Search the Community

I'll start off by letting everyone know I am a total noob at metal detecting. Started back in August looking for nails after a roof replacement. The entire story is in my Meet and Greet entry. I retired in October, and have been outside every day I can with my Garrett ACE 400. Honestly I didn't have high expectations of what I would find. I read lots of pro advice and decided to start in my yard with the ACE, the AT Pro pinpointer that came with it, and a Lesche Samson shovel. I bought the Samson as it seemed to have the most favorable reviews. I read up a lot on the best ways to use the ACE. I also watched a lot of Hoover Boys videos, and marveled at what they dug up. I had no real expectation of finding the sort of things they do, much less coins. In the first few passes I found some old colonial buttons, and a WW1 Army jacket button. Just about every day I dug up something that was relevant to the area, mostly colonial artifacts some possibly related to the War of 1812. My county is very old, and still mostly rural farming. I have about 150 acres of farm in front of my house. There was a lot of trash from the construction of my house. Most annoying were little triangles of gutter and flashing aluminum that I found everywhere. For just a yard my results were astonishing! On the coin side of things, not so much, I only found 27 cents, all from about the time my house was built. My yard was entirely "Harley Raked" before we moved in. Just as I finished my yard, the next day the farmer came to pick up his crop. I was excited as it is much easier to search farmland after a soybean crop than a corn crop. I asked him if I could search the farm, and offered him any finds that he liked. He told me he was in no way sentimentally connected, and I could "have at it" and keep everything I found. He also directed me to 200 other acres they own near me That I could search. I set up a grid search scheme using 6 6-foot driveway markers from Lowe's that I began using about a quarter of the way through my yard when I decided that trying to figure out where I last was wasn't enough. What I did was place 3 on each side of the field, and moved two on each pass. I always have something to line up on. The later addition of the Tect o Trak app shows me how effective this is. This farm overlooks a river where a Steamboat landing was in the 1800s. Right away colonial buttons, some copper, some pewter, and some lead started turning up, and about the 10th pass I dug a sun pendant with stones for eyes. Soon I dug a 1/4 cut 2 Real coin, and then another. I also dug a 1890 half cent, and an 1879 Indian head penny. The Indian Head was in excellent shape. I also think I found a very old British copper coin that gives no details, but rings when dropped on a table. Every day it has been something, a silver plated button, a gilt one, and even one that was oval and I think solid silver. After covering about an acre and a half the finds cut off, being more iron bits (there were plenty of them everywhere along with shotgun shells and shot), and beer cans and pull tabs. I pressed on regardless and today found another decorated button which I can only assume is very old. I really like my ACE. I'm impressed by how many relics I have found. I don't see many articles here about the ACE 400, and am kinda surprised. It is not an AT Pro or Max but it sure does find things, even 10" + deep. Check out my photos, everything was found with this detector. I found the Indian head penny when checking the hole after I found the buckshot I was originally seeing, it was 10" down. Always check the hole again! One of the quirks the machine has I appreciate is the high tone you get if you pass over a low tone item too fast. I t keeps me in check. I always dig items with mixed signals. I confess that next week I will be going back over my yard with a Minelab Equinox 600. I'm hooked for sure. I will continue to post finds with the Garrett, as I plan to use it in the farm, the Equinox in the river, or whenever I think I should search an area in the farm again. I have no special settings; Zero discrimination, one bar short of full sensitivity on the farm, two in the yard. I want to hear it all. I think I am doing rather well! Any comments and suggestions are welcome. I have updated my finds cases, shown below. Merry Christmas and Happy new Year!

Posted by Mental Metal on Sept 2, 2020 2020 Garrett ACE APEX Review: What You Should Know About it. In this video I get my hands on the new APEX courtesy of Fort Bedford Metal Detectors. I answer a lot of the questions you asked about as well as VDI number testing, depth testing and more. The APEX is not for everyone but for those looking to try a Garrett or who are just getting into metal detecting the the APEX could be what you are looking for. Its probably the best ACE machine Garrett has made. Here are some of the questions I'll be answering in this video: Whats in The Box? How much Does The APEX Cost? Who is The Machine Made For? (beginners? advanced users?, middle of the road?) Is The APEX Easy to Setup? Is The APEX a Replacement for the AT PRO, Gold, or Max? Is It Waterproof? Whats Up With This Weird Viper Coil? Does the APEX Work on The Beach? Target Separation Test What Does it Sound like? Depth Tests and more questions! Professional Photos/video clips shot by Jon Lupro As promised in the video here is the link to my article that contains the results of my VDI and depth testing. https://mentalmetaldetecting.com/what...

