Jump to content

Search the Community

Showing results for tags 'minelab gpx'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Metal Detecting & Gold Prospecting Forums
    • Meet & Greet
    • Detector Prospector Forum
    • Metal Detecting For Coins & Relics
    • Metal Detecting For Jewelry
    • Metal Detector Advice & Comparisons
    • Metal Detecting & Prospecting Classifieds
    • Compass, D-Tex, Tesoro, Etc.
    • First Texas - Bounty Hunter, Fisher & Teknetics
    • Garrett Metal Detectors
    • Minelab Metal Detectors
    • Nokta / Makro Metal Detectors
    • Tarsacci Metal Detectors
    • White's Metal Detectors
    • XP Metal Detectors
    • Metal Detecting For Meteorites
    • Gold Panning, Sluicing, Dredging, Drywashing, Etc
    • Rocks, Minerals, Gems & Geology

Categories

  • Best of Forums
  • Gold Prospecting
  • Steve's Guides
  • Steve's Mining Journal
  • Steve's Reviews

Categories

  • Metal Detector Reviews

Categories

  • Free Books
  • Bounty Hunter
  • Fisher Labs
  • Garrett Electronics
  • Keene Engineering
  • Minelab Electronics
  • Miscellaneous
  • Nokta/Makro
  • Teknetics
  • Tesoro Electronics
  • White's Electronics
  • XP Metal Detectors
  • Metal Detector Settings

Calendars

  • Calendar

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


Website URL


Facebook


YouTube


Instagram


Twitter


Pinterest


LinkedIn


Skype


Location:


Interests:


Gear Used:

