Steve Herschbach

The White's Surfmaster PI Dual Field metal detector is the latest of the Surf PI series introduced in the mid-1990's. The Surf PI Dual was released in 2008 and was still in production when White’s closed up shop in 2020. The Surfmaster PI Dual Field is a fully submersible pulse induction (PI) metal detector aimed primarily at beach and underwater detecting. The Surf PI is submersible to 100 feet and therefore suitable for SCUBA diving. Note however that the coil and headphones are hardwired for extra waterproof integrity and are not interchangeable. "Designed for difficult beach grounds, the Surfmaster Dual Field combines turn-on-and-go ease with the extreme depth and sensitivity of pulse induction detection. PI technology yields extreme depth detection for coins and jewelry – especially in salt water and mineralized ground. This detector is surf-ready and completely waterproof to a depth of 100 feet. Its 12” dual-field search coil has near neutral buoyancy, so it won’t push away from the water or try to sink. Included Piezo headphones are also waterproof. The Surfmaster Dual Field is sensitive to gold, even at maximum depth, and makes hunting easier with gain control and variable sweep speed. The adjustable pulse delay reduces noise from black sand and junk, making targets easier to pick out." Source: White's website White's Surfmaster PI Dual Field metal detector White's Surfmaster PI Dual Field control panel PULSE INDUCTION DETECTION for extreme depth on coins and jewelry, especially in saltwater and mineralized ground COMPLETELY WATERPROOF to depth of 100 feet ADJUSTABLE PULSE DELAY reduces black sand noise. Quieter on the beach, more targets 12” DUAL FIELD spider search coil. Near-neutral buoyancy SENSITIVE TO GOLD even at maximum depths GAIN CONTROL ADJUSTS for your particular beach conditions so you get every inch of PI depth QUICK TARGET RECOVERY TUNER ADJUSTS THRESHOLD tone and checks battery VARIABLE SWEEP SPEED slow to fast with no loss of depth WATERPROOF PIEZO HEADPHONES AUTOMATIC GROUND REJECTION POWER: 8 “AA” batteries included TWO-YEAR Parts and Labor Warranty Official White's Surfmaster PI Dual Field Product Page White's Surfmaster PI Dual Field Owner's Manual White's Metal Detector Forum

The White's TDI SL metal detector was introduced in 2011 and was still in production when White’s closed up shop in 2020. It is a pulse induction (PI) metal detector aimed primarily at relics, gold prospecting, and beach detecting. "The TDI SL provide serious detectorists with affordable pulse power. Initially developed to meet the demands of gold prospectors searching for extremely small and deep nuggets, the TDI has evolved into a detector that has proven itself as an effective detector for relic hunting, beach hunting and, under the right conditions, even coin hunting. Many of the surface relics and nuggets have been found out there, leaving a layer of even more valuable treasures that other detectors couldn’t reach. That’s where the TDI’s pulse technology comes in. This is one deep-seeking unit - especially in the harsh grounds - where other detectors just can’t compete." Source: White's 2018 catalog White's TDI SL metal detector White's TDI SL control panel FULL-CONTROL GROUND BALANCE - Quickly balance out the iron mineralization of hot rocks, black sand and other tough grounds ADJUSTABLE PULSE DELAY - Settings from 10 microseconds (best for finding gold nuggets) to 25 microseconds (for relic, coin and beach hunting) VARIABLE AUDIO - Select with Ground Balance “ON”. 3-WAY TARGET CONDUCTIVITY SELECTOR - Allows variable audio to hear either only low conductive targets like most gold nuggets, or high-conductive targets like silver coins and large relics, or both. Unique ability to aid in identifying trash THRESHOLD CONTROL - Accurately adjust the audio to hear the smaller, deeper signals FREQUENCY CONTROL - Adjustable for hunting near power lines, microwave or other interference GAIN CONTROL - Maximizes sensitivity and depth BATTERY L.E.D. INDICATOR LIGHT NIMH RECHARGEABLE BATTERY PACK - Up to 6 hours of hunting. Backup “AA” pack included. WATERPROOF 12” SPIDER search coil TWO-YEAR Parts and Labor Warranty Official White's TDI SL Product Page White's TDI SL Owner's Manual White's Pulsescan TDI - Steve's Review White's Metal Detector Forum

