Steve Herschbach

It was the end of June and since I was camping out there was only so much I could get done with my satellite phone. I went and saw the owners of the claims on upper Jack Wade Creek and cut a percentage deal with them for detecting on their claims. Then I loaded up my camp and hit the road for Anchorage on July 1st. The house was still on the market and I had access so I put a cot in a room and spent a couple days checking with the realtors, paying bills, and getting a few supplies. Then back to Chicken on the 4th of July for a quick visit at the annual 4th of July party. My friend George White was there, so we headed in up to Jack Wade and set up camp. The weather had cooled down a bit which was just fine. There was a huge fire in the Tok area and if the wind was right the smoke could get pretty thick in the area but that also seemed to be getting under control. I took George to a place where I had found a large flake of gold previously and where I thought there had to be more gold. I got this classic double blip signal with the Minelab, the kind nails make when you run over them length-wise. I told myself "nail" but I was in dig it all mode and went ahead and dug it up. Much to my surprise a 3/4 ounce round nugget with a bit of rock in it popped out of the ground! The double blip? There was a piece of steel a couple inches away. Yet another lesson in how trash signals can turn out to be anything but. The Long Road To Chicken, Alaska - Taylor Highway on Way From Tok To Chicken That area seemed to give up at that point so we wandered down the creek hitting different spots. I found a small pile of rubble, not big enough to call a tailing pile. More like a big pile of dirt set aside from digging out a channel. Right on top I get a real nice piece weighing almost a half ounce. There are several types of gold on Jack Wade and this one was a distinctly deeper gold color that the more common lighter colored stuff. And then another nice nugget, about three pennyweight from a little pile of dirt right next to the road. It was one of the days that makes up for the days of finding nothing with 1-1/3 oz in my pocket. George had wandered off and when I ran into him he pulled out a pill bottle and shook it. It was full of small nuggets, about 1/8 ounce of gold. I was puzzled and asked him if he had brought those with him from town to show me. He said no, he had just dug them all! He had got bored running the Minelab digging nails so grabbed the Gold Bug 2 and hit the bedrock. All those nuggets came out of one little pocket in the bedrock he had found. It was a good day for both of us. End of Week Three, Almost 5 Ounces of Gold By the end of the third week I was sneaking up on 5 ounces of gold total. I found out my wife was flying up to Anchorage to finish up some business so on the 13th I headed back to town to see her and take a break. There were very few people in the area metal detecting but there were various dredging and other operations on the creeks. Here are a few photos of them to finish up this episode. You can see how low water conditions in the area were that summer. Chris & Bernie Run Their 4" Dredge Gold Dredge on the Fortymile River Mining Gear Stashed on Bank of Fortymile River Commercial Operation Next To Road on Jack Wade Creek

Great video showing some really great gold!

Hilarious! I only ever watched a few episodes of Gold Rush. Not good for my blood pressure I am afraid. I like this a lot better!

No shot of the sleeping bag but here it is one morning, just got up. Flip the back up, there is my kitchen, with built in rain cover.

My standard prospecting rig now for many years is the Toyota 4-Runner. True four wheel drive, narrow, goes about anywhere, 21 mpg, and yes, I sleep in it all the time. The passenger seat can fold back down level with the back seat and with a mattress on top makes a decent bed. I bought my last one used with 50,000 miles on it and drove it ten years, sold in great condition at 170,000 and just got a used 2005 with 70K miles for $17,000 and frankly I thought that was too much money! With any luck it will take me the rest of my serious prospecting years. I am looking around for a little 16' pull behind though I can park and leave as a base camp.As much as a van and the concept of having it all in one rig appeals to me I think a two piece operation suits me best. I can go light and hardcore when needed, or upgrade to a little luxury if I feel like it. In just the last year I went to too many places there is no way a van would have went, just for being too wide. But that is me. A van sounds like a great idea Tom, and I am sure it would be for a lot of people. Maybe even me one of these days.