  1. Is there or has there been any comparison testing done in the field on depth with the 6000 vs the 7000 using the NF 12" Z-search coil. Thanks . . .
  2. Early wet Weather in Northern Nevada, sure messed up a few of my hunts! But, this last Hunt was called Rain or Shine! Be there or miss out with the original hunting party. We had half the amount of coils on the ground during this hunt and managed to find a few sweet spots of dinks to add to our pokes. Rain on us with snow in the ground 200’ above us all 4-Days! 6000, Retune Button got a workout. I kept the 11” Mono on. Tried the DD for a few hours with no luck, don’t know if the ground and line I took was bad, but the guys behind me where finding nuggets…so back to the 11”. My truck is out in the drive way in the wet Weather still loaded up with me gear! Getting wet again to unload it, I can’t wait 🤨 Until the next Hunt! LuckyLundy
  3. So some of you know that my 6000 arrived defective right out of the box and that I sent it back to be replaced the morning after I got it. Well the new replacement arrived yesterday and the detector works as I assume it should. Well, at least it will sound off on a nugget, so I assume it is working properly. I have the 14" DD on to test that out. When I picked up the 11" to pull it out of it's plastic bag, I noticed something odd on the top of the coil. There was a crescent shaped crack in the coil. What in the world is going on with Minelab and their quality control.?!! People spend thousands upon thousands of dollars on their detectors, you would think they would be more strict and precise with their quality control procedures. I sent the 11" coil back to be replaced, this morning at 9 am. It is possible it could have happened in shipping, however the inner box and shipping box were in great condition. No smashed areas anywhere on the boxes. Anyone else want to chime in about their particular Minelab detector defect. If Minelab is reading this, you have alot of people out there spending alot of money on your detectors because they are the best-Hands down, but it seems like since the sdc2300 came out the quality control is going down hill. I understand some defects can get by or crop up over a little bit of use, but this is not good.
  4. Hey All - I can confirm we will definitely be making coils and release will be in first half of 2022. Coiltek Quality - Fully Minelab Approved and no need to break a coil to make a coil. We will be releasing more info on this in the coming months. Stay safe everyone. Trevor.
  5. Hey all, still have a gpx 4000 I bought from AK M&D. Guess it's time for an upgrade. My Question is does the 4500 have enough improvements to justify the upgrade
  6. So, my beach season hunting has officially started. I was going to shoot for two days hunting but a wash out on Thursday made me change some plans. I had reserved Thursday for the GPX 6000 and the 14” DD coil, but had to settle for trying the 6000, 5000 and Equinox on Friday. I changed beach locations too and ended up at the less EMI beach for the day. Started out using the GPX 5000 for clearing out some of the recently deposited junk in an area that has produced silver before. I thought the storms that ripped through the previous day would remove some sand, but it was just the opposite…. sand deposited along 3/4 of the beach (top to bottom). Also, high tide reach to the highest point of the beach, so I could only hunt where the waves did not constantly reach up top. The 5000 did well considering the beach was really sanded in and gave me my first silver of the season – a 1955 Washington quarter. The rest was clad, but for 2 copper pennies. Some junk jewelry, and maybe some iron shot or just a ball bearing, - it measured .75 caliber. The big spoon was found at 20” and I thought I was going to get a beer can or some big iron, so that was a nice surprise. Hunted with the 5000 for 6 hours and decided I cleared enough to try the 6000 in that spot. The EMI was a bit more than usual but not really bad. I’m still not sold on that 14” coil. I tried both ground settings, as well as both Salt mode and EMI mode. I tried auto, auto +, manual (full) and manual (setting 1) and some in between. I just could not get the 6000 to not false on the sand. It was partially damp, as high tide receded a while ago, but with a sensitivity of 1, I would have expected a smooth clean machine. IDK maybe the coil is not good. I did not bring the 11” mono as I really wanted to see if the salt mode would work on the 14” DD. Being a bit disappointed, and after trying all combinations of settings, I called it after around 10 minutes. So, the tide was getting as low as it was going to be, so I hunted for 3 hours with the Equinox and traded my spade for my scoop. I didn’t use the Nox much last season as the 5000 was killing the silver, so the Nox sat idle. But I wanted to see if the heavy waves dropped anything on the beach along with all that sand. There weren’t many targets, so I dug everything to get a feel for all the numbers. The hairpins and tiny wire all read a steady -2, -3. The Nox did well for the short time I used it and if I wasn’t beat from the hunt, I would have stayed in the area that was producing some coins. It was the best machine for the day to give me a chance at some gold. It felt really, really good to get out and just walk the beach. Next week all 3 machines will be at the crazy EMI beach. I will have the mono coin and the DD to see if this beach (dry sand) will be ok for the 14” coil. Can’t wait!!!
  7. I was pretty excited about this one so I couldn't resist posting the video of it, it's a 12x6" prototype test coil being used on the GPX 6000 to find gold, it found 3 bits on it's first run. This was one of my favourite coils on the older model GPX and if I end up with the new GPX it will be a size I'd have to have. It's long sensitive nose was great getting up between the rocks I regularly hunt in. This is purely for information for those interested in following the progress of the coils. These coils are not being sold by them yet, it's in a testing stage and they will require an adapter which involves removing a chip from the original coil. You'll see in the photo the adapter inline on the coil cable which has the chip in it that was removed from the standard mono coil. And the video The 3 bits of gold found while testing it. The one to the left was the one found in the video.
  8. After reading all items available I am confused. It's probably just me so I apologize if this is a dumb question. In soil that has low mineralization which coil will go deeper and is more suitable, a DD coil or a mono coil of equal size? Or in low mineralization does it not matter if you use a DD or a mono coil? Bill