The White's Goldmaster 24K metal detector was introduced in 2018 and was still in production when White’s closed up shop in 2020. It is a 48 kHz induction balance metal detector aimed primarily at gold prospecting. A waterproof version called the GMX Sport was released in 2020. Garrett Metal Detectors purchased White's Electronics, and the 24K bears the distinction of being the only model that Garrett continued to produce, as the Garrett Goldmaster 24K. All accessories like coils are compatible on both versions. "Featuring a 50% increase in coil voltage over previous models along with an all-new XGB ground balance system, take your prospecting to new depths with the Goldmaster 24k. This machine represents a new generation of VLF detection technology, with features that both sourdough and greenhorn prospectors can appreciate. Starting with the industry-standard 48 kHz operating frequency, we’ve packed all the necessities into one package to put you on the gold. A large, backlit display shows you all the machine’s settings as well as valuable target information. The Target Graph at the top of the display shows Ferrous, Gold, and High Conductor ranges, which is mirrored with Target ID numbers ranging from 0-99. An all-new XGB ground balance system can handle mineralized ground unlike other VLF prospecting machines." Source: Goldmaster 24K brochure White's Goldmaster 24K metal detector White's Goldmaster 24K control panel For advanced users, TracLock and Ground Grab are just a tap of button away. You can assign a ground balance offset in both TracLock or XGB modes. To help prospectors that prefer drywashing, sluicing, or panning, the Goldmaster 24k features a Ground Scan mode that can show you where valuable paystreaks are in streambeds and washes. The Goldmaster 24K offers 10 levels of adjustable sensitivity, adjustable audio volume with two levels of Boost, adjustable discrimination, vSAT, adjustable threshold, non-motion pinpoint, and a Tone ID mode. But don’t let that scare you if this is your first prospecting machine – this is a turn-on-and-go machine, with advanced features you can grow into as you gain experience. SENSITIVITY – Set the sensitivity at a level that does not result in false signals from the ground. Very strong ground may result in the symbol on screen and a loud sound – this means the sensitivity is too high. GROUND BALANCE – With the default setting, the detector will use XGB to automatically ground balance. Tap to lock the ground balance to the current setting. Tapping when the ground balance is locked will update the current ground setting to what is under the coil. GROUND SCAN – Hold to put the detector into Ground Scan mode. The top bar displays the ground strength and the two digit numbers display the ground type (phase). Useful for tracing paystreaks. IRON CANCEL – Tap to silence hot rocks, trash and mineral changes in both audio modes. Hold to select the Iron Cancel setting (1 bar is default). Note that this setting may decrease the detector’s sensitivity to very small gold, but is necessary in difficult ground conditions. VOLUME and THRESHOLD – Tap to adjust the volume with the up and down buttons. Hold to adjust the threshold with the up and down buttons (“th” displays on screen). Set these to a comfortable level for your hearing and preference. AUDIO MODE – With the displayed on screen, the detector is in “BEEP” audio mode (high tone = good target, low tone = bad target). The default setting (without on screen) is a traditional All-Metal audio mode with greater sensitivity to small targets. SAT – SAT can smooth out ground inconsistencies. Hold to adjust it (“Sa” displays on screen, 2 is the default setting). PINPOINT – Hold for non-motion pinpoint mode. In difficult ground this mode may be affected by mineralization. BACKLIGHT – Tap to enable the backlight (this reduces battery life). FREQUENCY SHIFT – Hold when turning the detector on to shift frequency (useful when there is EMI). Power off to save the selection. FACTORY RESET – Hold when turning the detector on to perform a factory reset. AUDIO - Built in speaker, 1/4” headphone jack BATTERIES - 8 AA WEIGHT - 3.5 lbs COILS - 6" x 10" DD standard. Optional 6” round concentric and 4" x 6" DD coils available White's Goldmaster 24K Owner's Manual White's Goldmaster 24K Color Flyer White's Goldmaster 24K XGB Ground Tracking Explained White's Goldmaster 24K - Steve's Review Forum threads tagged "24k gmx" White’s Metal Detector Forum

The White's Goldmaster GMT metal detector was introduced in 2000 and was still in production when White’s closed up shop in 2020. It is a 48 khz induction balance metal detector aimed primarily at gold prospecting. "THE GMT IS WHITE’S GOLDMASTER® - used in goldfields around the world! This detector ignores the harsh ground found in gold-bearing areas to simplify prospecting and find nuggets large and small - and coins, too. The GMT® is made for gold country, with 48 KHz operating frequency - the best for gold - and a waterproof search coil that’s ready for streams and rivers. High-end features like the iron target analyzer make hunting easier. Manual controls are available for advanced users and each option includes a recommended initial setting. Also onboard: variable self-adjusting threshold, Grab Pushpad for setting ground balance instantly, automatic ground balance and “Follow the Paystreak” feature, which displays the amount of magnetic minerals in the ground." Source: 2018 White's catalog White's Goldmaster GMT metal detector White's Goldmaster GMT control panel AUTO GROUND BALANCE with Fast AutoTrac® TRACKS AND ADJUSTS while you hunt GRAB PUSHPAD GROUND BALANCE sets in an instant IRON ID Bar Graph PROBABILITY OF IRON displays in percentage IRON TARGET ANALYZER determines the probability of iron as you sweep “FOLLOW-THE-PAYSTREAK” displays the amount of magnetic minerals in the ground OPTIONAL AUDIO Iron ID “Grunt” comes at the end of the GMT’s “zip-zip” sound VARIABLE SELF-ADJUSTING THRESHOLD (VSAT) WATERPROOF ELLIPTICAL “DD” search coil 48 KHZ operating frequency - Best for gold! EIGHT “AA” Drop-in Battery System 40 HRS. OF HUNTING (Optional Nicad Rechargeable System, sold separately) TWO-YEAR Parts and Labor Warranty Official White's Goldmaster 24K Product Page White's Goldmaster GMT Owner's Manual White's Goldmaster GMT - Steve's Review White's Metal Detector Forum

The White's MX7 metal detector was introduced in 2017 and was still in production when White’s closed up shop in 2020. The MX7 is a 13.9 kHz VLF metal detector aimed primarily at coin, jewelry, relic, and gold nugget detecting. "THE RIGHT DETECTOR, AT THE RIGHT PRICE! All the features and sensitivity of the MX Sport - in a detector built for land and shallow water hunting. Just like Sport users have discovered, MX7 will give you a new opportunity to hunt those spots you’ve been before and uncover a new layer of depth. Super-sensitive to small gold targets, too. Plus, the MX7 is so light and balanced at just 3.5 lbs, you’ll be able to hunt all day,and find more." Source: White's 2018 catalog White's MX7 metal detector White's MX7 control panel WATER-RESISTANT HOUSING is perfect for land and shallow water hunting SIX ADJUSTABLE HUNT PROGRAMS. Coin and Jewelry, Beach, Relic,Prospecting, High Trash and All Metal. Plus, Pinpoint FAST RECOVERY SPEED. Pick out those good targets right alongside trash REJECT VOLUME™. Maximize depth and filter target responses by the intensity of the volume- 8 settings SALT TRACK. An option in all hunt programs, Salt Track enhances performance in wet sand, in some farm fields and in the alkali patches often found in prospecting areas TONE ID. Hunt in 1, 2, 4, 8 or 20-tone I.D. AUTO GROUND BALANCE WITH TRACKING. Grab options. Complete versatility to go from the park to the beach to the desert FREQUENCY OFFSET for hunting alongside other detectors OPERATING FREQUENCY 13.9 KHZ LIGHTWEIGHT DESIGN - JUST 3.5 LBS. ADJUSTABLE 3-PIECE ROD 8 “AA” BATTERY PACK included 9.5” CONCENTRIC WATERPROOF COIL (other Sport coils are available, sold separately) 2-YEAR PARTS & LABOR WARRANTY ADJUSTABLE ARMREST with arm strap Official White's MX7 Product Page White's MX7 Owner's Manual White's Metal Detector Forum

