Sérgio Campos
Full Member-
Posts
21 -
Joined
-
Last visited
Content Type
Forums
Detector Prospector Home
Detector Database
Downloads
Everything posted by Sérgio Campos
-
Minelab's New Learning Video Series
Sérgio Campos replied to phrunt's topic in Minelab Metal Detectors
Thanks for posting Simon! Amazing video. Learned a lot. I couldn’t find it on the Minelab website. Where did you get it? Cheers -
Welcome to the forum! 🙂
-
There as a topic very similar to this one a few weeks ago… did you checked the cable connection? Make sure it’s properly attached with the screw connector tightened. Often my atx goes crazy because of changes in soil mineralization or emi but never to the point of having to bring sensitivity to zero.
-
I had the same issue (rod not fully retracting) since I started to interchange the stock coil with the 20” deepseeker. I agree that twisting a bit more the cable will help to better close the shaft. You say the black shim is broken? Because it’s supposed to be loose from the rod… About the rod coming out, it only happened to me one time (before I started interchanging coils). If I remember correctly it happened because the rod was not unfolding and I twisted it and pulled it very strongly. Not a smart move when dealing with plastic … Then I did the cleaning with lots of running water and it never happened again 🙂 Anyway if you get in direct contact with Garrett with your questions for sure they will help with suggestions. Happy Huntings!
-
What Will I Dig Up Tomorrow? Taking Guesses
Sérgio Campos replied to Lead Detector's topic in Detector Prospector Forum
I hope it´s a gigantic nugget!! Sorry to say it sounds ferrous… It also seems the target is halfway down the hole on the side wall. I always widen the hole so it´s easier to pinpoint the target ( in motion mode). With such loud targets, often I bring sensitivity down, so I hear the changing tones and try to determine the position and depth. Using a pinpointer will help you save a lot of time per target!! Happy hunting! -
In Need Of A Good Pick For Detecting
Sérgio Campos replied to Gold Dozer's topic in Detector Prospector Forum
This is how mine looks like assembled. I added a magnet on top. The cable is about 60cm/ 25 inches. One piece no welds. Still holding shape after at least 2000 digs! -
I use work boots for electricians and electrical workings. Usually, every brand has this model’s type. I prefer the shapes that cover/touch the heel, it gives more protection, and it supports more the heel if you misstep. The ones made from leather (a bit more expensive) don´t heat so much when exposed to the sun, but the synthetic material works fine too.
-
In Need Of A Good Pick For Detecting
Sérgio Campos replied to Gold Dozer's topic in Detector Prospector Forum
I use a 530gr (18,7 ounces), double use hoe from Bellota. Pretty much indestructible because it’s forged in one piece. They are made with the best steel (this company manufactures agriculture tools for 120 years). I use this brand for farming activities for at least 40 years. The pointy edge will not erode and the flat side is always sharp. Even if you are hammering on mix soil/stones. It’s lightweight and inexpensive. I purchase the tool without the cable but they also sell with a cable, just cut them to your desire length. They sell worldwide. https://www.bellota.com/en-us/for-agriculture/soil-preparation/hoes/hoes/forged-double-use-hoe-hoe-and-launcher-with-antigiro-system-hoe230/hoe230bp -
This seems exciting for large gold areas!!! 😃 Would this be good machine for gold nuggets? Say one ounce and up? How deep it would locate a one ouncer? Would it be more efficient (for large nuggets) than a GPZ with standard coils (on medium mineralized soil)?
-
Membership Check In Or Be Purged (Completed)
Sérgio Campos replied to Steve Herschbach's topic in Detector Prospector Forum
Still here! Detector Prospector is my MD oracle... I surely don´t want to risk being purged. Thank you Steve! Thank you all for the posts! They are very helpful and entertaining!! Greetings from Portugal -
New For 2022?
Sérgio Campos replied to Steve Herschbach's topic in Metal Detector Advice & Comparisons
Thank you all for the inputs!! I learned more in a couple of months with this forum than the last 3 years of internet lurking. After your feedback I consulted with my MD shop and they also advised the ATX. So I ordered the ATX. It should arrive in two weeks !!! In a way, I was keen on trying a new brand. Anyway, I already informed OKM of my decision and explained them my reasons. I told them that my decisions comes mainly because there are no independent test videos for the machine, only promotional videos. Told them about Nokta doing pre-tests with independent testers with he Legend, and also about the Impulse backfired beta test flop. They were okay with it and replied they may review their marketing strategy. Let´s see if something happens... 🙂 Now I am concerned with a strategies to deal with the machine weight and battery life. For the weight I plan to get a DOC´s harness and a Saga swing arm. https://docsdetecting.com/product/docs-new-ultra-swingy-thingy/ https://docsdetecting.com/categories/saga-swing-arm/ For the Battery life two units of https://texaspremiumdetectors.com/shop/rnb-at-pro-battery-pack/ -
New For 2022?
Sérgio Campos replied to Steve Herschbach's topic in Metal Detector Advice & Comparisons
-
New For 2022?