I have thought a 4WD van would make a nice compromise for prospecting and camping. For that kind of money though I would probably invest in a small house! Another sign of getting old I guess. I just can't believe what new vehicles cost.

Waterproof to control box but keep that box dry!

The Gold Bug 2 is interesting in that it probably shows more difference between an air test and an in ground test than any other prospecting detector. The super high frequency is hot on tiny gold but also reacts strongly to ground mineralization. That means small coils work best, because large coils see too much ground. The large Gold Bug 2 coil will of course cover more ground, but in anything other than mild ground can actually give you less depth, not more. However, in very mild ground it can perform well. The 6" coil almost never leaves my Gold Bug 2. I think of the 10" coil as the big coil. The 14" I generally do not recommend unless you have mild ground. I did use a 14" coil to find a 5 ounce nugget at good depth at Ganes Creek, Alaska. In milder ground the 14" coil will punch deeper on large gold, as show by this chart.

All Minelab coils and detectors come with scuff covers. Most brands do not. I know there are people that buy a Minelab who are used to other models who just go ahead and get a scuff cover also. I remember a guy telling me once his scuff cover would not go on the coil, and I had to point out to him it already had a scuff cover on it!

Good catch Skip, I did not see that, but the GPZ housing does look longer in the photos at least. Rick, all we can do is keep on the manufacturers about ergonomics. The problem is so few people that work at detector companies actually go detecting. If you just heft any of the heavy machines they feel just fine. It is after 6 hours it is a different story, and throw rough terrain in there and it just gets worse. We now have so many choices in VLF detectors that there is no reason to swing a heavy VLF. Unfortunately ground balancing PI is another story, with limited options. The prize for best GBPI ergonomics so far goes to the 3.5 lb TDI SL but unfortunately the horsepower is lacking. Having used the TDI SL I can only dream of what the SDC 2300 would be like in a similar housing.

