Jump to content

Rick N. MI

Full Member
  • Posts

    1,611
  • Joined

  • Last visited

 Content Type 

Forums

Detector Prospector Home

Detector Database

Downloads

Posts posted by Rick N. MI

  1. I put the white gold earring in a plastic container about 3/4" high and layed on the ground . With the Gold Kruzer in deep mode it would get a hit with a short sweep back and forth but with a normal fast or slow sweep you won't hear it.

    I guess the only detector that can get that small white gold earring is the Gold Bug 2. According to Tom Dankoski it is the best micro gold hunter.

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

  2. Just did some more air tests on the 10k white gold earring and with the Gold Kruzer in deep mode with disc at 0, it hits the earring with a smooth hit with the coil raised 2"+.

    Turn disc up to 22 barely gets a hit one way.

    Micro mode didn't didn't work lowing disc to 0.

    I'll be hunting with deep mode and try disc at 0 in sand and in the water if there isn't much iron.

    Deep mode screams on shallow targets. The earring was a nice smooth hit. 

    Sensitivity was 92.

  3. Has anyone used this coil? I'm thinking about trying it in the water and I hip mount the box so it might work ok. It's said to weight 503 grams which is light for a big coil. There should be a good depth increase over the 9.5x5 dd coil on gold rings.

    Or even hip mounted would be to hard to swing in the water.

    9C6578D4-61A0-4774-A0DA-1DB17F9021C7.jpeg
    Nokta/Makro 13” x 15.5” GK40 DD coil for Gold Kruzer

  4. I got another Gold Kruzer to lake hunt. Still cold and snow in northern MI. 

    The first Gold Kruzer I had I used disc at 6 and set tone break at 22. In Micro mode it was noisy but worked ok. I thought it was just a noisy mode. I was playing with it in the house and with disc raised to 22 the Gold Kruzer ran quiet in Micro mode. Why is that?

    With disc 0 and tone break 22 very noisy. With disc raised to 22 quiet. Will it go deeper and separate better with disc at 0-6. Or no difference except noise or no noise. Haven't tested it yet.

    I'll probably run disc at 22 and set tone break at 44. Low tone for small gold and high tone for bigger gold.

×
×
  • Create New...