ksrick Posted February 8, 2023 Share Posted February 8, 2023 What is the difference if 1st tone break is 0 to 11, tone volume 1 or 2 and pitch low in using mode c or mode g? Also to me it would have made more sense if you save a user profile , and wanted to tweak it a little for a certain area it would stay in the original profile, unless you wanted to save it. Seems that would make it easier , unless I'm missing something. Link to comment Share on other sites More sharing options...
JCR Posted February 8, 2023 Share Posted February 8, 2023 G only Discs out 1-2. C is customizable beyond the defaults to be what ever you want. With 4 User Profiles & the Legend's ability to save separate Tone Break, Pitch & Volume settings for each Tone number profile you have a lot of ways(20+) to "save" personalized settings. Link to comment Share on other sites More sharing options...
ksrick Posted February 8, 2023 Author Share Posted February 8, 2023 30 minutes ago, JCR said: G only Discs out 1-2. C is customizable beyond the defaults to be what ever you want. With 4 User Profiles & the Legend's ability to save separate Tone Break, Pitch & Volume settings for each Tone number profile you have a lot of ways(20+) to "save" personalized settings. In G or any that I'm aware of you set tone breaks anywhere you want. I'm not referring to stock default but rather a custom profile. Link to comment Share on other sites More sharing options...
JCR Posted February 8, 2023 Share Posted February 8, 2023 Yes, Tone break has nothing to do with the Disc profile(A, G, F or C). My point is that for each Tone # (2, 4, 6, 60 or Pitch) you can have different Tone Breaks, volumes & frequency. This is not talked about much but is a very powerful ability. This is in addition to having 4 User Profiles. Link to comment Share on other sites More sharing options...
ksrick Posted February 8, 2023 Author Share Posted February 8, 2023 27 minutes ago, JCR said: Yes, Tone break has nothing to do with the Disc profile(A, G, F or C). My point is that for each Tone # (2, 4, 6, 60 or Pitch) you can have different Tone Breaks, volumes & frequency. This is not talked about much but is a very powerful ability. This is in addition to having 4 User Profiles. That's what I'm having a hard time with because G notchs 1&2 out (my understanding) I can also set Tone beak 1 to 11 adjusting vol & pitch to really do same thing, but you will hear 1&2 instead of muting. That's the only thing I see. Link to comment Share on other sites More sharing options...
Jeff McClendon Posted February 8, 2023 Share Posted February 8, 2023 A, G, and F are quick and really easy ways to change the iron discrimination pattern. C is for setting up your own custom discrimination pattern. Sure, you can also take the long route and adjust the volume levels and do something similar by setting up a custom pattern Using A, G or F is instantaneous. Using C and setting it up like you want it will take some time and user knowledge. Even if you only use User Profile 1 and don't actually save anything, the Legend will remember your last setup and will go right to it on startup. Link to comment Share on other sites More sharing options...
Sirius Posted February 11, 2023 Share Posted February 11, 2023 I didn't know how to set the C settings until I watched this vid, could be very useful for notching out trash but you'd miss gold for the most part. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now