The weather in the Fortymile area the summer of 2013 was really hot in June and July. Hot for Alaska anyway running in the 80's and into the 90's, and with the humidity it just gets a bit sweltering out there in the tailing piles. A lot of the stuff I was working was steep and bare sided. Lots of side-hilling with sweat dripping off me. Jack Wade was dredged with a bucket line on the lower portion, but it was remined later with bulldozers. The upper valley was mined with bulldozers and draglines. There are just all sorts of different tailing piles up and down the creek. In narrow portions of the valley tailings are stacked and pushed high up against the valley wall. Here is a shot looking down from on top of one, with the creek below. The creek is running very low due to hot, dry weather. Working the piles can be a lot of work, with the steep sides and loose rubble. Here is Bernie working a pile with a Minelab X-Terra 705. The ground is not all that mineralized really and there is a lot of trash, so a good VLF can actually be pretty effective on Jack Wade. The piles in the wider portions of the valley are piled up but can also be pushed into huge relatively flat areas. Here is one long pile I worked pretty hard a couple times. I got a number of nice half to couple gram pieces out of it. These piles are large and it can take a couple days just to work something like this halfway well. Since I was in this for the long run my days varied a lot. There is pretty much more daylight than a person can stand, so some days I might work in the morning, take a break for lunch, work the afternoon, break for a quick meal, then work a few more hours in the evening. Other days it was just so hot I might take a break mid-day and pick up again later when it cooled down. Or just quit early. Afternoon thunderstorms were common. This second week was lots of hours and not a lot of gold showing up. I try to average a couple grams a days and I was just barely doing that. Here is my journal entry from June 27, a particularly hot, muggy day: "Hunted Bernie's Pile for four hours with Minelab, dug tons of targets, sweat pouring. Muggy and a fire someplace making smoke in the air. Shot the BS with Bernie at lunch, it rained a bit. Then hunted two hours on Steve's Hill with 18" mono. Got a few deep nails and a can so felt good about that, but no gold. Lots of interference in the afternoon, no gold. Quit early and took a dip on the creek. Brrrr!! ice cold but felt good! Ray from California came over when I got back to camp, had me sign a copy of ICMJ article I did for his buddy Ron" We end up naming various tailing piles, often after the first person to find gold on them, or some location based name. It helps as you talk about stuff "oh, yeah, I was hunting Dead Caribou pile and found a nugget" is a typical comment. Steve's Pile was one I had found gold on with a smaller Minelab coil and rehunted with the larger coil. My comment about feeling good about finding nails and a can is not sarcasm. I was happy it was coming up with targets missed previously. Any one could have been a nugget. You do not like digging junk, this is not the game to be in. Ray was a guy up from California I met in the campground. He was there by himself, then met up with some buddies who drove up, and then alone again after they left. Nice guy, hard working, mostly shovel work though. He was getting decent but not great gold considering how hard he was working, but I think he was having a good time just being in Alaska. Here is an example of a more typical flatter type tailing area seen in wider portions of the creek. Here I am below in my typical get up, though this summer saw a lot of days with me in a t-shirt. Note the lack of head net. The hot dry conditions meant minimal bugs, a real treat in Alaska. I am packing a little snub nosed .44 here but ditched it for most of the trip when it became apparent bears were few and far between in the area. There was a lot of caribou kill around from hunters the previous fall and I would get nervous stumbling on the carcass but everything was long since picked over. Never did see a bear there all summer though they were there. Some scat here and a track there made that evident. I was running a Minelab GPX 5000 with a Nugget Finder 14" x 7" mono that JP gave me when I was in Australia. Just loved that little coil, great for working in the bushes and rubble. Then I would use another JP gift, the Nugget Finder 18" mono now and then if I thought an area worth the effort of digging deep junk. The pick is a Walco pick that I put a hickory sledge hammer handle on, very handy as a walking stick on those steep hillsides. Here are a couple typical nugget finds from week 2. The little round slug is a classic Jack Wade nugget, gold from ancient high river deposits already well rounded before Jack Wade cut the old channels and rolled them around some more. Who knows where the source is, probably long since eroded away. The whole time I was prospecting my house was for sale in Anchorage. I had my satellite phone and would call my wife every day in case the realtor had called her. We had one deal early on that fell through, and now I found out a second deal had come apart. The market in Anchorage was hot and our realtor was certain no problem selling the place but it was still kind of hanging over me the whole time. The second week wrapped up with only smaller nuggets found, but total was now up to 3.37 ounces in two weeks. I was still basking in the glow of the big nugget found the previous week and really just enjoying myself at this point. Here is a different bit of Alaska gold to finish up the second installment of this tale.

Hi JP, Well, it all depends on weight. I have a CTX 3030 and at the time I posted that in 2012 I saw lots of people trying to make a GPX 5000 into a "normal" detector. You see detectors with external batteries and speakers strapped on; pretty common actually. The problem of course is that at 5.3 lbs to start with on the GPX by the time you add the battery, speaker and such it all adds up. The CTX 3030 weighs 5.2 lbs and my vision was a GPX 5000 stuffed into a CTX housing and weighing just that. I think we can agree that would be pretty sweet. Already though looking at GPZ photos I am seeing a larger battery and larger coil so that's obviously not going to happen. I have given Garrett a ton of grief over the ATX weighing too much and don't see why I would be any easier on Minelab if the GPZ is overly heavy. There is no reason at all that I can see why detectors designed from the ground up for prospectors can't weigh less. However, nobody seems to be doing that designing. The excuse used to be prospecting is a niche market, but can that really be true any more?

This ad image is being circulated widely on the internet. Through the magic of zoom, cut, and paste, here are some close up shots. More information on the Minelab GPZ 7000 here as available. Close Up of Minelab GPZ 7000 Armrest and Battery Close Up of Minelab GPZ 7000 LCD Display and Controls Close Up of Minelab GPZ 7000 GPZ 14 Waterproof Coil

And so it all begins yet again. The speculation. The accusations. The arguments - the drama! And once again everyone gets to find out where they fit in the scheme below.

