Search the Community

hi has anyone had any expierience using a minelab relichawk what i wanted to knowe was what are the opperating tones in s mode i get a fast succesion of beebs and in m mode it gets slitely slower and in L mode even slower succesion of beeps

Curious if anyone has done this comparison yet. I once had a few Xterra but they are long gone. Thinking of the little vanquish again. So has anyone compared these by chance?

Well I have always been curious about them. Have watched several videos but never held one. So are there any safari users here or has everyone jumped on the equinox wagon? All input from previous users are welcome as well Or please state the reason why you moved from the safari.

Hi folks, I've been a couple times diving in two different spots the last week and cause of a ton of new sand, working at a deeper area, less pounded by the most of the army. As usual, my camera was out of service in the moment of glory and there's no footage as I left It once and discharged another time😤... Aniway, two fishes for the week...Too bad...trust me😑 Both 18k bands

With all this talk about the GPX 6000, I’m staying with my retro detectors. I’ve found teeny ones at depth and bigger ones that took an hour to dig out. Picked up these machines from a retired detecting couple who had them as backups.....they were “new in box”. Totally unmodified except for the external tune pot on the 2100 and regulated power supply. Hooked up to the legendary light weight 18” mono Kevlar coils makes a formidable nugget hunter......no bungee required. Two detectors and six coils for 1/4 the price of the 6000. Then again, my 70 Series Landcruiser has a manual gearbox and you have to wind the windows down by hand 👍 ......

I have just joined your site and it's excellent. Over the last 3 years I have been Detecting with a V440 then a GM1000 for Gold prospecting in the back blocks of queensland australia. I have in my backyard buried coins and lead sinkers for experience and learning. I recently purchased a go find 66 to play with as I am an old coot thus I would rather walk all day and only dig down to 6in than digging all day deep down for nails. I found with the GF66 in heavy clay that it will pick up 10 and 8mm lead balls at 3in no problem but is marginal on 6mm, very iffy. Now if I use the pinpointer on the GF 66 it finds it no problem loud and clear. I am intrigued as to why. Is it using a higher frequency or a smaller virtual coil. In retrospect I feel it could be a change in volume so please ignore. ON a second observation $1 8in. $1 6in. 5c 2in. 5c 4in lead 10mm 3in. 8mm 2in. 6mm 2in. 4mm 2in GM1000 NO. NO. YES. YES. YES. YES. YES. YES GOFIND66. YES. YES. YES. YES. YES. YES. NO. NO GOFIND22 YES YES. YES. YES YES. YES. YES. 50/50 Tests done in mineralised soil GM 6 all metal. GF22. and GF66 Max. Sensitivity all metal. Interesting result. As I don't dig below 6in and prefer to spend more time covering an area than digging in lesser known locations. QUESTION. CAN YOU USE THE GF22 8in coil on the GF66 if you made an adapter?

I'm in a bad way.....when I can't detect I look at detectors and when I look at detectors I end up buying detectors. Now I've got an Xterra 705 on the way. I told my wife I was buying something light weight for her.....we will see if she remembers and gives me the normal big eye roll when it shows up at the door or a chewing out. She does like to detect, so it will be a fresh air outing, even if we don't detect very long or find anything. Not always been a fan of the Xterra but it will do what I want it to do, which is give me a nice powerful all metal mode with a iron mask option. HH Mike

I could not wait to get back to my spot at the beach. The GPX was on fire!!! I had an idea that I would revisit the spot I did previously, and try and get the faintest targets that I could hear through the moderate EMI. I was hoping they would be silver dimes, as they are the smallest and possibly hardest to hear. I also wanted to remove some very big iron that took up a good section of this spot. I thought it may be masking a lot, since this is a target rich area. Even though I had reasoned my strategy in my head, I did not expect these results. When I did a lot of park/school hunting we would always shoot for type trifectas, I never did that on a beach since it happens rather rarely. I did not expect the cent, nickel, dime, and half dollar trifecta. Just missed the quarter as I did not get the barber quarter. Surprised with the Indian, V nickel, and barber half mostly. The big iron hid 3 silver dimes, some other cents and nickels and the Barber Half. I wasn't even mad about the 2 zincs that seem to always spoil my hunts 😄 If the weather holds out next week, I will hit this area again, mostly to see if it will still hold anything and because the rest of the beach seems to not have lost as much sand as this area did. I spent 8 hours digging and another half hour looking for a lost wedding band in the parking lot for a nice old couple. I could tell they were very sad, since they were pacing the lot. I did not find it and they were not sure if she lost it there or from leaving the house. If they lost it on the boardwalk, it would easily be spotted by someone walking. A great day, very warm and sunny and as always, it’s nice to get out and hunt for the day.