Sérgio Campos replied to Steve Herschbach's topic in Metal Detector Advice & Comparisons
Yup! I had the feeling that you would be supportive... It´s seems something similar to the QED. I will post info when I have it. Cheerio -
New For 2022?
Sérgio Campos replied to Steve Herschbach's topic in Metal Detector Advice & Comparisons
Because I found some good targets with the GM 1000, I believe I really need a PI for large nuggets. Because I can´t afford a GPX or a GPZ , I decided taking a leap of faith on the "NEW 2022" German made OKM Delta Pulse -omega version-. https://www.okmdetectors.com/products/pulse-nova?variant=37643600658600 I am a bit scared with my decision because OKM is a freaky company! Their headquarters is a glass pyramid... 🙂 Their main focus are several radar and image machines for archaeology. They also have a "long range" detector and as I learned from Steve that is a major no no... Their videos suck and are directed to the middle east. Anyway, I tried to get informed about OKM and they seem legit. The headquarters exists, they appeared on national German TV, they are certified by the German chamber of commerce and the financial information offered by survey companies state that they sell about 2,5 million€ per year. They have a fairly extensive user manual for the machine. https://cdn.shopify.com/s/files/1/0274/1154/6156/files/Manual_Pulse-Nova_EN.pdf?v=18306139255944048693 I believe this is their second PI model (the first seems to have been some years ago). This Pulse nova model has been released in 2021 and apparently was sold out. They informed me they have a new batch expected for early march. It´s a PI unit but they don´t explain in detail the technical features. It has two monocoils 18cm (7") and 38 cm (15") . Bluetooth technology for headphones and control unit. Just two knobs (sensitivity and sound) and one of the knobs has a press button for ground balance. Weight of the machine is about 2 to 2,5 kg (4 to 5 lb). It appears that the control box is detachable because of the option of using a large "square meter coil" that is included in the "+" version . My expectation is that I can detach it when using the coils to reduce the weight. Well this is my plan. Any thoughts? -
The Next Legend Update Explaining The Delays In Release
Sérgio Campos replied to phrunt's topic in Nokta / Makro Legend Forum
Congratulations Simon and Dilek!!! Great stuff! This is what I want from my detector manufacturer and my fellow aficionados - constructive discussion-. You both got me closer to the Legend. And the I nfo about the future PI is, to say it mildly, 🔥VERY EXCITING!!!🔥 - I cheer for a model for nugget detecting- 🤪 Also congrats to Steve for the house we meet! Cheerio -
New Vídeo On The Aqua Manta
Sérgio Campos replied to Luis's topic in First Texas - Bounty Hunter, Fisher & Teknetics
Hey Badger! This video is about target acquisition. He is using two iron nails and a small gold nugget for demonstration. First, he is showing how fast the detector reacts to a target. Secondly he activates "Iron Bias - iron signal filtering-" and the machine only reacts to the gold nugget. It looks promising!! Apparently Alexandre Tartar has not drop the ball yet 🙂 . Anyway, I only found out about AQUA about 4 months ago so don´t feel (has much) the frustration of our fellow aficionados. My expectation is for the gold prospecting model !! -
Gold Monster 1000 Or Equinox 800?
Sérgio Campos replied to ks1652's topic in Detector Prospector Forum
Hey ks! My experience is with the monster. It’s the only machine I have detect with. My hunting ground is schist rocks and the machine It is very stable and I can use it between the 7 and 8 “gain”. When the ground changes you need to adjust the gain or “pump” say about ten times and just keep going. I also use the “auto plus” combined with the manual for target verification. It’s fairly light weighted and after a couple of ours I need 10 minutes to recover my arm stamina. Very good battery life, at least 12 hours!? Pretty awesome machine!! It will detect crazy small bits. It has two coils and I prefer the larger coil because for scouting because it’s not as sensible and will skip bird shotgun pellets. What I miss is target ID ( which I believe the NOX has). I hunt for gold nuggets and often I will dig nails from old cow shoes 🙂 - something I discover from detecting is that in the old days they would do it!- and these are made of a metal that often is mixed and gives strong non ferrous signals. If I had target ID I would skip those. The monster does give sound variations easy to identify in swallow targets but for deeper targets the variation is not as noticeable. The monster works for my current gold, which is gold 🙂 but because I need depth my future detector will be a PI. Anyway, if I was to decide for another VLF I will go for something with good target ID. Say a NOX or a Legend? Hope this info helped. Here is a photo of a “Cowshoe” for future memory… Cheerio! -
How Did Your 2021 Gold Tally Up?
Sérgio Campos replied to Aureous's topic in Detector Prospector Forum
This was my first year detecting. Using a GM1000. I got 23gr total. About 100h detecting. The biggest piece is 8gr. In the photo there a 4 gr missing… Thank you all for the forum discussions! Happy New Year!!!! -
Today Chris Ralph "the professional prospector" 👍 posted a video in youtube that features someone from Fisher and this person teases about the new detector(s). Apparently there are two videos. The first is a sit down about detecting. In the second (not yet posted) they will they detecting in the field. Maybe the guy from Fisher will use a prototype!! Anyway it seems there may be something coming soon!