I got this question via email: "Is it worth buying a Garrett LS Infinium?? I have a White's GM3 and a Gold Bug Pro. What say you at $550.00? My reply: The Garrett Infinium is not a bad detector, but I have to say I had more hardware failures with it than any other detector I have used. About half coil failures, and half control box failures. Since the Infinium is no longer made and all existing units are out of warranty, be careful to go with something in “like new” condition. I would not buy one that has seen much if any underwater use. $550 is ok for a spotless unit but given my previous comments seems a little high for run of the mill used units. My best advice is shop for a White's TDI SL unless you have to have waterproof. The TDI SL has similar if not better performance and is an overall better choice since they are still made. You can probably pick one up with remaining warranty at a decent price used. Given that you seem geared to prospecting with your other detectors a TDI SL would serve better for that purpose due to the large array of inexpensive coil options. If you have to have a waterproof ground balancing detector on the cheap however, the Infinium is about the only option.

Hi Ya'll! Well, I'm in Tennessee this week visiting with the family, so all I can do is read the forum and look wistfully at tide charts 'til next Wednesday. I'm shopping for a mono coil for water detecting when I get home. That stock coil is pretty hard for me to control in our usual rough surf. I've heard the 10'x14' is the best for beach/ocean, but it doesn't look any easier to sweep with than the 10' x 14' elliptical. The 8' would probably be easy in the waves, but it looks like you'd give up alot of coverage area per sweep. I've ordered a straight shaft, so that will probably help a bunch too. I'm starting to see Steve's issue with the limited coil selection. If only there was a 10" or even a 12"! I'm leaning toward the 8" right now. It would probably be more useful in Grizzly Gulch, Montana for the small gold. As always, thanks for any input. You guys are awesome.

Well, the Infinium arrived this morning, and I just couldn't wait to get some sand on the coil. So I headed for the closest beach about 1/2 mile from our house and hunted for about 3 1/2 hours. I didn't get past knee-deep as I was just trying to find some targets to dig and get used to it first. First impressions of my new Infinium: 1. I don't like the stock shaft at all. I'll be upgrading that thing ASAP. 2. Hip-mounting the control box is the way to go. My arms and shoulders are usually hurting after 3 hours of swinging the DFX, but after some food and iced tea I think I could take the Infinium out again! 3. This thing goes deeeeep. These are guess-timates on depth, but a lead sinker at about 10 inches down in wet sand? pull-tabs at 8? There were a couple of targets I just gave up on because my scoop wasn't up for it (gotta upgrade that too). The Infinium didn't find any gold or silver, but it found an abundance of junk, so the good stuff will eventually show up in the scoop too. Looking at my junk pile, I would estimate that the Infinium found me about twice as many targets as the DFX did in wet and damp sand on the same beach in the same amount of time. Yay! 4. Iron junk wasn't really a problem. I didn't try that reverse-disc thing on every target, so I dug two nails that I probably would have passed by with the DFX. One of those nails did that "double signal". I dug it anyway to see what it was. 5. I'll have to rig an external speaker of some sort on it before next summer. In Montana, people are not the top of the food chain, and I need to hear what's sneaking up behind me. 6. All that stuff I read about "hard to learn"? Nah, it seems pretty simple to me, but I've only run it at the beach, so that might be the reason. It is a little bit noisy in the shallow water, but when it hits a target for real, you know it! I was running the DFX pretty hot anyway, so I was used to it and it didn't bother me at all. 7. Gotta dust off that PADI card and probably take a refresher course at the local dive shop. This thing is going to be awesome in the water! 8. If there's a speck of gold left in a river in Montana, my Infinium is going to find it for me. It LOVES lead sinkers, which, from what I hear, are the redneck relatives of gold nuggets. The bottom line is that I REALLY like it. We all know it's a numbers game. So what I'm thinking is that double the pull-tabs will equal double the goodies in the long run. I can't wait to get in the water with it! Ya'll have a great weekend! Ammie

So, for strictly nugget hunting which one would you say is the better choice, the Garrett Infinium LS or the Minelab SD2100V2 with Doc's Gold Screamer power pack?

