Trouble With Mi6 Pinpointer

[martygene]

i went to pair the MI6 with the D2 but the probe was dead. I charged it until the light was slowly blinking. Now when I turn it on the light stays on and it won't vibrate or sound. I have been using it as a stand alone. any ideas? 

[Chase Goldman]

Sounds like it is in mode 7 (ready to be paired with Detector).  Does it turn off?  Did you try just pairing it to the detector?  Here's a link to the online MI6 manual so you can see how to switch it back into standalone mode to see if it is working properly.

https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.xpmetaldetectorsamericas.com/local/Xpmda/Frontend/assets/docs/MI-6_Manual.pdf&ved=2ahUKEwjctOjTkbP2AhWict8KHRldDPsQFnoECAgQAQ&usg=AOvVaw1V8Qz0eDd_2ZYp5P_4Juv0

[martygene]

I at least made some progress. I have it working again as a stand alone. can't get it to pair. When I hold the button down while it is off to get to the 8 seconds pairing mode it vibrates at 5 seconds as if it is entering programing mode but that's it. If I continue to hold the button down nothing happens. thanks for the help though.

[Gary XP]

Sorry to hear you are having problems.

When you turn the MI-6 on, keep the button held down until you hear a chime....then press the button 7 times to access the Deus connect mode.

When pressing the buttons you can hear the tones raising, they are on a carousel so if you go to far keep going.

It sometimes helps to pair in your garden or outside the house as heavy EMI may cause problems.

Good luck I hope you can solve it.