Kaolin washer

ya its a good machine, Glad to hear that

so big it fell off the finger, ( the bigger and heavier the ring the better it falls off)

was using the XP- ORX in coin deep 10.5khz 64 gain, 2.5 sweep speed disc set at 5.5----- and using the 9 inch x - 35 coal Got out for a few swings today and found a nice 925 earing , and one Gold plated one.  clad was few but I made par - Par is 1.00in clad so i just made it and dug alot of junk  looking for those elusive Gold rings- but ta the exercise was good .

Ohh man thats a nice one

I use a humble ORX and an x-35 9" coil and hunt in one frequency at a time and this year i have found  6 gold rings, and one nice gold pendant,  and numerous silver items, Hear is the deal  if you hunt an old house site or farm field, you will get an advantige with the deus 2,  but if you use a run of the mill machine you will not come home empty 

No EMI in this spot but i like that 70 gain ,it still gets deep but less sensitive to trash foils

Ya they can have the quarters, I want the gold , the ring is worth at least 200 quarters, and i only had to dig a few tabs to get it

It says inside under the heart and crown IRELAND ,  and another mark inside the thin band but i cant read it

thats a very good video , glad you made it

ya I would take it that way to

I liked the Tarsacci, the way it could reject foil , I sold it cuz i had to pay my car insurance  and i never got to a beach . And i was hunting tot lots where my ORX excelled

Hopefully they fixed the leaking problems, it may be a good water detector , and that 50% more power to the coil under water would not be afected by EMI so I bet its a deep water machine, but using a fast recovery under water when you cant swing the thing fast under water is a problem I would use a slower sweep speed if using it in water

I showed starting out at 7 disc how a in ground live target was not heard until i put the disc back and i had not gone over this using this setting and was getting no new targets untill i did 3 things .  1, up the frequincy from 8.4 to 17.2 , No2, increase the reactivity past 2 . and No,3 dile back the disc from 7 to 5.5 and this spot came alive again.

ys i see an out going wave would lift it up , unless you faced along the lenght of the shore

A round shaft creates turbulence and drag when swinging thru water , this tires out the detectorist, but the answer swims buy him in the water , coils with openings and 90 degree angles create more turbulence under water this creates more resistance . so shy not make the shaft like a sharks tail feathering to a sharp point so you can swing the shaft and coil thru the water with ease from left to right , and the coil should be like a stingray , no openings but feathered out on the edge, hope you can understand my crude drawing , it would help that shaft and coil just glide thru the water

Ice cream eaten  every day is loathed, but ice cream one day a week is a treat

and by the way I am using the XP ORX in the FINEGOLD program but with my settings of 17.2 khz, 80 gain, 2.5 recovery speed, 2 IAR, and i can tell even when i have a bread tie under the coil , or a bottle cap I like to dig alot of Iron on purpose, to clean things up and maybe see if somthing is masked, only when i run out of energy do i get pickey and just dig the 95- or 92 and so on

what KHz, thats great i find a lot of detectorists leave the nickles

Tex, yes to limit depth and get better modulation, now in real trashy spots i lower the gain to 64 but like at 70 the quarters 8" deep give a nice wisper

like i say i wanted to get the deus 2 but am way to broke, so that forced me to use the ORX . but i am not disapointed, I can only say the more time i give this ORX the more i like it , in fact i want to buy another one  its just a great machine