Kiwi RU
-
Posts
10 -
Joined
-
Last visited
Content Type
Forums
Detector Prospector Home
Detector Database
Downloads
Posts posted by Kiwi RU
-
-
I have a set of Ukraine CF shafts which had round rubber washers on the shaft unlike the ML ones. Talked to a dealer on his thoughts about what caused the ears to break,his thoughts were the rubber wears slightly and allows the the ears to bend in when tightened. On my shaft I have thrown away the rubber ones and replaced them with plastic washers that don’t compress and don’t seem to wear. These are a neat fit between the coil ears and require very little pressure to hold the coil firm. Have been using this system for several months now with no problems.
-
Have spent many years fabricating equipment for aircraft and boats.Any round section has a very poor aerodynamic shape. The best shape is like an aircraft wing. I would imagine this shape could be produced in carbon fibre or extruded plastic and make a big difference on drag when used in the water.
-
Hi got agree with you about the Nox,like you only the pod and coil are original on my Nox as well which I purchased imainly for its gold ability’s. Have had Nokta Racer 1&2, Impact and now the Anfibio,all well built and have dug a lot of silver coins with them and half sov a lot of which come from the Deep South which we visit at least yearly in our camper,would probably heading that way now except for Covid,hopefully we will get away soon.
-
Great information on a large range of detectors,have you done a comparative test between the Nox800 and the Anfibio Multi as I have both?
Still haven’t made my mind which is best for coins,both seem to be similar in depth with the Anfibio way better in build quality. I think you may live here in Marlborough too, if so you are welcome to borrow mine to do a comparison test between the two if you are interested.
-
Bit of a mistake on posting this,photo,should of gone on the first page
-
-
Hi All,has anyone purchased these on EBay,ordered one and took 20 days to arrive from the Ukraine to NewZealand,Quality appears to be excellent except for the armcup so fabricated a new assembly in alloy to add a bit of bling and welded in a shelf to take a power bank which is held in by a couple of rubber bands. The balance is now a lot better with the 10” coil.
-
Ongoing Equinox Coil Ear Breakage Issue
in Minelab Equinox Forum
Posted
Plastic is about 3mm thick,cut it out of a sheet with a hole saw,not sure how to describe the plastic but would say medium hard. Packed it out with some thin plastic sheet till it was a close fit in the coil slot,put a tiny blob of glue to hold it all from falling out.