The White's MX Sport metal detector was introduced in 2016 and was still in production when White’s closed up shop in 2020. It is a fully submersible 13.9 kHz VLF metal detector aimed primarily at coin, jewelry, relic, and gold nugget detecting. "THIS WATERPROOF METAL DETECTOR can do it all! Hunt for relics, coins and jewelry, even gold nuggets. With its roots in the MX lineup, MX Sport builds on the legendary MXT with the latest technology for improved performance, more options, and expanded features." Source: White's 2018 catalog White's MX Sport metal detector White's MX Sport control panel WATERPROOF HOUSING IP-68 certified waterproof to 10 feet SIX ADJUSTABLE HUNT PROGRAMS. Coin and Jewelry, Beach, Relic, Prospecting, High Trash and All Metal. Plus, Pinpoint FAST RECOVERY SPEED. Pick out those good targets right alongside trash REJECT VOLUME™. Maximize depth and filter target responses by the intensity of the volume- 8 settings SALT TRACK. An option in all hunt programs, Salt Track enhances performance in wet sand, in some farm fields and in the alkali patches often found in prospecting areas TONE ID. Hunt in 1, 2, 4, 8 or 20-tone I.D. AUTO GROUND BALANCE WITH TRACKING. Grab options. Complete versatility to go from the park to the beach to the desert FREQUENCY OFFSET for hunting alongside other detectors FREQUENCY 13.9 KHZ WATERPROOF SPORT HEADPHONES included 8 “AA” BATTERY PACK included ADJUSTABLE ARMREST with arm strap 10” DOUBLE D WATERPROOF COIL (other Sport coils available, sold separately) 2-YEAR PARTS & LABOR WARRANTY Official White's MX Sport Product Page White's MX Sport Owner's Manual White's MX Sport - Steve's Review Forum Threads Tagged "whites mx sport" White's Metal Detector Forum

The White's VX3 metal detector was introduced in 2011 and discontinued in 2020. The VX3 is a VLF metal detector aimed primarily at coin, jewelry, relic detecting, saltwater beach detecting, and gold prospecting. The White's VX3 is a multifrequency detector that can also run at one of several single frequencies: 2.5, 7.5, and 22.5 kHz. "The VX3 combines the premier performance of the Spectra V3i with the turn-on-and-go simplicity of the Coinmaster line of metal detector. This top-of-the-line metal detector is as easy to use as an ATM with 8 preset hunting programs. You’ll be ready to discover coins, jewelry, gold, silver, and relics. Take it to the shore with a specialized beach mode. Customization continues with 3 frequencies optimized for different targets: 2.5 kHz, 7.5 kHz, and 22.5 kHz. When you come across a target, the SpectraGraph Target Signature shows on the VX3’s high-resolution color display, helping you decide whether the find is worth digging up. The VX3 is ready to use with White’s SpectraSound wireless headphones. For traditional audio identification, choose from four modes of discrimination and optional tone ID with 191 different sounds. There are essential settings for you to optionally adjust, but the Spectra VX3 is all about making treasure finding easy for every hunter — detecting targets with performance worthy of the Spectra name." Source: White's 2018 catalog White's VX3 metal detector White's VX3 control panel HD COLOR DISPLAY with adjustable backlight TARGET ID with icons VDI NUMBERS for most accurate target ID DEPTH READING OPTIONAL TONE I.D. 4 Audio Modes: Standard, All-Metal, Mixed Mode, Pinpoint 8 TURN-ON-AND-GO! HUNTING PROGRAMS: >> Coin >> Coin and Jewelry >> Salt Beach >> Relic >> Prospecting >> Deep Silver >> Hi-Pro >> Demo MULTI-FREQUENCY DETECTION: 2.5 kHz, 7.5 kHz, 22.5 kHz 9.5” CONCENTRIC WATERPROOF search coil DASHBOARD CONTROLS TRIGGER-ACTIVATED Pinpointing OPTIONAL SPECTRASOUND wireless headphones AA ALKALINE BATTERY PACK with batteries included Official White's VX3 Product Page White's VX3 Owner's Manual White's Metal Detector Forum

The White's V3i metal detector was introduced in 2009 and was still in production when White’s closed up shop in 2020. The V3i is a VLF metal detector aimed primarily at coin, jewelry, relic detecting, saltwater beach detecting, and gold prospecting. The White's V3i is a multifrequency detector that can also run at one of several single frequencies: 2.5, 7.5, and 22.5 kHz. The V3i was originally released as the White's Spectra Vision or simply White's Vision. Due to a name conflict with another company the name was changed to White's Spectra V3. The original Vision and V3 models both had software updates issued. The updates were consolidated into the final White's Spectra V3i model which is still being manufactured today. All previous models can be updated to the latest V3i software by returning the detector to White's Electronics. Details here. "THE SPECTRA® V3i IS WHITE’S PREMIER METAL DETECTOR. We’ve included all our treasure hunting features and your investment is backed by a comprehensive 2-year warranty. The beautiful, full-color HD display clearly explains the depth and metal type of detected objects. And, if you’re just starting out, the V3i has 9 preset programs, for turn-on-and-go versatility that fits the terrain and target... whether it’s coins, jewelry, relics of the past, or gold nuggets. Expert users will appreciate the V3i’s dozens of optional settings. You’ll experience unparalleled depth and sensitivity, even in previously-hunted areas!" Source: White's 2018 catalog White's V3i metal detector White's V3i control panel HD COLOR DISPLAY with adjustable backlight SPECTRASOUND® wireless custom-built headphones (optional) TARGET ID via 3x3 Target ID system - Search, Analyze and Pinpoint VDI NUMBERS for most accurate target ID DEPTH READING 10 TURN-ON-AND-GO! HUNTING PROGRAMS: >> Coin >> Coin and Jewelry >> Salt Beach >> Relic >> Prospecting >> Deep Silver >> High Trash >> Hi-Pro >> Mixed Mode Pro >> Meteorite MULTI-FREQUENCY DETECTION: 2.5 kHz, 7.5 kHz, 22.5 kHz 10” WATERPROOF DD Search Coil NIMH RECHARGEABLE Battery System LIVE “DASHBOARD” control adjustments as you hunt PRECISION ANALYSIS SCREENS showing data for all 3 frequencies: PROSPECTING SCAN POLAR PLOT Vector Screen SPECTRAGRAPH® Target Signature SOIL TYPE SELECT LANGUAGES: English, Spanish, French, German, Russian and Turkish Owner Registration Software pre-installed Official White's V3i Product Page White's V3i Owner's Manual White's V3i Advanced User Guide White's V3i - Steve's Review Forum Threads Tagged "whites v3i" White's Metal Detector Forum