  9. Is there or has there been any comparison testing done in the field on depth with the 6000 vs the 7000 using the NF 12" Z-search coil. Thanks . . .
  10. I had something strange happen, today. I had my GPX 6000 battery fully charged and fresh off the charger. It had completed its charge cycle and then trickle charged overnight. I popped it in the detector and started detecting. Within five minutes the battery meter dropped from three bars to two bars. If I turned off the detector and let it sit for a 5-10 minutes and then turned it back on, it would go back up to three bars for a short period of time before then going back to two bars. Has anyone else noticed this with theirs?
  11. I haven't seen very much conversation about the comparison between these two detectors now that the GPX 6000 is creeping into the SDC 2300's territory. So far, the GPX gets both smaller and deeper gold. Has anyone other observations?
  12. Who has run the sp01 on their 6 I had a crack , with my cogs as well , but found the cables a pain in the arse ... Also with the 6,s headphones on 70% volume on the phonesand the detector backed off a tad I hear the feint murmurs ok I reckon anyway 😃 I
  13. Yes I finally did get a chance to hunt for larger gold with the GPX-6000. This video has some quirks and I am sorry. Shooting video is not my expertise as you can tell. Error #1 and many of us do it. Keep the phone Horizontal (left to right) to get full size viewing. Error #2, be sure to have someone else shooting the video while holding camera Horizontal and not shaking as much. Now for the bit of info that many of you may have missed in this video. I won't reply with answer yet, but will give a hint "sound". So yes a get a little excited and yes I mumble and stumble for words. Heck I sometimes freeze up and slowly look around to make sure nobody sees it or me. I have heard other do that as well, why? What would you do?
  14. as I already put in another post, I just bought a second-hand gpx 5000. It comes with the comander 11 DD and 11Mono coils. I would like if it is possible for a colleague to recommend a coil to complement the ones it brings. Its use would be to search for coins. I've been looking at the detech 15 inch DD ultra sensing. If anyone has used it, what can you tell me about it?
  15. Has anybody done a quick air test on a U.S. Quarter or other large target with Normal vs Difficult Timings? I have tested Normal vs Difficult and found that Normal is not deeper than difficult on large targets. (Manual 10 or Auto +1 Sensitivity) I also get very broken or confused signals while using Normal at fringe depths while Difficult gives nice & clear high-low signals. Do others notice normal timing giving greater depth on large targets over difficult timings on the 6000? (There may be something wrong with my 6000. In addition to Normal giving zero extra depth for me, I have received an intermittent "coil error" with both the 11" & 17" mono coil. This usually happens after using the machine for some time in the field and once it starts, it won't stop even with a full factory reset. I have the machine scheduled to go back to Minelab and I am hoping they can reproduce the "coil error" fault I keep getting.) -Don
  16. From a ground murmur to a waahhh ... around 7 inches deep 🤗
  17. Hi all. A fella I know, who we will call Jim, has been given (yes GIVEN!!) a GPX 5000 and has asked me for help to set it up. I think it is a year or so old but never been used as the original owner is unwell. I recently helped my sister's boyfriend who had issues with his 4500 so had roughly read the manual. The 4500 actually had a speaker issue as well so although we got it working OK the Threshold was still quiet. My less than expert diagnosis (from a bit of research here and PA Forum) was that his curly cord might be a bit defective and it isn't boosting the audio to the speaker. Anyway, I stopped around the other night and helped the bloke with the 5000 as best as I could having roughly ready the manual again. Now this bloke is technology illiterate and is not someone who is going to sit down and read or understand the 112 pages of the Minelab GPX 5000 manual. I did give him a print out of Steve H's GPX 5000 bit from the Detector Review area of this forum but even that is beyond him (the Timings/Mineralisation diagram for example). So, I have set the 5000 up to a point where the Threshold is humming nicely and we were finding targets in the bush quite easily. With the 5000 are an 11" mono Commander and I think it was a 17"X11" mono Commander. No DD which I thought was unusual but maybe they came in a package without a DD? The original owner might still have a few bits and pieces too as it seemed there were a few things missing. Have written up what I think are the absolute essentials for Jim to know about and change if he feels confident to do so. There are sooooo many controls on a 5000 that I feel like a 5 year old is in control of the cabin of a jumbo jet! The following is 112 pages condensed down to 2 😳 Wondering if those with the knowledge would be happy to peruse it and advise if they think it is a reasonable synopsis of all that is important. I have left out anything which I don't think is imperative for Jim to know or play with - at least at the start anyway. Things like battery voltage, etc. Have left many other things like Target Volume at factory presets. I also don't want it running really hot and Jim digging lots of ghost signals. So are my timings suggestions reasonable for moderate mineralisation ground with some hot rocks, moderate amounts of red, wet clay, etc? I generally cannot run Normal mode on the GPZ or the GPX6 in the local area if that is some guide. Rx Gain and Stabilizer - I think this is maybe going to raise the most discussion 😀 I have another old mate over near Mt Beauty that has a 5000 but he is a bit the same as Jim as he has no idea about technology either. But, he does find more than his fair share of gold and his detector runs very smooth and appears particularly sensitive to genuine targets without digging a lot of ground noise. He was previously running his 5000's Rx Gain and Stabilizer at settings provided by the dealer he had purchased off. He was then told by another old bloke to try the Stabilizer at half of the Rx Gain. Whatever the Rx Gain was, make the Stabilizer half. So that is what he has done ever since and he feels it is heaps better. Having never used a GPX 4500 or 5000 other than twice in the past 2 weeks I would really appreciate some constructive feedback before