The new Tide will make my already whiter whites whiter. You can make statistics say whatever you want. It will be fun to watch. It is all very predictable. Every PI that Minelab has ever released is met with extreme skepticism and complaints about the price. Rewind the clock to when the GPX 5000 was released. You can Google up tons of posts about how it really is no different than a GPX 4500 and not worth the extra money. Now if you wander around the forums it is now just a commonly accepted fact that the GPX 5000 represents the state of the art. It has been the same pattern with every model going back to the SD2100. I admit I used to hold off but quite some time ago I learned that when a new Minelab came out I should just get it ASAP. I actually thought this machine was going to come out two years ago because Minelab introduces new machines every two - three years, so I sold my GPX 5000 in the fall of 2012. I figured the new model would come out that winter. Shows what I know, I had to buy another GPX 5000 in the spring of 2013! Anyway, as soon as I got wind of this one I sold my GPX 5000 - again. My expectation is it will cost a lot and people will be skeptical and hold off. My plan is to have a GPZ 7000 in my hands for as many hours as I can this year. In fact my goal is to set a new personal record for hours spent detecting in a year in 2015. My recommendation is that everyone just wait and not worry about it and I will get back to you about the 40% thing this fall. Or maybe next spring! I honestly am not going to worry about it myself as it is what I am committed to using and it is going to find what it is going to find. No doubt like every detector I have ever used something else may have found whatever it is also. I could just have kept swinging my GPX 5000 this summer and been just fine. The holes I am digging are deep enough, thank you very much! But I have never yet regretted upgrading to a newer model Minelab. Not once. I am betting I do not regret this upgrade either.

Well, I guess I got my wish. Here is a copy of my post from October 17, 2012 at http://forums.nuggethunting.com/index.php?/topic/9655-minelab-ctx-5000/ "I have a Minelab GPX 5000 and a Minelab CTX 3030. I am a firm believer at this point that the GPX 5000 has taken PI nugget detecting technology about as far as it can go, with only better ferrous discrimination the only thing to offer me. And I am not holding my breath for that. So where to go from here? Pretty obvious I would say. Cram the GPX 5000 into the CTX 3030 package. I see no reason why it can't be done. The only limitation would likely be battery time per charge but if a CTX style battery could get me just a half day operation I am fine with changing batteries at lunch. A GPX 5000 is a single package with built-in speaker and GPS and waterproof to 10 feet would be killer. A new coil set mimicing the CTX set would be great as new waterproof coils would be a must. 8" mono, 11" (or 12") mono and 11" (or 12") DD and 18" mono would be all I would ever need. People are already using the GPX for beach and relic hunting and this would put it over the top. I would be using it for almost any detecting at all except where discrimination is a must, like turf hunting in a park."

Here it is...

Cat's out of the bag now - Miners Den has it on their website http://www.minersden.com.au/

Hi Merton, An original complaint I had with the FORS Gold was that the scuff covers were paper thin. I mentioned it, and through the magic of listening to customers they were almost immediately reformulated to be thicker and tougher. I will vouch for the new scuff covers - I doubt many people will have issues with them. These are the new covers I was sent.

So JP, any more news about your CTX 3030? I have been staying near home this last month, writing and selling used detectors. I am heading to New Orleans in a week for the Minelab Conference. I have not had any time yet to get my CTX out in the field looking for gold. My real prospecting will start in March. Some Details on Find Made in Video CTX 3030 Finds Gold Near Palmer River, Australia

I have too many detectors Tom, so I can't afford new trucks! I bought that 1998 used with 50,000 miles on it around 2005 and drove it up until I moved to Reno. I replaced it with another used 4-Runner.

