mark Posted June 21, 2023 Share Posted June 21, 2023 Hi as any one else had issues with the Deaus 2 after updating the firmware, mine doesn’t show any other audio except square tone, any help would be appreciated thanks Mark Link to comment Share on other sites More sharing options...
Chase Goldman Posted June 21, 2023 Share Posted June 21, 2023 Try power cycling a couple times. This was reported by some users on ver 1.0, thought it was addressed by version 1.1 but maybe not. Link to comment Share on other sites More sharing options...
mark Posted June 21, 2023 Author Share Posted June 21, 2023 Yes it is 1.1 what do you mean by recycle? Is this a power off and back on a couple of times? Many thanks Mark Link to comment Share on other sites More sharing options...
Chase Goldman Posted June 21, 2023 Share Posted June 21, 2023 Yes. Try that. Link to comment Share on other sites More sharing options...
mark Posted June 21, 2023 Author Share Posted June 21, 2023 Thanks I’ll give it a go Link to comment Share on other sites More sharing options...
Chase Goldman Posted June 21, 2023 Share Posted June 21, 2023 Let us know how it goes. If that doesn't work, try reverting to an earlier version (e.g. 0.71) and then reinstalling 1.1. Link to comment Share on other sites More sharing options...
Gary XP Posted June 22, 2023 Share Posted June 22, 2023 Hi Mark I find this one very strange as I have never heard of it before. Try updating again, remember to update your headphones at the same time. If you still find the same issue, please send a short video into XP customer service. Link to comment Share on other sites More sharing options...
mark Posted June 22, 2023 Author Share Posted June 22, 2023 I was out in the field detecting yesterday, the update is showing everything was updated correctly including the headphones but when the machine is turned off on a couple of times during the day, instead of using high square tone which is my preference all it shows is square tone and nothing else? I’ve put the update on many times now so it’s definitely messing the control up some how, I don’t know if it’s the firmware that’s causing it or if it needs flashing maybe but it’s definitely a strange issue to sort out any help would be appreciated thanks Mark Link to comment Share on other sites More sharing options...
Chase Goldman Posted June 22, 2023 Share Posted June 22, 2023 1 hour ago, mark said: I was out in the field detecting yesterday, the update is showing everything was updated correctly including the headphones but when the machine is turned off on a couple of times during the day, instead of using high square tone which is my preference all it shows is square tone and nothing else? I’ve put the update on many times now so it’s definitely messing the control up some how, I don’t know if it’s the firmware that’s causing it or if it needs flashing maybe but it’s definitely a strange issue to sort out any help would be appreciated thanks Mark Thanks for reporting back. You should now do as Gary Black from XP recommended and send a short video to XP customer service. Long shot - There may be a hardware issue with the controller headphone/data/charge connector that is making it think you have bone phones plugged in or something. Anyway, your best bet is XP customer support at this point. Good luck and let us know how it got resolved and how your XP customer support experience went. Link to comment Share on other sites More sharing options...
mark Posted June 22, 2023 Author Share Posted June 22, 2023 Ok many thanks will keep you posted Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now