MCH2 Posted May 19, 2018 Share Posted May 19, 2018 Has anyone tried the Ausdom AH3 Apt-x low latency head phones. I just got them for my Equinox 600 and they paired right up with low latency. I then took them to a fairground that I have partially searched. My coin count was way down while using them. I will check them in my coin garden tomorrow. Just wondering if anyone else has tried them and their opinion. Malcolm Link to comment Share on other sites More sharing options...
MCH2 Posted May 19, 2018 Author Share Posted May 19, 2018 Update. Went out in the backyard bored a 5" hole and put in a clad Kennedy half dollar. Did a factory reset on my Equinox 600, all charged up, park-1 mode, no head phones, volume up, connections double checked, soil mild, ground balance, noise cancellation. No signal on a 5" deep clad Kennedy half dollar from any direction w/o headphones or with them. Equinox pinpoint works great. Seems something has gone wrong. Any suggestions to check before I send it back? It may be my chance to upgrade to the 800 from my current 600. Malcolm Link to comment Share on other sites More sharing options...
Steve Herschbach Posted May 19, 2018 Share Posted May 19, 2018 Does the detector get signals on targets in air tests? There are reasons why a freshly buried half might not be detected. Can't help with the headphone question since I have never tried those. Link to comment Share on other sites More sharing options...
MCH2 Posted May 19, 2018 Author Share Posted May 19, 2018 I went outside for my air test and away from all metal and EMI as I could and propped up a 3' tall cardboard box without any bar codes or magnetic strips of any kind and here are the results: clad Kennedy half @ 4" TID bouncing all over from 11-31, worse @ 5" & nothing at 6" silver quarter @ 4" bouncing from 13-29, worse @ 5" and nothing @ 6" common Jefferson nickel @ 4" a steady 14 on TID @ 5" becoming unstable mercury dime @ 4" bouncing from 14-25, @ 5" next to nothing copper memorial penny @ 4" steady 25 TID, @ 5" 15-21 TID, @ 6" nothing circular beaver-tail pull tab @ 4" steady 15-16, @ 5" 14-15, @ 6" next to nothing A few days ago, when things were working well, I dug a clad quarter @ 10". Thanks for the help. Malcolm Link to comment Share on other sites More sharing options...
Dan(NM) Posted May 19, 2018 Share Posted May 19, 2018 13 minutes ago, MCH2 said: I went outside for my air test and away from all metal and EMI as I could and propped up a 4' tall cardboard box without any bar codes or magnetic strips of any kind and here are the results: clad Kennedy half @ 4" TID bouncing all over from 11-31, worse @ 5" & nothing at 6" silver quarter @ 4" bouncing from 13-29, worse @ 5" and nothing @ 6" common Jefferson nickel @ 4" a steady 14 on TID @ 5" becoming unstable mercury dime @ 4" bouncing from 14-25, @ 5" next to nothing copper memorial penny @ 4" steady 25 TID, @ 5" 15-21 TID, @ 6" nothing circular beaver-tail pull tab @ 4" steady 15-16, @ 5" 14-15, @ 6" next to nothing A few days ago, when things were working well, I dug a clad quarter @ 10". Thanks for the help. Malcolm What are your settings? Link to comment Share on other sites More sharing options...
MCH2 Posted May 19, 2018 Author Share Posted May 19, 2018 I did another factory reset and used park-1 with GB and noise cancellation. All I have used so far in all my hunts is park-1 Link to comment Share on other sites More sharing options...
Dan(NM) Posted May 20, 2018 Share Posted May 20, 2018 My first guess would be a bad coil, you might call Minelab first thing Monday morning and explain what's going on. That's a real bummer!! Link to comment Share on other sites More sharing options...
MCH2 Posted May 20, 2018 Author Share Posted May 20, 2018 Thanks for the input Dan. The unit does the same in all modes; no depth and unstable. I don't know if pairing it with wireless headphones has anything to do with it, but it hasn't worked right since being paired. I'll call Minelab and see what they think. Link to comment Share on other sites More sharing options...
Crown-star Posted November 26, 2019 Share Posted November 26, 2019 Hey, I am just curious, what's the ending of this story? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now