I pass this on to Jim 🙏 Cheers, N.E. GPX 5000. Front Panel:: Search Mode: Choose General. Deep is for detecting a small area slowly and carefully. Custom - then provides you with Patch, Hi-Mineral, Hi-Trash and Pinpoint. Soil/Timings: Normal - best wide range of performance. Enhance - cancels most ground noise and hot rocks. Special - If you choose Special on the Front Panel the following settings will then be available on the Rear Panel. - Sensitive Smooth - For severe soils. - Fine Gold - Good for small gold in mineralised soil. Ignores a lot of hot rocks and ground signal. - Sensitive Extra - Can increase hot rock signals. Better for mild ground. Good with Double D coils. - Salt/Gold - For very salty areas - salt lakes, high salt content gold fields, beach. - Sharp - More powerful but will increase false signals. - Coin/Relic - For low mineralisation areas. Poor ground balancing ability in high mineralisation. My suggestion is to start in Enhance. Could also try Special (Front Panel) and then Fine Gold (Rear Panel). Coil/Rx: Double D. Mono. Use this always unless you actually use a Double D coil. Cancel. Ground Balance: Tracking or Fixed - use Tracking. Back Panel:: I have only covered the things which you might need to alter from the Factory Preset settings. Rx Gain: Has a Range of 1 - 20. Adjust upwards until the Threshold starts to break up/get wobbly and then slightly reduce until the Threshold is stable again. Stabiliser: As Stabiliser increases it increases the sound of faint signals. But, it also increases the sound of EMI and ground noise, etc. Old mate thinks it should be half of what Rx Gain is. So if Rx Gain is at 10, then set your Stabiliser at 5. Audio Tone: Set it to suit your hearing. Factory Press is 50 but lower tones for older people can be better. On a day of detecting: Set up your Front Panel - Search Mode - Soil/Timings - Coil Rx - Ground Balance. Turn on the detector. Set the Threshold so that you can hear it easily. Do an Auto-Tune. If the Threshold is not nice and quiet - do it again. If it is still noisy check you Rx Gain and try turning it down. Set your Rx Gain (rear Panel) so that it is as high as you can go without the Threshold being wobbly. Set your Stabilizer at half of the Rx Gain. Perform a Ground Balance. Turn the Threshold down so it is just an audible Mozzie Hum. Start detecting.
  18. I have no problem with coil twisting and I am using the 17” now. I think people who are having a problem are not tightening down hard enough. The shafts are carbon fiber you’re not going to break them tighten the clamp as tight as it can possibly get. If you’re just weakly tightening it down then you are going to have some twist. Quite honestly if you wanted to drill a hole and put a pin in yourself it would not be a big deal but I think it defeats the purpose when you want to tighten up the cord by giving it a twist before engaging the locks. So far I’m satisfied with it. Keep this in mind to if you think you can actually tighten it to the point where you’re going to break it it’s under warranty for three years! But if you drill the hole it’s probably not under warranty anymore.
  19. Hi there, Looking at getting another detector for the Golden Triangle in Australia. Have a vlf but looking at either a new sdc2300 or a 2nd hand gpx4500 for marginally cheaper. Which one would better to learn PI with, and which one performs better? Cheers
  20. I don't know how many 6000s are already 'in the system' as complete units in the box ready for use but the Covid count in Malaysia is forcing them to shut down some things. https://www.newsweek.com/malaysia-sets-new-covid-case-record-amid-concerns-about-new-variant-1594595 Be prepared for a long wait with the chip shortage.
  21. Please help me out with some GPX experiences. Living in the eastern US I don`t have the opportunity to use the 5000 much. I try to do two or three trips a year in gold country, so my actual time on the machine is limited compared to those who can get out more often, so any advice or helpful hints are much appreciated to shorten the learning curve.
  22. I've been reading about DD and mono coils for the GPX. I'm confused
  23. First off, a big thank you to all of you who have provided your in the field experiences as well as tips and tricks and troubleshooting info on this forum and elsewhere. Rigging up the new detector coil, I knew to screw and push the coil cable in 3 times and then continue to tighten it down fully, to use the factory reset if needed and that lower sensitivity still provided plenty of power. 🎇🏆 Everything else was pretty easy. This detector swings great and is simple to use! The availability of the extra batteries and 17in mono coil in the USA finally are what made me jump in and get all of the accessories at once, even though I generally don't care to be an early adopter for electronics. I knew I couldn't go wrong with all of the good reports from all of you here on DP and everywhere on the internet. So, I took out my new GPX6000 today to an area I've had success in the past. I had one fully charged battery and the spare was 1/4 charged. I used the 17x13 the entire time, even though the 11in was in my pack if needed. I was able to run normal timing at around a sensitivity level of 5. Higher and things got a little noisy, so I just went with this set up for the first trip. I was pleasantly surprised I didn't have to run in difficult timing. It was very simple to use and coming from a background of running a GPX5000 the past 3 years, it really was a breeze to get right to detecting and not worry at all about controls. The machine ran great! I had zero hiccups, no loss of audio using the wireless headphones, etc. It didn't fall over all day even placed on slopes or atop rocks, unlike some of my other no-so-ergonomic gold detectors. Apart from becoming noisy and performing noise cancels as needed, I restarted the unit to factory settings around midday when it got a little squirrely and after that it behaved the rest of the day. I got in 9 hours of searching and the extra battery was enough to get me through until quitting time. I ended up with 5 nuggets walking along some steep creeks. None were huge, but all decent sized. This spot generally seems to lack tiny gold, as the slope I assume lets the lighter gold blast right through the area during high water. I'm not too surprised no sub .1g pieces popped up. None found were too deep, maybe 5-6 inches on the largest one, but signals were unmistakable, even if faint. I look forward to more outings soon, especially as its now the fall season and cooler days are just around the corner!
×
×
  • Create New...