The Fisher CZ-21 metal detector was introduced in 2009 and is still in production. The CZ-21 replaces the earlier CZ-20 model and is essentially the same unit with slight modifications. The Fisher CZ-21 is a fully submersible multifrequency VLF metal detector aimed primarily at underwater use. The 250 foot maximum depth makes the CZ-21 suitable for use while SCUBA diving. Note that as a diving detector both the headphones and coil are hardwired into the control box and cannot be changed. There is a choice of 8" or 10.5" concentric coils at the time of purchase. "The CZ-21 and 1280X are housed in the most rugged enclosures and each have the same collapsible pole assemblies. A short pole assembly is desired when diving, but full extension is preferred when standing or wading. Both are submersible to 250 feet. The control housing can be easily removed for hip-mounting or it can be chest-mounted with an optional chest harness. The CZ-21 has a reputation for being the best saltwater metal detector ever made, while the 1280X is known for being the best fresh water detector, but both can be used in either environment. The CZ-21 is a multi-frequency metal detector that has adjustable discrimination, is easy to use and designed to handle the toughest mineral concentrations on any salt or fresh water beach. The CZ-21 also has Audio Tone Target-ID, a highly sought after feature that allows users to distinguish iron targets from gold. The CZ-21 delivers!" Source: Fisher 2016 catalog Fisher CZ-21 metal detector Fisher CZ-21 control panel Dual Frequency Fourier Domain Signal Analysis 5 kHz and 15 kHz Operating Frequencies One touch Pinpoint (V.C.O. non-motion) Manual Ground Balance All Metal Auto-Tune Mode 2 Year Warranty Discrimination Mode with 3-tone Audio Target-ID Large Target Alert Audio, Faint Target Audio Boost Adjustable Sensitivity, Discrimination and Volume Battery Test Mode Fully Collapsible Pole Assembly Submersible to 250 feet (76 m) Removable control housing Uses four 9V Alkaline batteries Available with 8" (20 cm) or 10" (25 cm) Concentric Round Open Searchcoil Weight: 5.3 lbs. (2.4 kg) w/8" (20 cm) Searchcoil, 5.9 lbs. ( 2.7 kg) w/10" (25 cm) Searchcoil Official Fisher CZ-21 Product Page Fisher CZ-21 Owner's Manual First Texas (Fisher) Metal Detector Forum

The Fisher 1280X metal detector was introduced in 1985 and is still in production. It is a fully submersible 2.4 kHz induction balance metal detector aimed primarily at underwater use. The 250 foot maximum depth makes the 1280X suitable for use while SCUBA diving. Note that as a diving detector both the headphones and coil are hardwired into the control box and cannot be changed. There is a choice of 8" or 10.5" concentric coils at the time of purchase. "The CZ-21 and 1280X are housed in the most rugged enclosures and each have the same collapsible pole assemblies. A short pole assembly is desired when diving, but full extension is preferred when standing or wading. Both are submersible to 250 feet. The control housing can be easily removed for hip-mounting or it can be chest-mounted with an optional chest harness. The CZ-21 has a reputation for being the best saltwater metal detector ever made, while the 1280X is known for being the best fresh water detector, but both can be used in either environment. The deep-seeking 1280X Aquanaut features turn-on-and-go operation because it automatically tunes itself to the changing conditions. It is very easy to use. No fine tuning, no threshold and no ground balancing adjustments are needed. Turn it on, set the volume, sensitivity and discrimination, and you are set for hours of care-free hunting." Source: Fisher 2016 catalog Fisher 1280X metal detector Fisher 1280X control panel Automatic turn-on-and-go operation Adjustable Sensitivity, Discrimination and Volume Audio and Visual Target Response Battery Test Mode Fully Collapsible pole assembly Submersible to 250 feet (76 m) Removable control housing with belt-mount attachment Arm Strap included Uses 8 AA batteries - Up to 75 Hours of Battery Life Available with 8" (20 cm) or 10" (25 cm) Concentric Round Open Searchcoil Weight: 5.8 lbs. (2.6 kg) w/8" (20 cm) Searchcoil or 6.3 lbs. (2.9 kg) w/10" (25 cm) Searchcoil 2.4 kHz Operating Frequency 2 Year Warranty Official Fisher 1280X Product Page Fisher 1280X Owner's Manual First Texas (Fisher) Metal Detector Forum

The Fisher Gemini-3 metal detector was introduced in 1988 and is still in production. It is worth mentioning that the Gemini-3 is a direct descendent of the 1938 Fisher Metallascope or "M-Scope", the first ground penetrating metal detector to receive a patent. The Gemini-3 is a "two-box" metal detector that is designed for finding large objects at depth. Two box detectors are not sensitive to items much smaller than a baseball, but can detect large items like a 55 gallon drum or water main to depths exceeding ten feet. Two box detectors are a favorite of the classic "treasure hunter" but are more often used by utility companies and surveyors. "Two-box metal detectors are used by prospectors, geologists, treasure hunters and public utility companies to locate large, deep objects, ore veins, pipes and cables. Fisher Labs, the recognized leader in the field, was granted the first two-box metal detector patent in 1938. The GEMINI-3 is respected for being the best there is because it goes deeper, traces farther and is easier to use than any other cache finder in its class." Source: Fisher 2014 catalog Fisher Gemini-3 metal detector V.C.O. audio response for target pinpointing Inductive Search Mode Conductive Trace Mode Wide and Narrow Scan Inductive Trace modes 60-Cycle Noise Reduction circuitry Power On-Off Push-Pull switches Uses 16 AA batteries; 8 in Transmitter and 8 in Receiver Battery Test Meters 81.92 kHz Operating Frequency Weight: 7.5 lbs. (3.4 kg) 5 Year Warranty Official Fisher Gemini-3 Product Page Fisher Gemini-3 Owner's Manual First Texas (Fisher) Metal Detector Forum