I have looked on KellyCo, Metal Detectors .co, e-bay, and a few other spots and can not find a listing anywhere for a cover for an 8" rd. mono coil for a Garrett Infinium. They have them for the 10"x14" DD but not the 8". Surely someone must make one?Do any of you know of a place that has them? Or do you know of some alternative to a cover that works? Any help appreciated. Thanks

Anyone know if the mono coil for a Sea Hunter II will also work on the Infinium LS? I e-mailed Kellyco and asked days ago but never heard back. Reason i asked is I have an Infinium and the 8" Sea Hunter mono coil is $85 and the same coil for the Infinium is $110 and i am looking for an 8" mono for the Infinium. Unless maybe someone here has one for sale??

Anyone using the Infinium for nugget hunting finding many nuggets with the 10"x14" mono coil or mainly the 8" mono? How about the DD's? Do the smaller coils seem to perform better than the stock 10"x14" DD? And responses appreciated. Thanks

When nugget hunting with the Garrett Infinium, are the 8" and 10"x14" mono coils better for gold than the stock 10"x14" DD? Also, how much more depth will the 10"x14" mono get that the 8" mono? Thanks for any info. I am completely new to PI machines.

Getting a Garrett Infinium PI unit from a fella. Is the Infinium a decent nugget hunter? Never have used a PI machine so it will be a new experience.

I see the Garrett website is now advertising the new ACE 400 for an msrp of $399.95. Probably a "lightweight" machine compared to most of the detectors talked about on this forum but could be one to consider for general purpose detecting such as parks, dry sand beaches, etc.

Well, if you go to the link for the Garrett Infinium on the Garrett website it is gone and not to be found any more. Looks like it finally bit the dust. The Infinium was released to vast amounts of hype in Australia that served to backfire on the detector when it finally came out. It was however the very first detector from a major manufacturer to try and challenge Minelab in the ground balancing PI department. I love what Minelab has given us over the years but at the same time I have always hoped for more vigorous competition in that area. That being the case I was on board early with the Infinium and did what I could to actually play it down in the face of the self defeating hype of the time, while yet emphasizing what it could do well. The reality is the Infinium never caught on much in the prospecting world for the same reason the ATX has not. Saddling machines with extra weight and extra expense to make them waterproof when most prospectors are desert players only works if you have cutting edge performance and so people will put up with it. In the case of the Infinium and ATX with second tier performance levels they needed to concentrate on pure desert dry land prospecting ergonomic needs and desires and unfortunately did not and have not. That being the case the Infinium found its niche in the area for which it seems best designed for, and that is a water environment. In the end it was more a beach detector or even a relic detector than a prospecting detector. The ATX clearly outperforms the Infinium but I actually preferred the Infinium case and wish the ATX were in it. Easy to hip or chest mount, largely eliminating the weight issues. Maybe the Infinium going away means a lighter weight ATX in the wings? No, I have no inside knowledge there, just on going wishful thinking on my part. Rest in peace Garrett Infinium 2002 - 2016

Hello everyone, I am new to the forum and new to metal detection, so naturally I am also full of questions. My wife purchased for me a new Garrett Infinium LS metal detector and I am just beginning to play with it. I have taken it into my back yard (which must have a million BB's in it), and the unit is working quite well. Finding BB's is super-easy. So, after a few minutes I decided to see what it would do with gold. I put two small glass containers containing gold (a tad over 1/2 oz. in small flake gold) on the ground and swept the coil over them expecting to hear a loud and distinct tone, but nope... barely a peep. I picked the gold up and swept it across the coil over and over, again hearing almost no sound at all. I passed my wedding ring across the coil and the tone was so loud it hurt my ears. A gold nugget weighing seven grains didn't even register a tone. This is with discrimination at minimum. What am I doing wrong? Why is this detector not seeing my gold?

On md-hunter its says that Garrett has added a ( i ) after each number. At first look without firing it up you can't see the difference. It's all in the new software in more ways than one If you want to learn more I'll let you go look for yourself. The only dealings I've had with Garrett Ace was when I got the 200 for my Grandson. I was surprise to see what the Ace 200 had to offer for the money. More new for 2016. Chuck