khouse

This is the exact reason Whites should have done a full recall. All dealers and distributors need to open every box and make sure the SAT goes to 8 and check for cracks. Whites does not give refunds and as soon as I get my replacement and make sure it's upgraded and works right I'll sell it at cost and move on.

Well it's been several months since my initial order of 3 MXSports. I had dropped shipped 2 of them and 1 was for me. All 3 had the initial issues as the feedback came in from my customers. They however had no issue in sending them back in for repair especially for the price I sold them for. One even had to send his back another time because the pinpoint was weak. So I just quit pushing the MXS's.. Fast forward to last Tuesday (7/5/16) I find out from my wife that she's planned a 3 day trip to the Table Rock Lake area. Well since I had sold my waterproof Compadre last fall I was desperate for another waterproof machine. So I figured I would give the MXS another shot. After all I've been a dealer since 1985 and using a machine at my cost is always a plus. I figured by now all the bugs would be smoothed out and maybe even some more software updates might have been done that no one knows about..??? So I get my shiny new machine yesterday. I get home from work and put it all together and head to my coin garden. It was no better than my 1st one! In fact it's worse because this one's pinpoint feature is weak to non existent! So I then check the SAT to see if it goes to 8 to prove it has the updated firmware - it only goes to 6!!!!!!!!!!!!! By now I'm actually pissed!!! I am so happy I didn't drop ship it to a customer. Then to make matters worse I start checking the whole machine out. I found 4 cracks in the clear face around the sealing point!! I found 2 right in the upper corners as posted by others. This is not my distributors problem. This is Sweet Homes problem!! I emailed my distributor and said I wanted a brand new machine but not before they check for cracks, pinpoint issues and the SAT that goes to 8. I am not sending this POS machine back to Sweet Home and wait a month or better to get a used machine back!! So for all you buying a new machine have your dealer or distributor take it out of the box and check it. This is going to save you a ton of headaches.

That is a beautiful ring!! I would be proud to have found it! Way to go!!!!

The Compadre at $160 will find super tiny non ferrous targets your pinpointer has a hard time finding or even not at all. It hits thin gold chains no problem. I recently sold my waterproof Compadre to help pay for the new water machine just released. That was a mistake..................................................................................................................................................................................

I contacted every person I sold a MXSport to. I told them that Whites is upgrading the firmware free of charge for some issues that's came up. Some already were in the process and others didn't know. I told them to send it back even if they felt it was running good. Some users may not even know their engine has a miss in it from time to time. If you don't know what you're missing then you're not missing anything. But these same users "can" be missing good targets without even knowing it. So why not upgrade? It's a win win for the customer. I would also suggest that if in the future there are free upgrades for any make or model you should take advantage. It's no different than us buying some software program then later the company comes out with some patches that can make your program run more stable or not lock up. So everyone get your free upgrade on your MXS.

Most of the time on any machine reducing the sensitivity to just zero in on that target will settle the numbers and tones down.

I guess I'm lucky because my ground was reading 40 to 45.

My demo model is gone. I asked a couple of my customers to weight the machine to confirm my findings of last week. I'm sure it weighed what I said but wish I could confirm the exact weight right now. I am absolutely positive it was way over 4 pounds with batteries. I recall weighing my etrac and it was definitely heavier. It was pretty balanced but nose heavy with the stock coil on.

MXS with batteries is 4lbs 6.6 oz. 8-AA batteries weight 6.6oz. just looking at the machine it looks lean. I know the beefed up handle is thick but still don't see it? It is built like a tank for sure.

Did you see I posted the info you wanted?

In regards to the "being 1 pound lighter".. It's possible that if you don't weight the batteries the mxs is right at 4 pounds. Then if you stick the 950 coil on it you would be down to around 3lbs 12 oz. Then using complicated math you would end up with the equation 4 - 3.75 ="s 1 pound. I don't know that anyone builds a coil that weight 4 ounces?

I have used the 950 coils underwater and they float like a 6 man river raft. I have had the 950 coils open and there is a lot of white foam and dead air space that a small child could survive for some time. What happened to that flat 950 coil they had way back when? Bring it back! I would only suggest to use the accessory coils on land. We know the 10 inch DD sinks and that's what you need in the water.

I have a stock mxs coil and 950 sport coil. 10 inch stock mxs coil with cover - 18.6 oz 950 Sport coil w/o cover 14,6 oz Compare to a 11 inch stock etrac coil with cover - 17 oz All coils weighed without cables Total weight of mxs with stock coil and batteries is 4lbs 6oz Total weight of etrac with stock coil and std battery 4lbs 2,5oz Total weight of etrac with stock coil and RNB battery 4lbs

Makes me feel better I'm not the only one out of the loop. Thanks for sharing!

Being a Whites dealer I have found out about new products not from the factory but from forums. I really can't think of one time Whites gave me a heads up on new product. Has this happened to any other dealer or is it just me? I remember a call to see if I had the new TRX in stock? I told the guy I didn't know what he was talking about? Kind of made me look like more of an idiot I already am.

I do love my notch discrimination. But it was fun to grab the Compadre and just do some simple coin and jewelry hunting without thumbing the disc knob. But there's a limit to how long I can hunt this way. Usually about 2 hours. But it certainly opens your eyes.....

How easy and cheap would that have been from the factory? I bought some safety shoes 2 weeks ago. My employer pays for $100 of the cost. I still had to pay another $60 to get the Keen brand. Then the sales guy said "you'll need these $25 pair of insoles to make the shoes comfortable" I said for $160 that should already be built in! More and more we seem to get less and less. Not just detectors but everything......

I agree. I haven't made the headphone connector I talked about either. I was just giving options.

You can take the headphone whip that comes in the box and make your own headphone set up like the Atpros. The Atpro phones are not waterproof but the connector is. You just shouldn't submerge the phones. So anyway you would take the mxs whip and seal it to an existing headphone plug with silicone. You could slip a tube over the connector and fill it from both sides with silicone caulking. Use Type 1 not type 2 silicone. Or possibly the best way would be to use silicone tape. Just tightly wrap that tape around the connector to waterproof it. Then screw the whip into the mxs and everything but the phones will be waterproof. Just an idea to throw out there........................

Sounds like a great linear modulated response.

First off the machine is constructed better. Fit and finish is top notch. The display of course is way better. The only program we ran was coin and jewelry and it was on par with the Atpro. Today I messed with the relic mode on my coin garden and like some others have said it's hotter. I can confirm this. Just like the MXT owners using the relic mode for coinshooting the MXS excels here as well. I was set at hyperstat and discriminated out foil and tabs set to 8 tones, modulation off. I was able to run sens at 9 to Boost. Worked great! Deep with accurate ID. I think some have given up on the MXS without really trying all the modes tweaked to their style of hunting. As more and more users post their setting we will have more to work with. Unlike the Atpro the MXS has a lot of options for all to adjust the way they like.

We simply raised the coil in the MXS video and called all caps when we did. Sometimes we forgot and dug them.

I'm hoping the relic mode will be the Cat's Meow in the trash...

It appeared he was waving the ring at around 12 inches too? The sensitivity looked like it had 2 or more bars to hit max. Plus at max it will be in boost mode. It may prove to have decent depth?

I finally got to hear the 2 tone relic mode. It looks good and deep too!