The Fisher F19 metal detector was introduced in 2014 as the Fisher F19 Ltd and is still in production. The F19 Ltd models are camouflage paint versions while the F19 has Fisher's standard black and gold colors. There is no difference between the units electronically. The F19 is a 19 khz VLF metal detector aimed primarily at coin, jewelry, and relic detecting. The F19 is a variant of the 19 kHz Fisher Gold Bug Pro and so it also is very good at gold prospecting. The F19 is available at time of purchase with either a 6" x 10" or 7" x 11" DD coil for the same price. "The F19 is the best relic hunting machine ever! Fe-Tone® adjustable iron audio allows you to set the volume of ferrous targets lower than the volume of non-ferrous targets for increased clarity on desirable targets. GROUND-GRAB® Computerized Ground Balancing and Manual Ground Balance making it easy to tune the F19 to the soil you are hunting in. Get your F19 and find what everyone else has left behind!" Source: Fisher 2016 catalog Fisher F19 metal detector Fisher F19 control panel FeTone, Adjustable Iron Audio Enhanced V-Break, Tone Discrimination System Notch Window with Adjustable Notch Width Backlit Display (Backlight) Computerized GROUND GRAB, One Touch Ground Balance with Manual Override Unmatched Target Separation in Iron & Trash Continuous Ground Condition Readout: Ground Phase value indicates type of mineralization / Fe304 graphic indicates amount of mineralization Ground balance all the way to salt Static All Metal Pinpoint with Depth Indicator 19 kHz Operating Frequency Choice of 6" x 10" or 7" x 11" Waterproof DD Searchcoil Ultra-Lightweight, only 2.5 lbs. (1.1 kg.) Official Fisher F19 Product Page Fisher F19 Owner's Manual Fisher F19 Data & Reviews First Texas (Fisher) Metal Detector Forum

The Fisher CZ-3D metal detector was introduced in 2004 and is still in production. The CZ-3D replaced the earlier CZ-5 Quicksilver model and is essentially the same unit with modifications to the discrimination scheme. The Fisher CZ-3d is a multifrequency VLF metal detector aimed primarily at coin, jewelry, and relic detecting. "The CZ-3D is an easy-to-use, multi-frequency detector known for finding the deeper coins and jewelry. Dual frequencies broaden the machine's ability to respond to targets across a wider conductivity range, achieving improved depth on most targets. The CZ-3D has 4-Tone Audio Target-ID with a deep target audio boost and easy push-button Pinpoint Mode with a target depth meter. It also has a Wet Sand Mode and an Enhanced Mode for high performance Target-ID. This manual ground balance VLF motion detector can also be used with suggested settings for tum-on-and-go operation." Source: Fisher 2016 catalog Fisher CZ-3D metal detector Fisher CZ-3D control panel Silent Search VLF Slow Motion Preset adjustable Discrimination Adjustable Volume, Sensitivity Salt Mode for wet sand searching Pinpoint Pushbutton with Depth meter Visual Target-ID meter Four Tone Audio Target-ID Big Target alert Faint Target Audio Boost Handle or Hip Mount 1/4" (6.3 mm) Headphone Jack Uses two 9V batteries Standard with 8" (20 cm) Concentric Round Open Waterproof Searchcoil, 7' (2 m) cable length 5 kHz and 15 kHz Operating Frequencies Weight: 3.5 lbs. (1.6 kg) 5 Year Warranty Official Fisher CZ-3D Product Page Fisher CZ-3D Owner's Manual Notes On Fisher CZ Detectors First Texas (Fisher) Metal Detector Forum

The Fisher Gold Bug 2 metal detector was introduced in 1995 and is still in production. It is a 71 kHz induction balance metal detector aimed primarily at gold prospecting. "The Gold Bug 2 is the best detector on the market for finding the tiniest gold nuggets. It offers extraordinary sensitivity; at 71 kHz it features the highest operating frequency on the market. The Gold Bug 2 also features iron discrimination, is dust and moisture resistant, has audio-boost and can operate in any type of soil with the choice of three mineralization modes. In the Iron Disc Mode the detector can identify hot rocks and small iron trash items like nails. An Audio Boost Mode increases the depth capability and automatically increases the volume of any faint signal such as a small or deep nugget." Source: Fisher 2016 catalog Fisher Gold Bug 2 metal detector Fisher Gold Bug 2 control panel High Precision Dual-Control Ground Balance Iron Disc Mode for Iron & Hot Rock Rejection Deep Target Audio Boost Mode High, Normal and Low Mineralization Modes Adjustable Threshold, Volume and Sensitivity Audio-Tone Battery Test Mode Lightweight and Hip-mountable 1/4" (6.3 mm) headphone jack Uses two 9V batteries Available with 6-1/2" (17 cm) or 10" (25 cm) DD Elliptical Closed Waterproof Searchcoil 71 kHz Operating Frequency Weight: 2.9 lbs. (1.3 kg) 5 Year Warranty Official Fisher Gold Bug 2 Product Page Fisher Gold Bug 2 Owner's Manual Fisher Gold Bug 2 - Steve's Review Forum Threads Tagged "fisher gold bug" First Texas (Fisher) Metal Detector Forum

