CTidwell

A couple things. 1) The OP wasn't asking for people to listen to for advice or anything else. 2) I didn't say it was someone you should listen to for advice or anything else. He has an entertaining channel where he does a lot of beach hunting (which WAS the OP issue). He may not wade out into the water, no, but he does go into wet sand at times.

This guy does a lot of beach hunts in Cali with his Legend. Finds a lot of stuff too. Highly recommend his channel.

Aren't high freq's usually better for gold than low?

OK so I've seen a number of people using either the Simplex or Legend mention that they never run full sensitivity even though lack of EMI chatter would allow it. Is there a good reason for this? If you are able to run the Legend at 30, why purposely lower it to 26 or 28? I've never heard anyone explain the why... Max Sens = Max depth, no?

Thanks so much. Now I will have to look into how to use/access the GI indicator! 😉 With my Legend, so far the ground around here GB at 8 or 9 pretty consistently. But there are 2 active volcanoes really close that regularly spew fine ash. Thought the ground would be pretty mineralized, but with the 9 was kinda surprised. Thanks again for the explanation.

So I have a question about Ground Balance numbers What do they mean? I remember seeing people say when beach detecting to have manual GB on zero. So does that mean that the hotter the ground the lower GB value you need? When performing an auto GB, you pump the coil til the number (and sound) stabilize, right? So if I'm getting an auto GB value of say 9 on dirt, does that mean it's hot soil?

An experienced detectorist in one of my FB groups just posted he had a great beach hunt recently, and surprisingly (to me) he wasn't using Beach mode! I'm assuming he was using this on dry, not wet sand, but I don't know that. Said he was getting targets 10-12" deep. Another member echoed the claim. He said his settings were: Recovery speed 4, Sensitivity 28, GB 0, Field Mode, M1. Wishing you massivve luck!

Saw a YouTube vid with Nokta about the new pinpointer, the Accupoint, stating it is due to start testing in a couple weeks. Also said it does have discrimination, but (very sadly) is NOT Pulse Induction. Dashed my hopes. VLF don't do as well...missed opportunity in my opinion to make yet another version of a VLF pinpointer.

I just got mine about 4 hours ago, so I'm faaaar from an expert, but I believe in the tones section (where you choose how many tones, tone freq, etc), you can change the volume for each tone break. Your iron tone should be the tone break on the far left. Check to see what the volume is there.

I remember seeing somewhere (on this site??) something about early models having an issue with the spring in the end cap being set too deep, causing poor connection with the battery and making it act wonky. They said they shimmied it with some aluminum foil under the spring to raise it up a bit and that seemed to solve the issue... Maybe I'll give that a try.

I've had it for a long time. The first batch to be released (early 2018 if I remember correctly). So unfortunately it's long out of warranty. Shipping would be pretty bad. That is the main reason I've decided to purchase a new detector to replace my Eurotek Pro. Membrane buttons on it don't work (it's even more out of warranty than my Tek-Point...hahaha)

I have a Tek-Point (same machine as F Puse, I know), and lately it has started acting weird. It will sometimes advance through 2 or even 3 steps of alarm/sensitivity with only one button push. For example, i want to go from beep 2 to beep 3, but even though I only push the button 1 time, it advances 3 steps! Other times, when I hold the button to change alarm/sensitivity, it just vibrates nonstop (no beeping) and won't do anything until I release the button (at which time it turns off). Any help would be greatly appreciated as I absolutely LOVE my Tek Point. Bought it as soon as it was released. It's not low batteries, as I've changed them out to no effect.

I get some jewelry and a lot of modern coins at parks, but I've had some luck at basically forgotten castle and shrine sites and ancient roads. My oldest coin so far is from the Muromachi period (1336-1573). They didn't start putting dates on minted coins until the Meiji period (late 1800s), so there's no way to tell exactly how old it is. Have a number of musketballs, and at the local park even found a Snyder 3 ringer bullet. Would have been from the Satsuma Rebellion in 1877 (if you've seen the movie The Last Samurai, it's more or less a Hollywood version of that event). Turns out there was a small skirmish where the park is now about 300 meters from my house! I'm not in the military, so I don't have a military PO box. Would make things easier if I did though...hehehe

He won't ship to Japan so I'm outta luck...

Any word on if it's going to be PI or VLF?

I'm going to be needing a new pinpointer soon, and was wondering what the 411 is on the new pinpointer supposedly in the works. Noticed someone mentioned a preliminary mock-up was supposed to be unveiled at an event (a couple weekends ago??), but haven't heard anything since. Thanks in advance for any info.

Or find a new hobby...hehehe Some people would complain if you hung them with a new rope.

What are the measurements on the handle? I'm waiting on my Legend to arrive... How long is the handle and control box jutting out from the shaft?