I thought Minelab did not advertise in the ICMJ? Dealer ad? But then dealer would have to have advance info. Interesting. The original Arizona post is on Bills forum at http://www.nuggetshooter.ipbhost.com/index.php?&showtopic=28257 Wonder if Scott minds if we post copies of ads? Hope my issue shows up soon!

I spent a couple months in Alaska prospecting for gold in the summer of 2014. That adventure was chronicled as it happened here on the forum at Steve's 2014 Alaska Gold Adventure. It was a great trip and a great adventure, but when I told it I relayed the fact that it was actually part two of the story. Part one happened in 2013 and for reasons you will now discover I kept quiet about it until now. Those interested in the logistics of making the trip to Alaska and details on where I stayed, etc. will find all that covered in the 2014 story so I will not repeat that stuff here. 2013 was a momentous year for me. My business partner and I had sold the business we started together in 1976 to our employees in 2010. My partner immediately retired but I stayed on a few years to oversee the transition. Things seemed to be going well enough that I announced my retirement to take place in the spring of 2013. My wife and I had purchased a new home in Reno, Nevada and so plans were made to sell our home in Alaska and move south. At the same time, some partners and I had acquired some mining claims on Jack Wade Creek in the Fortymile country near Chicken. Alaska. My plan was to move my wife south then spend the summer gold dredging with my brother. The disaster struck. I screwed up the paperwork and the claims were lost. That mess was described online at Making Lemonade Out of Lemons and I even wrote an article for the ICMJ about it. I was not to be deterred however and made plans instead to go metal detecting for the summer. Unfortunately, my brother also had a change of plans and so was unable to make the trip with me. Just as well as I ended up having my hands full. The house sale was in progress and time running out so I boxed and palleted everything we wanted to keep and shipped it south. Then I loaded my wife and dogs up in the car and drove them to Reno. Next I flew back to Alaska and had a last big garage sale. I sold everything I could by the afternoon and out a FREE sign on what was left. Worked great - the house was empty, I cleaned it up, and pretty much left it to the realtors at that point. Finally, on June 16th I jumped in my fully loaded truck and headed for the Fortymile! On the way up just past the town of Palmer on the way to the town of Glenallen you pass Sheep Mountain in the Talkeetna Mountains. It is a very colorful, mineralized peak and it was a beautiful sunny day so I stopped and took this photo. Sheep Mountain, Alaska From the USGS ARDF file at http://mrdata.usgs.gov/ardf/show-ardf.php?ardf_num=AN080 Early Jurassic greenstone and minor interbedded sandstone and shale is intruded by numerous mafic dikes and at least one body of unmineralized Jurassic granite. Greenstone has been hydrothermally altered and contains at least 6 separate gypsiferous deposits in altered zones along joints and shear zones. Deposits composed of pods and stringers of gypsum, quartz, alunite, kaolin minerals, pyrite and serpentine minerals (Eckhart, 1953). The gypsum-bearing material averages 25 to 30 percent gypsum, with a maximum of 50 percent. In addition also reported from same general area are: (1) small irregular quartz-calcite-epidote veins in greenstone containing chalcopyrite, malachite, azurite and possibly bornite and chalcocite (Berg and Cobb, 1967); (2) disseminated chalcopyrite in greenstone over 5 ft thick zone subparallel to bedding (Martin and Mertie, 1914); (3) trace gold in samples of pyritic greenstone (Berg and Cobb, 1967); and (4) minor anomalous concentrations of copper and gold associated with some of the alteration zones and nearby veins (MacKevett and Holloway, 1977). Large area of south flank of Sheep Mountain is stained dark red from oxidation of pyrite in greenstone (Berg and Cobb, 1967). Oxidation of Cu minerals. The gypsiferous material averages 25 to 30 percent gypsum, with a maximum of 50 percent. The six deposits indicated and inferred reserves contain about 659,000 short tons of gypsum material, of which about 50 tons of this material had been mined (Eckhart, 1953). In addition, about 55 tons of clay was mined for the manufacture of fire brick and boiler lining. Samples of pyritic greenstone assayed trace gold (Berg and Cobb, 1967), and nearby veins in alteration zones show concentrations of copper and gold (MacKevett and Holloway, 1977). We did a talk radio show for many, many years at our company. The latest of several "radio personalities" to work with us on the show was Kurt Haider. He had expressed an interest in metal detecting so I invited him up to look for gold. I met him along the way just before we got to Glenallen and headed on to Tok for a bite to eat at Fast Eddie's. Then on to Chicken and finally Walker Fork Campground by evening. This is a very nice, well maintained BLM campground at the mouth of Jack Wade Creek where it dumps into the Walker Fork of the Fortymile River. The campground hosts this summer were a very nice couple named Pat and Sandy. Walker Fork Campground Steve's Camp at Walker Fork Campground The next morning Kurt and I ran up the creek to find Bernie and Chris Pendergast. They were spending the summer camped along Jack Wade Creek prospecting and I was anxious to see how they had been doing. Not bad, they already had over an ounce of gold found before we arrived, and that got Kurt and I all fired up to go look for gold. I had told Kurt, a total newbie, that I had a sure thing. We were going to hit a bedrock area I had detected the previous summer and where I had found a lot of nice fat little nuggets. There was rubble and little