Dances With Doves Posted June 25, 2020 Share Posted June 25, 2020 True, We also don't have to deal with salt water or sharks even though there is folklore about a kid getting attacked in 1955 in Lake Michigan at Chicago.The Great lakes also has a sieche where one part of the lake can be 10 feet higher then other side.These conditions can create very strong currents in certain places. Sometimes after a storm the coins and gold lay in plain site on the black sand where you just eyeball them.The 18k chain in my test today was such a target.We also don't have ocean type tides every day. 2 Link to comment Share on other sites More sharing options...
Dances With Doves Posted June 25, 2020 Share Posted June 25, 2020 If I am hunting in Lake Ontario and I get about 15 nickles I usually have some gold.So I say you got robbed Steve.And hunting a lake when it is low is a joy.We hunted a lake that was 3feet lower and it made hunting easier and more efficient plus we could go out deeper then before. One time it was dead calm and that was pure joy.Gold, silver coins,silver jewelry, plenty of clad and some relics.This was a finger lake.When it comes to the Great lakes and ocean I think OBN and Clive have hunted both for members here and they could comment on hunting these.Andy Sabich hunted a large lake called Onieda by Syracuse and that was his first honey hole.He and his friends got 1000's of gold here I heard.I hunted here and got 2 gold in 3 times hunting this fine white sand on the west end of that lake.I would like to try Nox and AQ type pulse here because some of the stuff can be deep. It is a easy 100 mile drive mostly down the thruway.That west end of that shallow lake can get some good size waves. 3 Link to comment Share on other sites More sharing options...
vive equinox Posted June 25, 2020 Share Posted June 25, 2020 Steve , I do not know how it is on your beaches, but on mine the proportion of round pulltab (the old ones) is maybe 5 or 10% compared to the pulltab in 8 (modern with two holes). can we assume that you discriminate many who had a double beep signal? since we only see 5 on your photo and many more of the others. 1 Link to comment Share on other sites More sharing options...
Steve Herschbach Posted June 25, 2020 Author Share Posted June 25, 2020 1 hour ago, vive equinox said: can we assume that you discriminate many who had a double beep signal? since we only see 5 on your photo and many more of the others. I did not dig any double beep signals. I would not say I analyzed everything perfectly from every angle, but was only digging targets that appeared to give a clean, single signal. In the denser target areas that was not quite that simple though as the “good” signal was right in the middle of several “not good” signals, so I was picking what sounded like something good out of the middle of a mess. In a couple, cases I got more than one target out of the same dig hole. Link to comment Share on other sites More sharing options...
vive equinox Posted June 25, 2020 Share Posted June 25, 2020 Okay so , would you say that the 8 double hole pulltab has a double beep sound with the AQ? even in all metal ? Link to comment Share on other sites More sharing options...
Steve Herschbach Posted June 25, 2020 Author Share Posted June 25, 2020 I don’t know how to say any more than I have that I was not intentionally digging anything that I perceived as making a double beep sound. I was not using all metal, I was using tones mode. So no, I would not say the double hole pull tabs made a double beep sound. If they had, I would not have dug them. 2 Link to comment Share on other sites More sharing options...
vive equinox Posted June 25, 2020 Share Posted June 25, 2020 33 minutes ago, Steve Herschbach said: Je ne sais pas plus que moi dire que je ne creusais pas intentionnellement quelque chose que je percevais comme émettant un double bip. Je n'utilisais pas tout le métal, j'utilisais le mode Tones. Donc non, je ne dirais pas que les languettes de traction à double trou émettaient un double bip. S'ils l'avaient fait, je ne les aurais pas creusés. well I understood that Alexandre said that these pulltab sound double beep ?. more by seeing your ratio pulltab round beaver tail and pulltab 8, I believed it. In Europe round pulltab are rare now. maybe you or another AQ owner can just try out several AQ settings on these pulltabs to see what we can do? thanks Link to comment Share on other sites More sharing options...
Steve Herschbach Posted June 25, 2020 Author Share Posted June 25, 2020 All I can do is report real world results. I am not unhappy with the result and I am not going to try and be that aggressive trying to reject targets. I’d rather be more conservative than overly aggressive in that regard. I think you are discounting the effects of orientation in the ground being such that not everything signals as if it is laying flat on the surface. Not all targets give perfect textbook example signals when buried in the ground. The hair pins I dug did not give a double blip due to their orientation and depth. I would expect no different from tabs. As far as the ratio, I was digging what I believe to be deeper, older targets. Only one nickel is a clean, recent drop. VLF operators have probably skimmed off the shallower, more recent items to some degree. I would caution against reading too much into any one single report by any one person. It takes time and many reports from many people under a wide range of conditions for a fuller picture to develop. 9 Link to comment Share on other sites More sharing options...
midalake Posted June 25, 2020 Share Posted June 25, 2020 12 hours ago, Steve Herschbach said: Now let's give up a little depth, and use the AQ tones mode with default ATS and Reject settings. I prefer tones because a lot of ferrous will make both high and low tones, and mute lets the high tone through, and fakes me out. Tones will be better on at least some bottle caps at giving a high tone with a low tone edge to it. Lots of ferrous will give solid low tones. If you hate digging coins in the surf, dimes and quarters and clean zinc pennies will give a clean low tone. So will silver rings unfortunately. Hi Steve How is it even possible to reject silver [giving a low tone] and still detect gold [with high tone]? With tones modes? If you don't know maybe someone else? Seems impossible. Thanks Dave Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now