Jump to content

grumpy

Member
  • Posts

    8
  • Joined

  • Last visited

 Content Type 

Forums

Detector Prospector Home

Detector Database

Downloads

Posts posted by grumpy

  1. well i am starting to get my head around the 5000

    thanks phrunt for the help with the timing charts and also to steve for his write on the use of the detector

    it was just what this non electronic tech bloke needed

    i have watched a few videos on it and they are changing this and changing that ,that is where i was getting confused 

    but steve's write up about in laymans terms is what this bloke  needed to put me on the straight and narrow

    i have not been to the gold fields yet ,but i have some very trying soils at a mates farm that i have been using my test pieces at ,i have found flour gold in the pan in the creeks there but nothing else (the area is only known for very fine flour gold )

    the ground varies from extreme iron stone(pebbles) to yellow clay with just about everything thrown in between

    i am using the method that steve mentioned ( leave the settings alone )

    i have been running it in factory presets with the 11" mono coil supplied 

    what i have ben doing is in each area the soil conditions change i bury my test pieces at the same depth and use the different timings at each area and noting what the changes are in the area 

    there is a pattern forming with the timing changes as phrunt and steve explained 

    the only time i change any settings is when i have a practice run with the nugget finder sadie coil 

    i was giving some settings for the sadie coil from a full time prospector i know 

    and the only thing i change with those setting is the starting point for the timings for different areas 

    know i understand what he was saying once the setting were put in for the sadie coil LEAVE THE BLOODY SETTINGS ALONE 

    thanks guys for your help 

    cheers 

     

    grumpy

  2. hi good amount

    if you are using old leaf spring and you do not destress and anneal it before welding it

    is usually not a good idea to weld across the face of the tine as it can create a shear point just blow or above the weld

    leave the old point on the pick, shorten it and taper it to fit neat with the new point on top/or below the old point and only weld the sides not the face 

    you could leave 2 or 3 inches of the old pick point to weld the new one to

  3. yes it is a bit rugged rrvpopeye

    the chinese mined it in 1860 ,they had 3 shafts/mines there and the most profitable of them they took 1 ton of gold from it 

    the mullock heaps cover roughly a area of 500 yards long and about 122 yards wide and from about 60 feet high to ground level so there is plenty of places to break a neck if one is not careful 

    the gold mainly is found by raking the mullock heaps and detecting (mainly speccies)

    when i went there that day i took the 5000 only, and  in hind sight i should have taken the gold kruzer as well 

    the 5000 was alright to use on the side of the hills but not the mullock heaps ,some of them are quite steep 

    another couple of piccys of the place

     

    20230905_084426.jpg

    20230905_090106.jpg

    20230905_111637.jpg

    20230905_084824.jpg

  4. a mate had one also rvpopeye that's why i bought it ,the machine he had picked up the nugget no worries 

    no matter what we done with the one i bought it just didn't want to play ball so it became a wall ornament and i went back to my pans and sluice  

  5. thanks for the welcome rvpopeye

    i am sure i will get there one day ,wash rinse repeat as they say 

    i have been called grumpy since i was 3 years old

    my family found out early that it was not a good idea to poke the bear 😊

    their actions always caused a reaction and quite often they did not like the reaction so hence forth you are now grumpy🤣

    i bought a garrett at pro international when they arrived here years ago

    i was disappointed with it ,i had a 1.4 gram nugget and it would be as quiet as a church mouse so i sent it back to them 

    i got it back about 4 weeks later with the all good to go report ,same s@#t different day could not get it to pick up gold at all

    so i said well if that's metal detecting they can have it, hung it on the wall of the shed and it is still there today

    i am going to donate it to my sisters grand daughter for relic hunting

  6. thanks for the welcome phrunt

    a mate on another forum pushed me towards the 5000 i was looking at a used 4800

    he has had detectors since way back in the dark ages ,and said once i work out how to use it i will not be disappointed 

    the problem is the distance to the gold fields from where i live to have a play is a challenge 

    4 to 5 hour drive south one way or a 9 to 10 hour drive north one way ,so it wont be a quick trip 

    i have fig tree camp 1and 1/2 hours drive west one way ,which i have visited once with the 500020230905_084423.thumb.jpg.df9d86c9fb59d680447244e56ac60f70.jpg

    i am not quite sure if the 5000 is the go on mullock heaps like this but my dogy hips and back sure did not like it

    but gold gods were not with me that day but the 16"x7/8" bolt gods sat on my shoulder all day ,lucky me got three of them for the day 🤣 with the deepest at about 2 foot , the 5000 did not miss them 

    with the first one i thought ,here's my retirement stone but it was not to be the case 😞 or well another day

  7. g'day to  everyone from queensland in aus

    i am usually a panner but about 14 months ago i bought my first detector ,a nokta gold kruzer to compliment my creek and river work, what a top little machine it turned out to be 

    but sometimes it was left wanting in some of the highly mineralised soils here, so after some chatting with a top detector operator mate  he advised me to get a gpx5000 

    so a brand new machine landed here in june last year

    now i have that headache of working the twists and turns on how to use the machine ,i am not very well educated with the electronics world ,i may struggle here and there but with the right push from the right people i am sure i will get there

    so looking forward to reading posts and also adding to the forum when i can

    cheers all

    grumpy

×
×
  • Create New...