piles of dirt, and I thought all it would take is moving the rubble and dirt aside and we were sure to find gold I had missed. We got started after lunch on a steep slope where it was easy to just rake material off and then check with a detector. Kurt Looking For Gold With White's MXT Pro The location turned out to not be very good, but Kurt did manage to find one little nugget, his first ever. He was real happy about that! We did not work at it all that long though with the late start, and Chris and Bernie had invited us over for moose stew. Chris is a fantastic cook so we enjoyed both the stew and a DVD packed full of Ganes Creek photos from the couples adventures there. Finally we called it a night and headed back to our camp. Now time to get serious! Kurt and I grabbed the picks and rakes and spent the whole day tearing into some berms left behind by the miners bulldozers on the bedrock bench area. I just knew we were going to find gold for sure. We would both do hard labor for awhile, then I would put Kurt on the ground with my Gold Bug 2. Working Bedrock With the Gold Bug 2 We worked a couple hours. Nothing. No big deal, just need to move a little more. Nothing. More digging and scraping. Nothing! I would have bet $100 we were not only going to find gold there but do pretty well. The spot had produced quite a few nuggets before and I had refused to believe we couple possibly had cleaned it out. But by the end of the day it was a total bust. We finally just wandered around a bit detecting and I lucked into a little 3 grain nugget. What a letdown. No big deal for me but I was really wanting Kurt to do well and this was not working out anything like I had thought it would. The next and last day for Kurt we decided to hook up with Bernie and just give it a go like we normally do. And that means hitting the bushes and tailing piles wandering around looking for gold. Kurt had his MXT Pro and Bernie and I our GPX 5000 detectors, so we had a horsepower advantage for sure. Still, I was hopeful as we put Kurt on the best spot that Bernie knew of from his extra time before us. Bernie Pendergast and His Trusty Minelab GPX 5000 Very first beep, Bernie digs up a 3 pennyweight nugget! Yeehaw, we are going to find gold!! We all hunt away, with Bernie and I checking in with Kurt periodically. Kurt, it seems, just was not destined to have any beginners luck at all; Bernie and I each found a couple 1-2 gram nuggets by the end of the day but Kurt came up dry. I was feeling kind of bummed out but Kurt insisted he was having a huge adventure, and come to find out he rarely ever got out of town at all, so this really was a big adventure for him. I just wish he could have found more gold, but he was up early and headed back to town the next morning. I was on my own now, so I rigged my GPX 5000 up with my Nugget Finder 16" mono coil and hit the tailing piles. All day. For no gold. However, just by myself that is really no big deal at all. It happens all the time and I do not think anything of it. If anything, the pressure was off trying to help a friend find gold, so it was a relaxing day wandering around. Saturday, June 22 started out sunny with a few clouds. There were some tailing piles across the creek I had been wanting to detect. I had hit them a bit the year before and just dug trash, but had not put in more than a couple hours at it. Still, they looked real good and I had been thinking about them all winter and decided it was time to give them a go. I started out with my GPX 5000 but immediately got into some old rusted metal, like decomposed and shredded can fragments. I just was not in the mood for it that morning, so went back to the truck and got out my Fisher F75. The F75 had done well for me in the past hunting trashy tailing piles and was along on the trip for that reason. I got near the top of the pile with the F75 and on getting a signal looked down and saw a dig hole full of leaves. I try to recover all my trash and get frustrated when I find holes with junk in them. The signal though was flaky, not a distinct trash signal, so I figured I may as well see what the other person left in the hole. I gave a quick scoop with my pick, and gold pops out of the hole! I am not sure if the person was using a VLF and the specimen gave a trash signal, so they left it after half digging it, or maybe they were using a Minelab, and the signal just sounded "too big" so they left it for trash. Too big indeed, they walked away from a 2.37 ounce gold specimen! To say I was stunned would be a vast understatement. The trip had only just begun. The best part of all was that my expectations for the trip were very low. I had been hoping that a month of camping and detecting would get me a couple ounces of gold. That would be more than enough to cover my expenses and make a few bucks. Yet here I was on the sixth day of my trip, and I had already exceeded that amount. This was just great on several different levels, not least in pretty much taking every bit of pressure off going forward. Here is that specimen from a more detailed account of the find I told previously at Fisher F75 Strikes Gold Twice in a Row! 2.37 Ounce Gold Specimen Found With Fisher F75 Metal Detector on Jack Wade Creek, Alaska I had to take a break and go show Chris and Bernie my good fortune. Then I switched back to the GPX 5000 and got with digging everything, including all those bits of rusted cans. Funny how a nice chunk of gold changes your perspective. That, and seeing what somebody else had left behind as trash. I finished out the day finding three more nuggets, a 2.5 gram "cornflake" nugget, a 3.4 gram piece and and fat round 6.1 gram marble. First week, 2-3/4 ounce of gold, This was shaping up to be a really great adventure! To be continued...... Steve's Gold From Jack Wade Creek, First Week 2013 This post has been promoted to an article

