Doc Posted August 16, 2018 Share Posted August 16, 2018 I got the first few covers from the production run of Gold Monster Covers I designed. I got a limited amount sent to me before the bulk of them will be shipped. It will take about 30 days to get the bulk of the production run, but I am really happy with the way they have turned out. The Gold Monster cover is made of a tough Green canvas with a neoprene lining to offer protection to the detector. I also designed a cord wrap, that closes with a hook and loop strip. I designed this to protect the coil cable and allow you to secure that cable without using that plastic cable pinch that has been molded into the vertical support. First it is very hard to get the coil cable in and out of that little plastic pinch, and second I am afraid over time you may damage the coil wiring. The wrap allows you to easily change the coil and not be pinch that cable all the time. This thing was a real bear to design because of all the weird angles. I think the testimony to the difficulty of the design is that I don't think anyone else has designed a cover for this machine yet. See the pictures. Doc 3 Link to comment Share on other sites More sharing options...
ophirboy Posted August 17, 2018 Share Posted August 17, 2018 This is a cover available in Australia , but the neoprene one looks very nice and covers the speaker and jack as well . The Aussie one covers the control panel and is Velcro tied at the yoke. Link to comment Share on other sites More sharing options...
Doc Posted August 17, 2018 Author Share Posted August 17, 2018 4 hours ago, ophirboy said: This is a cover available in Australia , but the neoprene one looks very nice and covers the speaker and jack as well . The Aussie one covers the control panel and is Velcro tied at the yoke. Well they got the fit looking good. I am a bit adverse to black because it absorbs too much heat. Green seems to be the color of choice next to CAMO when I polled users. Detectorists are a stealthy bunch. There are some other features I included in my design. I don't like covers that shift around. So on the side panels, on the inside I stitched a tab of "HOOK" material on each interior side. Then I supply the opposing "LOOP" tab with a peel off adhesive back so you can mount that on the edge of the detector. That way the cover locks onto the detector, via the hook and loop and prevents the cover from shifting. Doc Link to comment Share on other sites More sharing options...
Doc Posted August 17, 2018 Author Share Posted August 17, 2018 4 hours ago, phrunt said: I'd like one but I can only assume the postage cost to NZ would make it not viable. They look good. Phrunt $13 USD to ship to NZ. Doc Link to comment Share on other sites More sharing options...
Doc Posted August 17, 2018 Author Share Posted August 17, 2018 8 minutes ago, kiwijw said: Hi Doc, Looks very smart.? What is the cost of the cover please? Cheers. JW $39.95 plus S&H $5 in the U.S. Link to comment Share on other sites More sharing options...
Doc Posted August 17, 2018 Author Share Posted August 17, 2018 9 minutes ago, phrunt said: We could combine shipping John Actually it's the same price $13 for shipping 2 as it is for 1. 1 ounce through 8 ounce is $13 They weigh about 3 oz each. So combining orders would be the way to go. Doc 2 Link to comment Share on other sites More sharing options...
Mike C... Posted August 18, 2018 Share Posted August 18, 2018 Looks good Doc-Pm me if you still have one for sale l-Thanks 1 Link to comment Share on other sites More sharing options...
Doc Posted August 18, 2018 Author Share Posted August 18, 2018 I weighed the Gold Monster Covers today and they are 2 ounces each so you could ship 4 to New Zealand for $13. Doc Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now