I am with reddirtdigger, any variation of tone or bump in the threshold needs to be investigated lost count of the amount of targets pulled from depth from nothing but a pause in the threshold.  Running a lot less threshold on the Z seems to allow the complex responses of a deep target pop, I know this is not for everyone but like Norvic said no threshold and maxed sensitivity can really find it deep.

  10. Yes I find it very strange with the new small battery that Minelab has come out with did not carry a wireless module, just make it the same RF as the WM10 or WM12 receiver.  They obviously saw the demand for a smaller lighter weight battery so people could free them selves of the wires but no true wireless.  Just gives us a project to work on I suppose.

  11. Just thought I would share my wireless setup for anyone thinking of trying this.  I have used Avantree Saturn Pro (Low Latency) bluetooth Transmitter/receiver and some Camcorder batteries.  I have also got a couple of Lipo batteries from my RC which run the 5000 really well as they keep their voltage for longer.  The leads I made myself with genuine power plugs and a deans RC battery plug and a 1/8 audio jack so as to go straight into bluetooth wireless module.  These little module are very good and are lasting well over the 8 hour mark on a charge, and their size and weight make them very versatile.  The 7200mah pack and wireless module come in at 325 grams with leads included this lasts about 5-6hours I have made up a couple of 3400mah packs with 18650 cells and these weight 180 grams with module and leads and lasts about 3 hours.  I have a 5000mah Lipo hardcase which weight 200 grams with both wires and module, this goes for 7 hours before the low voltage alarm comes.  Lipo batteries aren't for everyone as they can be a little volatile, but I am yet to have one explode and treat them with care when charging with a good lipo charger.post-765-0-87109400-1454978896_thumb.jpgpost-765-0-14800000-1454978905_thumb.jpgpost-765-0-97262400-1454978911_thumb.jpgpost-765-0-38835900-1454978917_thumb.jpg

    • Like 1
  12. If you are looking to spend that kind of money you could look at wireless guitar systems, they have a Latency of under 5ms and some of the best wirless audio I have ever listened to.  My electrical engineer mate has the Line 6 G50 and we plugged into the CTX headphone jack and holy crap that was some great wireless audio the same as plugging the headphones direct.  The transmitter runs on AA batteries but the receiver needs a power supply but you could adapt as I was going to try this option.  The sony wireless guitar system has batteries in both and Joyo wireless has rechargables in both TX and RX but only runs for 4 hours.  But the transmitters start to get up in weight to, also the AKG K840KL's look the goods too battery life up to 20 hours small transmitter Kleer 2.4ghz not bluetooth but no info on Latency and at $400 here in OZ costly experiment.

  13. Yeah the Avantree Saturn Pro Low Latency work a treat.  They get 6-8 hours of use and the lag is unoticable of around the 40ms.  They are only 1 1/4 inch in diameter and weight half an ounce, charge from micro usb so universal.  The audio is very good and comparable to the Minelab Wireless system, which is very good.  And you can use what ever headphones you want or booster speaker.  I use them direct from an after market GPX battery without booster and use in ear headphones with the RX in my top shirt pocket and the audio is plenty loud enough you just have to adjust volume on the 5000.  Haven't used them for a season yet but they have lithium Ion batteries and 12 month warranty.

×
×
  • Create New...