They caught him! From http://finance.yahoo.com/news/fugitive-treasure-hunter-nabbed-florida-2-hunt-144801276.html COLUMBUS, Ohio (AP) — A treasure hunter accused of cheating his investors out of their share of one of the richest hauls in U.S. history — $50 million in gold bars and coins from a 19th-century shipwreck — was captured at an upscale Florida hotel after more than two years on the lam. Federal marshals tracked Tommy Thompson to a Hilton in West Boca Raton and arrested him Tuesday. A warrant had been issued for him in 2012 in Columbus after he failed to show up for a hearing on a lawsuit brought by some of his backers. The U.S. Marshals Service called him "one of the most intelligent fugitives ever sought" by the agency and said he relied on cash and employed other means to stay under the radar. Authorities gave no details on how they found him. Thompson, 62, made history in 1988 when he discovered the sunken SS Central America, also known as the Ship of Gold. The sidewheel steamer went down in a hurricane about 200 miles off South Carolina in 1857; 425 people drowned and tons of gold from the California Gold Rush was lost, contributing to an economic panic. In a modern-day technological feat, Thompson and his crew brought up thousands of bars and coins, much of them later sold to a gold marketing group in 2000 for about $50 million. The 161 investors who paid Thompson $12.7 million to find the ship never saw the proceeds. Two sued — a now-deceased investment firm president and the company that publishes The Columbus Dispatch newspaper and had invested about $1 million. The dispute is a civil action. No criminal charges have been filed against Thompson over the gold. Columbus attorney Rick Robol, who at one time defended Thompson's company, has said there is no proof Thompson stole anything. He said Wednesday that he has been concerned about Thompson's health, calling the arrest "the best thing that can happen for everybody." Thompson was arrested along with his longtime companion, Alison Antekeier. The pair had been paying cash for the hotel room, rented under a fake name used by Antekeier, marshals said. The hotel is in an upscale suburban area surrounded by golf courses, country clubs and gated communities. Federal marshals said that the pair had no vehicles registered in their names and that Antekeier used buses and taxis to get around. After the arrest warrant was issued, Thompson vanished from his Vero Beach, Florida, mansion, where a search found prepaid disposable cellphones and bank wraps for $10,000 in cash, along with a book titled "How to Live Your Life Invisible," according to court records. One marked page was titled: "Live your life on a cash-only basis." The couple made initial court appearances Wednesday in West Palm Beach. Authorities will seek to return Thompson to Ohio. Gil Kirk, former director of one of Thompson's companies, told The Associated Press last year that Thompson never cheated anyone. Kirk said proceeds from the sale of the gold all went to legal fees and bank loans.