The Fisher Gold Bug metal detector was introduced in 2009 and is still in production. The Gold Bug is a 19 khz VLF metal detector aimed primarily at gold prospecting, relic, jewelry, and coin detecting. This new digital Gold Bug should not be confused with the 1987 analog Gold Bug which has no LCD screen. Note that the Gold Bug normally comes with a non-standard 5" round coil. This is good for nugget detecting but may be too small for some common uses like coin detecting. The Gold Bug has another version that adds a manual ground balance adjustment - the Fisher Gold Bug Pro. "The Gold Bug® family has revolutionized gold prospecting with new prospecting tools, Target-ID, incredible depth and all at an affordable price! Its fast retune speed and biaxial search coils create superb target separation with impressive depth. V-Break™, the industry’s first Variable Breakpoint tone discrimination system, allows user control of the multi-tone Audio ID system. This feature helps distinguish iron targets with a distinctive low audio tone while non-ferrite targets like gold, induce high tones. Tone discrimination combines with a dead-accurate Visual ID system to give gold prospectors a vital new tool in finding gold without having to dig any iron targets. An expanded 40-Point Iron ID target range helps differentiate between larger iron objects and smaller nails and pieces. The way it minimizes the masking effects of ferrous targets near non-ferrous targets is simply amazing! Two more unique features are the real-time display of the Ground Phase value and an Fe3O4 meter that indicates the amount of mineralization present. These features monitor changes in soil conditions to locate and trace black sand concentrations where gold is commonly found. The Ground Balance system handles the toughest of ground conditions, capable of balancing all the way to salt. No longer do you need a specialized detector for prospecting and another for coins and relics; the Gold Bug excels at both!" Source: Fisher 2014 catalog Fisher Gold Bug metal detector Fisher Gold Bug control panel Discrimination Mode for coins and relics Motion All Metal Mode No-motion Pinpoint with Depth Indicator Computerized GROUND GRAB® Continuous Ground Condition Readout Continuous Ground Phase and Mineralization Readout V-Break™, Industry’s first Variable Tone Breakpoint Discrimination Threshold and Gain Adjustments Signal Strength Indicator Target-ID and 2-Tone Audio that includes V.C.O. 1/4” (6.3 mm) and 1/8” (3.2 mm) headphone Jacks Uses one 9V Alkaline battery Standard with 5” (13 cm) DD Round Closed Waterproof Searchcoil (Gold Bug and Pro only) 19 kHz Operating Frequency Weight: 2.5 lbs. (1.1 kg) 5 Year Warranty Official Fisher Gold Bug Product Page Fisher Gold Bug Owner's Manual Gold Bug Versions Compared Forum Threads Tagged "fisher gold bug" First Texas (Fisher) Metal Detector Forum

The Fisher F4 metal detector was introduced in 2007 and discontinued in 2018. The F4 is a 5.9 kHz VLF metal detector aimed primarily at coin, jewelry, and relic detecting. "The F4 is an easy-to-use deep seeking metal detector. It handles mineralized soil conditions with an 11”DD Searchcoil and Ground Balance control. Easily switch between All Metal, Discrimination and Pinpoint Modes with onetouch operation while the LCD display continually shows Notch and Discrimination settings. The F4 also has a four-tone Audio ID system. Professional features at an affordable price!" Source: Fisher 2014 catalog Fisher F4 metal detector Fisher F4 control panel Deep Seeking All Metal Mode with Manual Ground Balance 11 Visual Target-ID Categories Numeric 0-99 Target-ID Readout Target-ID Confidence Bar Graph One-Touch Notch One-Touch Pinpoint with Numeric Depth Readout Threshold, Sensitivity and Discrimination Adjustments 4 Tone Audio ID 1/4” (6.3 mm) Headphone Jack Uses two 9V Alkaline batteries Standard with 11” (28 cm) DD Elliptical Open Waterproof Searchcoil 5.9 kHz Operating Frequency Weight: 2.9 lbs. (1.3 kg) 5 Year Warranty Official Fisher F4 Product Page Fisher F4 Owner's Manual First Texas (Fisher) Metal Detector Forum

The Fisher F5 metal detector was introduced in 2007 and was discontinued in 2018. The F5 is a 7.69 kHz VLF metal detector aimed primarily at coin, jewelry, and relic detecting. "With a combination of analog and digital controls, the F5 has one of the best user interfaces ever designed. Control knobs and touchpads are accessible with a single hand. Gain and Threshold knobs are strategically placed to easily “thumb” the controls up and down while analyzing a target, then easily return to the previous positions and it’s all visible in real-time. This high-tech detector with automated features is easy for beginners and has enough fine tuning control options to satisfy the professional." Source: Fisher 2014 catalog Fisher F5 metal detector Fisher F5 control panel High Resolution Manual Ground Balance Visual Target-ID by Category and 0-99 Numeric Readout Frequency Shift Target-ID Confidence Bar Graph One-Touch Notch Push Button Static Pinpoint with Numeric Depth Readout Threshold and Gain Adjustments 4-Tone Audio ID Continuous Ground Mineralization and Ground Phase Readout 1/4” (6.3 mm) Headphone Jack Uses two 9V batteries Standard with 10” (25 cm) Concentric Elliptical Open Waterproof Searchcoil 7.69 kHz Operating Frequency Weight: 2.9 lbs. (1.3 kg) 5 Year Warranty Official Fisher F5 Product Page Fisher F5 Owner's Manual First Texas (Fisher) Metal Detector Forum

The Fisher F70 metal detector was introduced in 2008 and discontinued in 2018. The F70 is a 13 kHz VLF metal detector aimed primarily at coin, jewelry, relic, and gold nugget detecting. "The F70 is a multipurpose high-performance metal detector noted for its quick response and fast retune speed so the user can cover ground quickly and still get great target separation. The 13 kHz operating frequency means it responds equally well to gold nuggets, coins and jewelry. The F70 has two different retune speeds: fast (default) and slow, ideal when searching for very deep or for very small targets such as gold nuggets. User can choose from two program modes." Source: Fisher 2014 catalog Fisher F70 metal detector Fisher F70 control panel All Metal Auto-Tune Mode Advanced Software-Based Motion Discrimination Mode Large LCD Screen with 0-99 Numeric Target Identification Display One-touch Pinpoint with Variable Audio Pitch Multiple Audio ID Tone Options Notch Mode Soil Bar Graph Readout (Magnetic Mineralized Soil) Confidence Bar Graph Readout (Signal Strength) GROUND GRAB® Touchpad Ground Balancing Non-Volatile Memory Saves Settings Back Light for Low Light Conditions 1/4” (6.3 mm) Headphone Jack Frequency Shift Options Uses 4 AA batteries Standard with 11” (2.8 cm) DD Elliptical Open Waterproof Searchcoil 13 kHz Operating Frequency Weight: 2.9 lbs. (1.3 kg) 5 Year Warranty Official Fisher F70 Product Page Fisher F70 Owner's Manual First Texas (Fisher) Metal Detector Forum

