Jump to content

shopkins1994

Full Member
  • Posts

    41
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

shopkins1994's Achievements

Contributor

Contributor (2/6)

32

Reputation

  1. They don't know how to use a detector. They swing their detectors like it's one from 1975. Check out my Hecks Yeah! YouTube for real info on detectors.
  2. The Deus II uses weighted multi-frequency. It doesn't shoot 100% of the available signals into the ground and then read 100% of the signals from the ground. You can think of it as creating a new type of signal that has characteristics of all of the individual signals available and shooting that into the ground. Each program of the Deus II creates a different type of new, blended signal. The Whites V3i detector does shoot all frequencies into the ground and reads all frequencies, so it will report which frequency resulted in the hit. It's the only true multi-frequency machine I know. But they are out of business now.
  3. I posted the above video but the reason you want multi-frequency is that for 1900s silver coins you need 4 kHz but for 1700-1800s small silver such as reales, half-dimes, seated dimes, etc you need 20 kHz. With the Deus 1 or Anfibio Multi you would first hunt in 4 kHz and then go back over the area in 20 kHz. Now you can hunt in both kHz at the same time.
  4. Small silver coins (such as from the 1700-1800s) will read lower than 89/90 and as they get deeper the VDI will drop further. You are better to enter goldfield mode, IAR = 0, reactivity = 0, notch 0-20, turn on tracking.
  5. Hi everyone, I upgraded to v7 and when in the goldfield mode the sound for the pinpointer mode doesn't work anymore. If I watch the screen I can see the square filling in, but no sound. If I switch to something like the general mode it works. Any thoughts?
  6. You have to enable the USB port under devices at the top of the screen. Plug the remote in, and then click on DEVICES and USB and you'll see the Deus listed.
  7. I wonder if your XP usb cable is bad.
  8. I used USB 1.0 on a Mac and it updated fine. TheY must just not want to support 1.0.
  9. Hi everyone, I updated my Deus 2 to version 7 using my Mac by using VirtualBox and Windows 7, both are free on the Internet. Sam
  10. It's absolutely correct, and if you don't believe me, just try yourself, as others have done. Second, he lost depth, and so I said make sure he is at reactivity zero, so that his transmit power is high -- since he complained that his depth is less now.
  11. You should be running at reactivity 0. Reactivity is both recovery and transmit power, incase you didn't know.
  12. Reactivity is both recovery and transmit power. Set it to zero.
  13. Make sure you run reactivity at 0. It is both recovery and transmit power.
  14. Hi everyone, I did a quick video about the Deus 2 programs in the user manual. It's not an end all but it should help. Enjoy!
×
×
  • Create New...