From the Makro engineers: ''We also tested APTX family protocols, as mentioned in the question, it is relatively new, only some BT headsets support it. We especially prefered a “regular and all-compatible” protocol for Racer because there is no guarantee that a newer and better protocol will arise and aptx will not leave its place to new brother. In any case, Racer BT module hardware supports APTX, but not using it because of headset compatibility issues, it is ready for APTX in next generations of Racer or modules if we decide to use it.'' and "A delay in audio is of the nature of the Bluetooth audio, it always exists, the question is how long (or short to be acceptable) the delay is. A2DP and similar Bluetooth profiles provide a good (or at least acceptable) media quality sound but seems “not instant” because of the delay in signal processing and digital filtering algorithms they devise. Digital signal processing algorithms/CODECS, by their nature, require to process “the past of the sound” to improve sound quality and this causes a delay (in A2DP codecs, it is usually between 100ms-1000ms). This delay usually does not matter when the sound flow is unidirectional. In cases where “instantaneous” transfer required, such as bidirectional speech (such as hands free use of phones, handsets or similar communication equipment) Bluetooth is still able to transfer the audio signals quasi-instantaneously (shorter than 100ms delay), but with a noise that remain weakly filtered. HSP and HFP protocols are used for voice transfer, HFP is newer than HSP. The voice quality of these are acceptable for communication, furthermore for basic sound transfers. Most metal detector people try to use a “commercial media transmitters” those are designed for one way media transfer (i.e. listening music), these devices cause a significant delay that the position of a metal cannot be located successfully. A metal detector is not practical with these pluggable equipment unless they designed to use communications purpose (not media). In development of the Racer; we decided to use the HFP profile that required us dealing with the background noises. After several anti-noise improvements that took several months for reworks to implement the BT module, we succeeded to find an optimal SNR with HFP. This preference lead us to select headsets that the noise prevention combination was also optimal. Racer BT audio supports principally all BT headsets, but not all are not tested. That is why we strongly suggest Nokta/Makro supplied headset instead of cheap products or media optimized HQ headsets. Briefly; The delay (lag) of audio from bluetooth of Racer is below 100mS (typically under 50ms, 1/20 of a second), and this is not predictable by the user. Here, I have to include the information that the BT module is a module level design and is an option for Racer, but this is not a plugged third party BT device or a card from such a device. It contains an audio proven and ECC certified programmable audio BT module inside which is solely designed for this purpose, not different very much than using an integrated circuit which have an antenna. The purpose of BT in Racer is transferring the audio as fast and noiseless as possible to a BT headphone. B. Kutlu YAVAS''