The Fisher F75 Ltd metal detector is a model in the F75 series introduced in 2007 and is still in production. It is a 13 kHz VLF metal detector aimed primarily at coin, relic, jewelry, and gold nugget detecting. Note that the F75 Ltd was also called the F75 Special Edition, leading to some confusion regarding the various F75 models. The latest version of the F75 Ltd is the F75+. The original F75 Ltd model was upgraded in 2014 to include Digital Shielding Technology (DST) but the model name as sold remained the same. Earlier models are just called the F75 Ltd and the newer version is referred to as the F75 Ltd DST by users. These models should not be confused with the basic F75 model which also come with and without DST. "The F75 Ltd and Fisher F75 are two of the best metal detectors on the market today. Ideal for coins, relics, jewelry, caches and gold nuggets; they are truly versatile. When the F75 was released it raised the bar in the industry for impressive depth and incredible target separation capability. Its unparalleled "iron see-through" has been the talk of the industry. Sites thought to have been cleaned out now produce countless artifacts. These brothers of a sort share a core group of features. The Ltd version comes with additional Boost and Cache Modes, a 5" DD Round Searchcoil and a set of rain covers for the control and battery housing. The advanced technology of the Fisher F75 Ltd makes it the deepest and most versatile detector on the market today. Boost Mode increases depth and gives an added edge when hunting forest clutter or deep vegetation. Cache Mode detects large objects buried deep. Combined with our 15" DD Searchcoil it is the ideal combination when searching for deep caches, projectiles or meteorites. Also included with the F75 Ltd is a 5" DD round Searchcoil, excellent in trashy areas and for locating small items and gold nuggets. A set of rain covers for the control and battery compartments is also included." Source: Fisher 2016 catalog Fisher F75 Ltd metal detector Fisher F75 Ltd control panel Large LCD Screen with 0-99 Numeric Target Identification Display Trigger-Actuated Pinpointing with Variable Audio Pitch 8 Different Audio ID Tone Options Multiple Program Modes, 3 All Metal Modes Double-Filter Discrimination for Searching Trashy Areas Notch and Discrimination Controls Magnetic Mineralized Bar Graph Readout Trigger Actuated FASTGRABTM Ground Balance with Manual Override Non-Volatile Memory Saves Settings Back Light for Low Light Conditions Adjustable Armrest and Pole Assembly 1/4" (6.3 mm) Headphone Jack 7 Frequency Shift Options Uses Four AA batteries Comes Standard with 11" (28 cm) DD Elliptical Open Waterproof Searchcoil 13 kHz Operating Frequency Weight: 3.5 lbs. (1.6 kg) 5 Year Warranty Official Fisher F75 Ltd Product Page Fisher F75 Ltd Camo Owner's Manual Fisher F75 Special Edition (Black) Owner's Manual Fisher F75 Ltd with DST Owner's Manual Fisher F75 Ltd / Special Edition - Steve's Review Forum Threads Tagged "fisher f75" First Texas (Fisher) Metal Detector Forum

The Fisher F75 metal detector was introduced in 2007 and is still in production. It is a 13 kHz VLF metal detector aimed primarily at coin, relic, jewelry, and gold nugget detecting. Note that the F75 is the base model of a series that includes many variations, leading to some confusion, so be careful when comparing advertised versions of this detector. See also the F75 Ltd and F75+. The original F75 model was upgraded in 2014 to include Digital Shielding Technology (DST) but the model name as sold remained the same. Earlier models are just called the F75 and the newer version is referred to as the F75 DST by users. These models should not be confused with the Limited (Ltd) and Special Edition (SE) models which also come with and without DST. "The F75 and F75 Ltd are two of the best metal detectors on the market today. Ideal for coins, relics, jewelry, caches and gold nuggets; they are truly versatile. When the F75 was released it raised the bar in the industry for impressive depth and incredible target separation capability. Its unparalleled "iron see-through" has been the talk of the industry. Sites thought to have been cleaned out now produce countless artifacts. These brothers of a sort share a core group of features. The Ltd version comes with additional Boost and Cache Modes, a 5" DD Round Searchcoil and a set of rain covers for the control and battery housing." Source: Fisher 2016 catalog Fisher F75 metal detector Fisher F75 control panel Large LCD Screen with 0-99 Numeric Target Identification Display Trigger-Actuated Pinpointing with Variable Audio Pitch 8 Different Audio ID Tone Options Multiple Program Modes, 3 All Metal Modes Double-Filter Discrimination for Searching Trashy Areas Notch and Discrimination Controls Magnetic Mineralized Bar Graph Readout Trigger Actuated FASTGRABTM Ground Balance with Manual Override Non-Volatile Memory Saves Settings Back Light for Low Light Conditions Adjustable Armrest and Pole Assembly 1/4" (6.3 mm) Headphone Jack 7 Frequency Shift Options Uses Four AA batteries Comes Standard with 11" (28 cm) DD Elliptical Open Waterproof Searchcoil 13 kHz Operating Frequency Weight: 3.5 lbs. (1.6 kg) 5 Year Warranty Official Fisher F75 Product Page Fisher F75 Owner's Manual Fisher F75 DST Owner's Manual Fisher F75 - Steve's Review Forum Threads Tagged "fisher f75" First Texas (Fisher) Metal Detector Forum

