GB_Amateur

I think this falls in the category 'the rich get richer', but before anyone labels that comment as 'envy', the only thing I'm envious of is being someone who puts as much effort into the entire endeavor (including research) as Andrew. Sometimes people get lucky, but no one gets *that* lucky. Well done (again). Did soldiers in that area & time period get paid in small denomination gold? I recall an article by Tom D. about the subject but his was for pre-CW (~1850, Florida) soldiers when (according to him) only the highest ranking received gold; the others silver.

Sounds like the class was well worth it! Ditto what Simon (phrunt) said about confidence -- that's one of the things (and most important, IMO) the class gave me. Well done by the teachers and the student. Those are pretty good size for a well hunted area. Did you find them in the burn barrel vicinity or did you have access to some other spots? Manticore+M8 are getting more tantalizing as a small native gold finding system.

To be clear, I'm not charging for a service. I'm helping out a friend/acquaintance or even stranger. (In the last case I certainly limit my effort, but even for the other cases there is only so much time I'm willing to expend.) To me it's like getting asked to find a lost valuable such as a jewelry ring. As such I'm not going to the courthouse, etc. The property owner can do that. But here are some things I've 'learned' from my limited experience: 1) Get as much info from the land owner as possible. This includes asking about where s/he thinks it is -- hopefully based upon a past viewing. Ask for the locations of other known corner markers. This helps in two ways: a) if adjacent corner markers it can get you in the ballpark, and b) if you can see one and test it with the detector, assuming the same material or type of object was used for other corners you'll get a good dTID value to watch for. 2) Unless the marker has been driven deeper by unscrupulous persons (e.g. when putting in a sidewalk), it shouldn't require a high sensitivity setting so turn it down and go after the strong signals. 3) Other common good detecting practice such as choosing the right coil (e.g. if near fences, light poles, etc. where a small coil is best) go along with the technique. I've certainly found property markers by accident when detecting, as I assume many of you have done as well. Sometimes they sound off with a high dTID -- possibly bronze or brass or maybe a steel rod but with a brass cap. Yesterday's markers showed a red underlined 64 with iron grunt (only) on the ML Manticore so clearly a purely ferrous target.

Welcome back, Herb! I'm sure there's still some keepers out their with your name on it. I look forward to you sharing the results of your 'therapy'.

Very nice plot, but more info would help. E.g. pulse characteristics, how long after the pulse was the field measured, how was the field measured? Could you provide a reference? Was the pulse generated by an actual commercially available detector running in a mode, etc. available to owners?

Get ready for a deep discount sale on (some) Minelab PI's. 🤣

You've gotten quite a bit of good advice answering your specific questions. But since this forum is more than simply about specific questions or those who ask them, I'm going to throw a curve ball. Most of us have limited time to detect -- i.e. we wish we had more. Learning how to set up and use detectors is a necessary part of the endeavor. But adding a new detector and its learning process takes time away from learning about the one already in possession. In your specific case you seem to be a bit frustrated (at times, anyway) with the complexity of the Deus 2. I don't have one of those so can't comment specifically, but in my experience with other detectors, the better I get to know a detector the less complex it becomes.

I occasionally get asked to find property line markers that for whatever reason have been lost/buried. I've had mixed success accomplishing this. Around where I live they are posts (usually steel but I don't think that is always the case) driven vertically into the ground. I've also found some by accident while detecting for coins. I'm headed out Saturday for another assignment. Any advice is welcome.

Here's another of Andrew's excellent videos (from April 2024) showing the Manticore+M8 finding desert gold:

It seems like the $1200 USA price for the Minelab Manticore was aimed at that the XP Deus 2 market. Now it looks like the M'Core is still lagging behind by quite a bit! Minelab may be feeling the heat from investors for their lagging sales. Competition (above mentioned Deus 2 but also possibly Garrett's upcoming entry) is threatening part of 'the monopoly'.

That's the old way and some areas probably still have that. The new way is like yours -- optical fiber carries the signal all the way into the building (home, office, etc.). The fiber cable between (neighborhood) junction box to private residence does have a fine wire, the purpose of which is to attach a transmitter so the fiber line can be traced by a detector. But this is only activated for the purpose of utility line location determination -- e.g. when digging/excavation is going to occur and no one wants to cut the line. In my yard, the fiber line is quite shallowly located -- less than about 6 inches (15 cm) deep! I tried to pick up the line with a detector when it wasn't hooked to a transmitter and it did seem I could sense it, not by EMI but just from the presence of the fine wire. Might have been fooling myself, though....

I doubt the VDI would be slightly lower than a dime if they are more/less dime size and made of aluminum.

Recovered after almost 60 years: read here.

More great finds! The 1900-O dime is not common, particularly in higher grades (F-12 and above). I hesitate to give my opinion of the grade as photos typically don't show enough detail, but you can try your hand here.

Unhunted sites are pretty difficult to find. Thanks for the report and well done!

Finding even one silver half dollar is a great day, IMO, let alone two! I find your depth measurements interesting/enlightening. It makes me wonder what my 'hunted out' areas are hiding deep down.... I suspect you are getting in every free moment to detect that location before the inevitable 'development'. Milk it for all it's worth!

That's what mine shows (installed with the latest software update), except for the last line (UVC) which is in the 8000's. I wonder what 'UVC' means. 🤔

Those actually work underwater, i.e. keeping water from entering the ear canal?

I do:

Yep, and there are the various later models (F70, F75+, Teknetics Patriot) which included some but not all of their so-called 'processes'. Pretty much the same detector, just varied features (and prices).

Just a small addition: I think all the F75 models have static all metal. I do find their nomenclature confusing: 'Limited', 'Ltd', 'Special Edition', 'SE', etc. Here's the manual for the regular (gold shaft) model after Digital Shielding Technology (DST) was added, but in addition I have a pre-DST manual for the gold model and it also shows static all metal:

You just named three items I've yet to find, too. In fact I haven't gotten any thimbles, regardless of the material makeup, and my only halves are clad. You must have a good spot there, and unless it's on the beach or a location soon to be developed, it'll still be there waiting for you after the storm passes. Maybe some more firsts still there!

The Fisher Gold Bug Pro (twin sister of the F19) has a special place in my memory (and detector closet) since it re-introduced me to detecting in 2015 after ~35 year hiatus. Last weekend my neighbor saw me coming back from a 'hunt' and asked me to find his property line stake. He showed me its approximate location which was close to both a metal light pole and metal utility box cover. Out comes the Fisher F75 with tiny 4"x6" concentric coil -- the right tool for the job. I quickly located two screamer hits, one being the desired target. First Texas gets a lot of negative criticism here, some of it justified and other just sharks in a feeding frenzy after seeing blood in the water. As others (e.g. El Nino77 recently) have noted, we can be thankful for some great products they've produced over the years that are still getting the job done. Your F19 is certainly one of those.

Excellent story to accompany your nice finds. Coincidentally I've visited your grandfather's hometown 2 or 3 times for meetings and tests at the Columbia Scientific Balloon Facility. I recall it can get quite uncomfortable (as in hot+humid) in the summer months. I see why you want to get out now before that starts!