stateguy

What does everyone use there ferrous volume and pitch at. 
what are you trying too accomplish with that setting. 
I am trying to distinguish bottle caps better. 
if you have another option how too tell them from another option 

I found one of those exact Cartier ring. Did your have a serial number in it. 
mine didn’t others that have found fake ones did have a number. 
with the namer Cartier I would think there would be serial number. My gold tester doesn’t work properly so I am unsure if it’s real

weighed about 5 penny weight. Not sure what that is in grams 

I definitely need more time with the machine. 
i more or less can tell by looking at the screen  
but the initial sound that I hear makes me sound. Some sound good in both directions ( left too right). 
espically if there on the deep side they sound good in both directions. 
once again I don’t have a ton of time with the machine. Time will help but was looking for ways to tell that it a cap

I am using beach general. Do you guys think that’s why  I mostly hunt the beach

the ferrous limits are also up high not stock  

I can’t believe none of you are having this issue  

Are the bottle caps completely being nulled for everyone 

Is the only way to eliminate rusty bottle cap is to increase the ferrous limit. 
anyone have any tips they use. 

Maybe they take apart a deus and see how they built there’s 

have not heard anything about there leaking

Thanks everyone, if it to much of a issue I will just use the trusty Excalibur and use manticore on wet sand. I will try and practice with all your recommendations 

Salt water

Anyone have settings they want to share. 
I feel mine is falsing a lot and can’t tell if it’s a deep target or it’s a false target. 
 

How are you liking the machine for coin hunting. 
any pattern your using you would like too share

How sensitive is the falsing. What I mean is if a few drops of water hit the connector will it false. 
my excal sounds off when I take the coil out of the water. 
I have not submerged my manticore yet(waiting for Tony headphones). 
But that too me is BS if your wading in the water and it’s not perfect calm and a little bit waves and hits the machine it will false. 
Minelab should address this if it’s common. 
Don’t know if this would help. Try coax seal see if that helps was recommended too me for the AQ it didn’t help. But that another story

What happens if you were to notch it out. An then stop swing the object for a few seconds. Try a test after you paused a few seconds 

Thanks everyone 

A single hunt. How much time do you devote checking a new spot. 
An old spot that hasn’t produced anything in a long time how much time 

Weather it’s a new site your trying for the first time. 
Or it’s a site that you got stuff in the past and it’s slim pickings 

Is there a certain procedure too connecting these headphones. Do you have to noise cancel or something. 
I press the button on the machine and then the headphones. Blue light flashing. Am I doing something wrong

Not sure if I am doing it right. 
But when adjusting the ferrous volume and pitch. I don’t here any difference with iron ( waving it under the coil). Is there more to just increase or decrease the numbers

Thanks guys 

Are you planning on making a video to show on how it works

I am using the shock beach program ( all of them). 
senistivity at 22 ( can’t go higher). 
iron bias 3-5. 
I am getting a lot of iron. 
personally I can’t tell if it’s a good target unless it’s a surface. But when I go say past 4 in the iron sounds good. I have the all metal off 
should I raise the ferrous limits and discriminate more. 
Does anyone care to share there program or offer and suggestions. I would appreciate it 

 

Thanks everyone for replying 

Can you folks tell me which brand shovel you are using. 
I want something good that not going to break easy

Basically what the title said. Would also like to be able to put a another lower rod with coil inside. 
anyon have any recommendations what type of backpack I could but. 
not sure if the deus 280 would be big enough for the 17 in coil

Is there a way to activate that red cursor I see on some u tubers manticore video 
 

I was wondering with magnetic charging port is there anyway of protecting it from the saltwater corrosion.