RickUK Posted April 18 Share Posted April 18 Would like some words of wisdom from folks who have tried and used the Minelab 10x5 DD coil on a GPX in my case specifically the 4500 and also for coin and small artefact hunting,i will clarify this setup will never be used for nugget hunting and i am looking at using it on a very prolific roman trading villa sites which has produced 1000s of roman coins. The ground conditions are very every high mineral content,so hence why i am using the GPX but also because mist of the smaller roman coinage on the surface and top 4-5 inches have been snagged all ready,so looking to go slightly deeper and find some more. I have a brand new Coiltek 6'' Mono but looking for a DD coil to use the iron rejection,some words of wisdom regarding the Minelab 10x5 DD would be most welcome. Many thanks Link to comment Share on other sites More sharing options...
RONS DETECTORS MINELAB Posted April 18 Share Posted April 18 I have been playing around with the 10x5” DD Commander coil and it seems to have 2 to 3” inches lost in depth versus a 10x5” Coiltek mono on an under four gram target. This was using normal timings with the DD and Fine Gold with the mono. I have only done a little testing of it so will need to try some other settings. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now