xyz

Here is some information that may be relevant to people having issues updating their Legends. Be aware that I do not own a Legend, do not own a computer with Windows, and have not tried this with Windows 10 or 11. So all of this may be incorrect or irrelevant. Also if Windows modems are old news then feel free to stop reading now. And if you use your computer to connect to a critical device then follow these directions at your own risk. This worked for me in my situation. I have never tried it with a metal detector. This information was discovered a few years ago when I used to program radios with a Windows computer. When you connect a device to a Windows computer via the USB port, Windows creates a modem connection. The modem associates the device to the port you connected it to. If you plug the same device into another USB port on the same computer, Windows creates another modem to handle the connection. After some time the end result is multiple modem connections via multiple ports. At which point Windows cannot seem to figure out which modem talks to which device via which port. The solution is to delete all the modem connections and start over. A possible procedure: 1. Unplug all USB devices. 2. Go to the modem settings area. 3. Delete all the modem connections. 4. While you still have the modem settings page open, connect the Legend to the computer. A new modem connection should appear. 5. Try to update your Legend. Good luck.