LipCa

I would have thought maybe a day would have long enough for the edit feature? 

I usually edit within about 15 minutes.

My wallet stays in my pocket while detecting.  In almost 60 years of having a wallet, I've yet to lose it. 

As for keys, I carry two sets in my pockets and one elsewhere that is accessible.

In the water, wallet stays dry in vehicle most of the time.

And I always place a  visibly empty box of cartridges on the dash. 

It is obvious..... it is a water powered brush?

Are you kidding?  Just go detect the thing!

If they are "hard" floats, I wouldn't think you would have to put any air in them?  I never did in many years of dredging.....

I think a "Notice of Intent" (NOI) that Jim is referring too is different than a "Notice of Intent to Hold Mining Claim"  (Probably incorrectly referred to as NOI?)

As Clay stated for the first year of location: "The federal mining claims year ends on August 31 so if you located your claim before September 1st you will still have to pay or submit a small miners certificate.

If you submitted a small miner's waiver certificate at the BLM before September 1st you will need to record an Notice of Intent to Hold Mining Claim with the County Recorder before your State mandated deadline.*

A copy of that Intent to Hold must be filed along with the $10 fee per claim at the BLM State office on or before December 30 of the same year" 

I took a torch and cut both sides off on mine.  That guy you(Jin) saw stole my idea.

Fortunately, the only coins of any value I've found were a half a dozen gold coins and they cleaned up just fine under a stream of water in the kitchen sink(no brushing).   As all but one are EF or AU, any future cleaning will not be done by me.

As a side note, I found a really nice 1898 Indian Head penny once.   In the field it looked like it was not worn at all.

I cleaned it up in the kitchen sink with a soft brush and dish soap.  When done, I could not even read the date any more!!  The dish soap had taken all the surface off!   Who would have thought that would happen?   Never again......

Nice finds kac.  Just looked at one of those III cent pieces I have close by.   It is 1851.  Have another that I think is 1861 Probably brought from your area during the gold rush.

I bought a couple of those kits for my(and my sons) Gold Bug 2.  A quick switchover and now fits in a backpack better.

Oldmancoyote1.......,  you didn't say if you found any gold for your effort.... but, if you did you probably wouldn't be asking the questions.

If you didn't find any, I'd be looking for easier gold.  I wouldn't be moving yards of overburden hoping for gold on the bedrock.

You might start where the bedrock is exposed and work towards the center of the stream on the bedrock. Maybe a couple feet wide until you have convinced  yourself you need to find another area.  Remember, gold is not usually evenly distributed throughout the stream.  Sometimes only on one side or in the middle. 

You are sure that your recovery system is working... right?

I think this is what they call "prospecting".....  How have you tested the top layers?  Have you ran a half cubic yard through your box or just done sample pans? 

Do you have any indication of how far it is to bedrock? If it is more than a couple feet, you got a lot of work ahead of you!

What makes you think you "may" have found the right spot in the first place? It doesn't sound like you know what is on bedrock.....

More info and we might be able to help you better

Flowdog, that was not the term I had heard.  But thanks to everyone for the information.

I made a call to BLM in Sacramento and they gave me this procedure....  First off, this is an association claim which requires 4 individuals.

They said to remove the person that died with a Death Certificate and a letter from the surviving spouse stating that she is the sole heir to his estate. Then quitclaim her interest to both of my sons.

They said they do not go by "percentage" of interest but by the number of individuals on the claim. In the end, I have 4 names on the claim.

I don't believe there is an estate for the deceased husband.  I think the surviving spouse takes ownership of everything.  At least that is what I've seen happen. ??  I think there is a "term" for that but I don't know what it is.

In my case, a husband and wife were on an association claim with me. The husband died and the wife wants out.  She wants to give their interest to two of my sons.  I guess we could do a Grant Deed but I thought you used Quitclaim deeds on claims?

Has anyone come across a good quitclaim deed for transferring ownership of mining claims?  This would be for California.

Tons of forms on internet but was wondering if anyone found a specific one that worked great.

Thanks.

You are right about nothing being in the lower 8" or so. When I got my second LeTrap, the first thing I did was cut off the lower section.

On the full length one, just before I got ready to empty it, I would flush out the bottom 4 riffles.  That much less to pan.

link doesn't work for me.....

Not fun vacuuming up a broken glass vial of gold off the tile floor at home either!! 

this link might help.... http://new49ers.x10host.com/phpBB3/viewtopic.php?f=6&t=93

A link to Texas State Park regulations:  https://tpwd.texas.gov/publications/pwdpubs/media/pwd_br_p4000_0000a.pdf

You will notice that metal detection is not allowed without a permit

Maybe you can still get in the ICMJ show in CA?

45 minutes ago, Steve Herschbach said:

Stay invisible

Yes!!

21 hours ago, Steve Herschbach said:

The 6.5hp P180 will power a 5” subsurface dredge but is to weak for an above water sluice

I have to assume you are saying that it is to weak to power a 5" dredge.... That setup certainly ran my 4" good.

If you know that it is a cache of gold coins that you are looking for, I'd get a two box detector,  If you are up against foundations, walls, etc., use the 3030