It seems most like FBS machines but a good V3i hunter could maybe make this machine shine for silver.I never had a V3i.

Thoughts? Customer sent me this, looks more like a Military unit. Not the GPX 6000 look I expected. A prospecting store in Australia has this info, a customer sent it to me to check out - https://tryhardprospecting.com.au/is-this-the-ultimate-sdc-aka-mf5/

http://dankowskidetectors.com/discussions/list.php?2 ####### Thread titled Minelab Equinox owners, page 12. ######### Tom Dankowski is looking for input , in performance and design on the next Minelab Flagship detector. Tom has input with Minelab. Pop on over to Toms forum and read the thread, and post your ideas. I started a post about 25 posts down on this thread, about new ideas for the new Equinox. Not realizing they are looking for ideas. Reading the post by Tom about being able to add target density into ID is awesome. Who knows what else the engineers are working on. Check it out ! Steve , I'm not trying to steer folks away from your awesome forum.

"The proper threshold on hot ground, any ground type for that matter, is a nice and high full sound, stable and rock solid threshold that cannot be wavered on that ground type.. Allowing the highest sensitivity they can muster. Causing lovely repeatable dropouts in the threshold on deep signals on heavy ground." Hello All. I have an old Minelab GT16000, and in the process of searching for Coils, came across a post(above) by "argyle" that suggested a completely different Threshold setup for some of the early VLF detectors including mine. Just wondering if anyone has used this procedure, as it is different to the manufacturer's instruction? Cheers.

Hi guys ! Yes, I am a beach hunter, but I was invited to metall detecing on a WW1 field... So the beach hunter I am was suddenly contemplating a huge corn field which has seen some ww1 Action... I chose to hunt before noon (2 hours) with the Equinox 800, and two hours in the afternoon with the Safari I happened to win at a detection rally two weeks ago. As you can tell from the posted pics, the Nox Found 18 targets, the Safari 32, but i felt the afternoon search was richer in targets...The best find of the day was a silver King Leopold II 1867 2 Francs (Belgium), a very rare coin, as it has only been minted from 1866-1868 The nox got more tiny targets (low conductors), but the Safari was able to find some tiny targets too. I don't know what to think about the results about both detectors, but they are very close in my opinion. Those are the pics of this outing (round bullets are belgian, the others are german). Happy hunting !

I saw one of these for sale for basically $200 + shipping. Is that a good deal? What's the typical resale price (Fair Market Value) for a machine like that? Thanks!

I've been out of commission for the last couple of months with a broken ankle. While I was laid up, I did a couple of mods to a couple of Explorer's I bought last month. I stole the idea from Kevin(IDX Monster), thanks again! I finally healed up enough to hobble down by a lake near my house and do some digging. I ran it with gain set at 7...16 manual sens...variability set at 10...conductive tone...fast recovery....no disc..... manual noise cancel at 1...Minelab 8" coil. One thing I did find out real quick was how fast it is to get out of shape. Anyway, set out to dig it all and relearn the Explorer and test out the equipment. I've running the Nox 800 for the last 2 years. The chestmount setup works like a charm with no hiccups to speak of. I'm running wireless earbuds that are APTX LL and the transmitter is also APTX LL, no noticeable lag. The battery is mounted on the back of the housing and is a 12v 3000 mah power bank. I tested it and it ran for about 15 hours with the back light on, full threshold, full sensitivity, in the garage with 11"coil mounted. I'm very pleased with how smooth the set-up works and was able to dig a couple of keepers while testing it out. The finds are from 2 outings, I found a silver ring and a silver bead the first time out and 2 more of the silver beads and another silver ring , along with the other items today. I'm thinking the silver beads were part of a bracelet or necklace as they were spread out from where I found the first one. One of them rang at 2/30 the first one 5/28, I was surprised at how hard the Explorer hit such small items. Feels good to be swinging a coil again, gonna take the monster old coin hunting tomorrow.