RSmith

Yes i mainly hunt in AT-HC. I will have to try AT-LC to see if it still does it. I have also tried my wife’s TRX and hers acts exactly like mine. RSmith

That is my concern. When I noise cancel with TRX on, all appears good with no interference. But when I finish digging and have recovered my target I turn off the TRX. Now will this noise cancel channel without the effects of the pin pointer be wrong for this area and cause me to miss targets? I would think that, since noise cancel will cancel out the EMI, and EMI reduces the amount of depth you can achieve, … then …. The added effect caused by noise cancel with the TRX on would make the detection depth even less than if l only noise cancel with the TRX off. I have not yet tried manually temporarily adjusting the noise cancel or ground balance. I have tried moving the Manticore away… but it must be several feet away to not interfere. My sensitivity on the TRX is on max … It helps finding the small pieces of foil and I use it for small gold also. I do not notice the TRX falsing as others have noted. It does act that way but as this post alludes to, I have found it is only the interference of the detectors. With the detector off it all goes away. RSmith

I have tried moving the detector away …. But at times I have to move it 15 feet away to use TRX. In crowded parks, that is too far for my comfort. I usually just turn off the Manticore, but over the course of a 4 hour hunt, that’s too many times turning detector on and off. One thing that has helped, I turn on the TRX, then while it is on I noise cancel. It has helped a lot … but …. Is that going to reduce the Manticore’s ability to detect the deeper, fainter targets? RSmith

I am wondering if anybody else is having trouble with interference between the Manticore and the whites TRX pinpointer. It appears it is with the noise cancel channel, the Manticore chooses. -sometimes it will work fine, -sometimes it will work, but be very weak, -and sometimes it will have troubles turning on, and makes the manticore go crazy. I had to buy both act the same way. I am open for suggestions for a different pinpointer. I am looking at the F-pulse, mi4, and possibly profind35. ( I have had some Garrett’s but didn’t like them) Thanks, RSmith

Will we be getting an update for our 800’s to be more like the 900?