Wtb White's Pi Control Box Cover

[Compass]

I was looking at my old PI Pro that I use as a loaner and was surprised to find a crack in the control box cover that might compromise its waterproofness. Someone out there may have a non-working PI Pro (or Dual Field) that is only good for parts and willing to sell me the box cover for $30? The covers are the same for a number of White's PI detectors - just with different decals and the covers are easily removed (no tools required). The dimensions are approximately 4" x 6-3/8", Thanks!

[TC-AZ]

I would try a slow setting (5-7 min) epoxy for repair of coils and such... the kind that model builders use. It comes in various consistencies from gel to watery. That's if you like to DYI or can't find an extra cover.

Hey a little dab will do you 😀

TC-AZ

[Compass]

On 11/14/2023 at 7:13 AM, Compass said:

I was looking at my old PI Pro that I use as a loaner and was surprised to find a crack in the control box cover that might compromise its waterproofness. Someone out there may have a non-working PI Pro (or Dual Field) that is only good for parts and willing to sell me the box cover for $30? The covers are the same for a number of White's PI detectors - just with different decals and the covers are easily removed (no tools required). The dimensions are approximately 4" x 6-3/8", Thanks!

Much appreciated TC-AZ.

[Steve Herschbach]

There were two cover designs. The old cover had a black o-ring and were more prone to cracking. The newer covers used the red o-ring and were supposedly less prone to cracking. So if you find a cover make sure it’s the same as the newer design you have.