Legend Not Sounding On A Metal Screw

[Joe L]

To any of you newbies to the Legend are wondering why its not toning Iron in all Metal,  like I was, with the help of the great folks here, I figured out that iron tone is set way low in V1.07.  I went in and adjusted the volume for segments 1-10 and saved it and now all is well.  Went out to my Test yard and again am very happy with the Legend.  

Joe

PS,  Iron in Park, Volume is only 2, in field and beach its only set to 1. I bumped to 8

[DSMITH]

the volumes of each tone break is the very first thing I changed in my Legend and the pitches i did not set them quite as high as you did because I do not want a bad target to scream dig me but I do want to hear what I am going over 

I run in 4 tone so I set it up 2 in the first break 4 in the second 6 or 7 in the third and 10 in the fourth, you can also adjust these further in another setting it is all in the manual

the threshold for instance is off in park, field and beach gold mod is the only mode that the threshold is on when you first boot it up

in gold mode the threshold is set at 12 and the threshold pitch is set to 13 when I adjusted those two setting in park and field to be the same as the gold mode it was much better the threshold pitch to me acts as a sort of volume for the threshold even though I do not think it is a volume adjustment of sorts it just acts as one