moiloon Posted March 12, 2023 Author Share Posted March 12, 2023 6 hours ago, Fd001 said: Hi, i have the EP650 on my Nox600, have the " + " , working very good The Headphone have Version BT 4.2 , in later models i think there was a change in the BT to 5.0 I have try BT 5.0 on my Nox600, but it would not connect.... Sorry for my poor english ? this possibly my problem with the ep650, wonder if possible to find firmware and flash them to lower revision firmware Link to comment Share on other sites More sharing options...
PUHH Posted March 12, 2023 Share Posted March 12, 2023 I have ep650 (BT 4.2) - work well on my equinox 600 1 Link to comment Share on other sites More sharing options...
moiloon Posted March 12, 2023 Author Share Posted March 12, 2023 13 hours ago, F350Platinum said: Yes they do. Even the BT 5.0 version. I have two pairs of them bought months apart. They're on-ear and have bass boost, they will give you some situational awareness and sound much better than the XP backphones. I can wear them all year. You might want to wrap the top band with something they're not uncomfortable by themselves but I used some wrap tape. Here's some more info on them: https://uk.creative.com/p/headphones-headsets/sound-blaster-jam-v2 are you using the deus though with the sound blaster jam v2? and not he nox?? Link to comment Share on other sites More sharing options...
moiloon Posted March 12, 2023 Author Share Posted March 12, 2023 5 hours ago, PUHH said: I have ep650 (BT 4.2) - work well on my equinox 600 and they show the +? why will mine just not work grrrrrrr, is there a specific process you use? as i seem to have tried every way imaginable, even last night went down to lower firmware on the nox, same, so went back up to the latest as it changed nothing regarding my issue Link to comment Share on other sites More sharing options...
Chase Goldman Posted March 12, 2023 Share Posted March 12, 2023 46 minutes ago, moiloon said: are you using the deus though with the sound blaster jam v2? and not he nox?? He uses them on the Nox too. They work fine and yes the + symbol shows up when paired. He has tried a number of different 3rd party wireless headsets with the Nox. He only recommends those he has tested and that he himself verified work in low latency mode, so heed his advice. 1 Link to comment Share on other sites More sharing options...
F350Platinum Posted March 12, 2023 Share Posted March 12, 2023 59 minutes ago, moiloon said: are you using the deus though with the sound blaster jam v2? and not he nox?? Sorry for the photo showing them with the Deus, as Chase wrote I have used them with both. I merely posted that photo to show you the wrap tape. Took the picture for another post to show they're ok with the Deus 2 as well with an Aptx-LL transmitter plugged into the backphone puck. 1 Link to comment Share on other sites More sharing options...
Chase Goldman Posted March 12, 2023 Share Posted March 12, 2023 1 hour ago, moiloon said: and they show the +? why will mine just not work grrrrrrr, is there a specific process you use? as i seem to have tried every way imaginable, even last night went down to lower firmware on the nox, same, so went back up to the latest as it changed nothing regarding my issue Do a factory reset on the Nox and if the EP650 has a reset feature, try that as well and then attempt a re-pairing. If your EP650 is now labled as BT 5.X, they may have gone to a newer chipset that deleted APTX-LL compatibility in favor of APTX Adaptive (even though BT 5.X compliant Headsets can still support the APTX-LL chipset). APTX Adaptive may be configured in firmware to either support or not support APTX-LL legacy. It's kind of a crapshoot, unfortunately. 1 Link to comment Share on other sites More sharing options...
moiloon Posted March 12, 2023 Author Share Posted March 12, 2023 csr8645 Is what my EP650 show up as in device manager if i connect via usb to pc ,how can i find out what bt version my h/phones actually are? on August website for the product they only seem to state bt 4.2. wonder if my nox is at fault here defective bt or something 1 Link to comment Share on other sites More sharing options...
Fd001 Posted March 12, 2023 Share Posted March 12, 2023 mine is CSRA64215, it's BT 4.2 https://www.datasheet4u.com/datasheet-pdf/CSR/CSRA64215/pdf.php?id=1256654 CSR8645 is only BT4.0 , CSR8645 does not support low latency https://www.datasheet4u.com/datasheet-pdf/CSR/CSR8645/pdf.php?id=806732 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now