Steve Herschbach Posted September 14, 2015 Share Posted September 14, 2015 First off I want to say I am not advocating anyone do this. It will void your warranty. But I like to know stuff and this is interesting information. Ismael has opened up an SDC and confirmed that the coil is plugged into the control box with a plug connector. He has used an adapter to run some other Minelab coils and in his opinion mono coils seem to work well. http://golddetecting.4umer.net/t22372-coil-question-for-the-sdc-2300#216360 Further down in the same thread there is a picture of the connection, which is under the cover on the housing where the rod assembly pivots. http://golddetecting.4umer.net/t22372-coil-question-for-the-sdc-2300#217008 I hope someday Minelab stuffs the SDC into a standard detector housing, something like the Eureka Gold. And offers a couple other coils. A small 4" x 6" elliptical would be awesome for crevicing and an 8" x 12" elliptical would be great for better ground coverage. A standard control box should lower the price considerably and an ability to hip or chest mount would be really great. I would get one in a heartbeat. 4 Link to comment Share on other sites More sharing options...
Tortuga Posted September 14, 2015 Share Posted September 14, 2015 That's some really interesting info. Seems like Coiltec or NF could sell alternate coils for the SDC if they came with detailed instructions with pictures on how to install them and a little star head tool or whatever is needed to open the case. Naturally big bold letters would have to be printed on the first page of the instructions saying installing a new coil voids your warranty. Link to comment Share on other sites More sharing options...
spencer@wy Posted September 16, 2015 Share Posted September 16, 2015 Steve, am i correct in understanding both sdc and f3 utilize the mps tech? After looking thru service manual for my f3 i think this is something i might attempt with it. It does appear to have regular screww type coil connector inside handle. I only have an 11" mono &18" mono of my own to test but access also a 12*15 commander. dont suppose you can point me to some tech info on coils(principals, test procedure for measuring values,etc.) so i could attempt to test these first before i just start slappin sh** together? Btw, have you finished your custom atx yet? 1 Link to comment Share on other sites More sharing options...
Steve Herschbach Posted September 16, 2015 Author Share Posted September 16, 2015 F3 is MPS Bipolar and SDC 2300 is MPF. You are on your own there buddy! I am not a techie so all I can suggest is you contact Ismael at the link above. I really need to get that ATX off the work bench. Just got busy and it got set aside. Might be winter though before it happens. 1 Link to comment Share on other sites More sharing options...
LukeOzDigger Posted September 22, 2015 Share Posted September 22, 2015 I too would do back flips for a land only version of the SDC especially with coil options. I don't see why they couldn't replace the eureka gold with a base model SDC 2300 well it wouldn't be a SDC, but no reason it couldn't use the same case. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now