The Minelab X-Terra 705 metal detector was introduced in 2009 and is still in production. The X-Terra 705 is a selectable frequency VLF metal detector aimed primarily at coin, jewelry, and relic detecting. The X-Terra models are unique in that they sense the coil attached to the detector, and then match the detector frequency to the coil. Coils are made in 3 kHz, 7.5 kHz, and 18.75 kHz versions. The standard X-Terra 705 comes with a 9" round concentric 7.5 kHz coil, good for general purpose metal detecting. The alternative Minelab X-Terra 705 Gold comes instead with an 18.75 kHz 6" x 10" DD coil as a better option for gold prospectors. "The best for all-purpose detecting. The X-TERRA 705 offers the ultimate detecting experience. It can be used for gold prospecting as well as for coin & treasure hunting, simply by switching between available pre-programmed modes. Thanks to Coin & Treasure and Gold Prospecting Modes you get a gold detector plus coin, treasure & relic detector all in one! Across diverse detecting conditions and in the toughest environments, the X-TERRA 705 delivers optimal performance with ease. An all-purpose detector capable of all types of detecting, from coin & treasure to relic, beach and gold prospecting. Performance and features driven, the versatility of this detector makes it without question, the leading detector in this category. The specialised Prospecting Mode has improved sensitivity making the detector more sensitive to small target signals. The Prospecting Mode can be used in highly mineralised, 'difficult' areas. The high frequency Double-D coils offer advantages, as they are adept at handling these conditions. The Prospecting Mode is ideal not only when searching for gold nuggets but also for small relics and some types of jewellery." Source: Minelab website Minelab X-Terra 705 metal detector Minelab X-Terra 705 control panel Minelab’s proprietary VFLEX technology. This allows you to change the frequency simply by changing coils. You don't need another detector! Standard 7.5 kHz Concentric coil is waterproof, suitable for detecting on beach and riverside. Compatible with low, mid and high frequency coils - all 7 X-TERRA accessory coils can be used with the X-TERRA 705. Automatic/Manual Ground Balancing, Tracking and now with Tracking Ground Balance Offset adjustment. This creates a performance advantage in certain areas such as wet/dry sand transition and hot rock locations, by setting the balance slightly positive or negative. True automatic Ground Balance eliminates false ground noises so you can hear elusive small gold signals. Four preset detecting patterns that can also be customised plus All-Metal mode. Adjustable Iron Mask – designed for Prospecting Mode. This feature allows you to find desirable targets lying close to ferrous metals. Effective noise cancel reduces interference. Threshold tone for more accurate target ID interpretation. Two Pinpoint Modes: Auto and Sizing. Target ID stability – precise, solid responsiveness in high-trash areas enabling you to efficiently and effectively search sites with a high concentration of junk. Also a great coin detector with highly accurate discrimination and numeric target identification. Positive transflective LCD display providing a back light only in dim light conditions enabling better screen visibility in poor lighting whilst saving battery charge in well lit conditions. Depth indicators, update continuously, even in Pinpoint mode. Runs on just 4 x AA batteries. Lightweight, balanced design (only 1.3kgs) so you can enjoy detecting for longer periods. Official Minelab X-Terra 705 Product Page Minelab X-Terra 705 Owner's Manual Minelab X-Terra 705 Gold - Steve's Review Forum Threads Tagged "minelab x-terra" Minelab Metal Detector Forum

The Fisher Gold Bug Pro metal detector was introduced in 2010 and is still in production. It is a 19 khz VLF metal detector aimed primarily at gold prospecting, relic, jewelry, and coin detecting. The Gold Bug Pro has been a very popular entry level gold prospecting detector. Note that the Gold Bug Pro normally comes with a non-standard 5" round coil. This is good for nugget detecting but too small for most common uses. The Gold Bug Pro can be had however with other coil options like the 7" x 11" DD (Gold Bug DP model) if desired. This model is also sold without a manual ground balance control as the basic Fisher Gold Bug. "The Gold Bug® family has revolutionized gold prospecting with new prospecting tools, Target-ID, incredible depth and all at an affordable price! Its fast retune speed and biaxial Search coils create superb target separation with impressive depth. V-BreakTM, the industry's first Variable Breakpoint tone discrimination system, allows user control of the multi-tone Audio ID system. This feature helps distinguish iron targets with a distinctive low audio tone while non-ferrite targets like gold, induce high tones. Tone discrimination combines with a dead-accurate Visual ID system to give gold prospectors a vital new tool in finding gold without having to dig any iron targets. An expanded 40-Point Iron ID target range helps differentiate between larger iron objects and smaller nails and pieces. The way it minimizes the masking effects of ferrous targets near non-ferrous targets is simply amazing! Coin and relic hunters marveled at how well the Gold Bug® Pro performed with our legendary 11 "DD Searchcoil, and the Gold Bug® DP was bom. Two more unique features are the real-time display of the Ground Phase value and an Fe304 meter that indicates the amount of mineralization present. These features monitor changes in soil conditions to locate and trace black sand concentrations where gold is commonly found. The Ground Balance system handles the toughest of ground conditions, capable of balancing all the way to salt. No longer do you need a specialized detector for prospecting and another for coins and relics; the Gold Bug excels at both!" Source: Fisher 2016 catalog Fisher Gold Bug Pro Metal Detector Fisher Gold Bug Pro Control Panel Discrimination Mode for coins and relics Motion All Metal Mode Computerized GROUND GRAB with Manual Adjust No-motion Pinpoint with Depth Indicator Continuous Ground Phase and Mineralization Readout V-BreakTM, Industry's first Variable Tone Breakpoint Discrimination Threshold and Gain Adjustments Signal Strength Indicator Target-ID and 2-Tone Audio that includes V.C.O. 1/4" (6.3 mm) and 1/8" (3.2 mm) headphone Jacks Uses one 9V Alkaline battery Standard with 5" (13 cm) DD Round Closed Waterproof Search coil 19 kHz Operating Frequency Weight: 2.5 lbs. (1.1 kg) 5 Year Warranty Official Fisher Gold Bug Pro Product Page Fisher Gold Bug Pro Owner's Manual Fisher Gold Bug Pro - Steve's Review Gold Bug Versions Compared Forum Threads Tagged "fisher gold bug" First Texas (Fisher) Metal Detector Forum