Badger-NH Posted January 16, 2023 Share Posted January 16, 2023 Make sure tracking GB is turned off. My 800 was acting up for months before I noticed that I had left tracking on. Now it runs perfectly quiet. 1 1 Link to comment Share on other sites More sharing options...
midalake Posted January 16, 2023 Share Posted January 16, 2023 27 minutes ago, Badger-NH said: Make sure tracking GB is turned off. My 800 was acting up for months before I noticed that I had left tracking on. Now it runs perfectly quiet. I always use tracking GB. This from the manual> Contents Tracking Ground Balance When Tracking Ground Balance is active, the detector continuously adjusts the Ground Balance automatically during detecting. This ensures that Ground Balance is always set correctly. Tracking Ground Balance is the default and recommended method for Gold Mode. Tracking Ground Balance can also be useful when using Beach Mode 2 underwater at the beach (in salt water). 1 Link to comment Share on other sites More sharing options...
Jeff McClendon Posted January 16, 2023 Share Posted January 16, 2023 4 hours ago, midalake said: I always use tracking GB. This from the manual> Contents Tracking Ground Balance When Tracking Ground Balance is active, the detector continuously adjusts the Ground Balance automatically during detecting. This ensures that Ground Balance is always set correctly. Tracking Ground Balance is the default and recommended method for Gold Mode. Tracking Ground Balance can also be useful when using Beach Mode 2 underwater at the beach (in salt water). There seems to be the word "always" in this post. I use tracking ground balance when I need to which is very rare. Tracking ground balance is a default setting for the gold modes. At least where I do detector gold nugget prospecting, using tracking ground balance is a total nightmare. So, I would recommend that any North American based Equinox user think very carefully about "always" using tracking ground balance or 0 for their ground balance setting and instead find out what your ground is telling you and not what the manual (written by people from another planet, oops I mean continent) or what someone else is telling you. 2 1 Link to comment Share on other sites More sharing options...
midalake Posted January 16, 2023 Share Posted January 16, 2023 18 hours ago, Gary985112 said: Like i notice at 4 its a bit chatty in the water, but recovery 6 is less chatty? is this a thing? It is for me. I run 6. 1 Link to comment Share on other sites More sharing options...
Badger-NH Posted January 16, 2023 Share Posted January 16, 2023 8 hours ago, midalake said: I always use tracking GB. This from the manual> Contents Tracking Ground Balance When Tracking Ground Balance is active, the detector continuously adjusts the Ground Balance automatically during detecting. This ensures that Ground Balance is always set correctly. Tracking Ground Balance is the default and recommended method for Gold Mode. Tracking Ground Balance can also be useful when using Beach Mode 2 underwater at the beach (in salt water). The manual only recommends using Tracking GB in the Gold Modes and Beach Mode 2 in saltwater. That's because places with gold nuggets are often highly mineralized and saltwater usually has high salt content. In low to moderate mineralization, all the modes will be quieter without Tracking. Link to comment Share on other sites More sharing options...
midalake Posted January 17, 2023 Share Posted January 17, 2023 5 minutes ago, Badger-NH said: In low mineralization, all the modes will be quieter without Tracking If one is using tracking GB on low mineralized ground. How is it possible to make more noise? Is there some youtube vids that show this? I do not understand. Link to comment Share on other sites More sharing options...
Badger-NH Posted January 17, 2023 Share Posted January 17, 2023 7 minutes ago, midalake said: If one is using tracking GB on low mineralized ground. How is it possible to make more noise? Is there some youtube vids that show this? I do not understand. I don't understand it either, but I've proven it with my machine. Maybe it quiets down in mineralization when the tracking is more active. Link to comment Share on other sites More sharing options...
Steve Herschbach Posted January 17, 2023 Share Posted January 17, 2023 I almost never use the ground tracking, was not impressed at all by how it tracked in bad ground. Link to comment Share on other sites More sharing options...
Jeff McClendon Posted January 17, 2023 Share Posted January 17, 2023 In moderate to high mineralization either on dirt or beaches, I have found that automatic ground balance tracking simply can't keep up. I would rather do a ground grab several times during a hunt on changing ground than listen to siren like sounds every time I am unable to execute the perfect swing or when I encounter yet another odd ball hot rock or suddenly hot ground. I have used auto ground balance tracking at some east coast USA beaches and when using Beach 2 submerged but I performed a ground grab periodically. On some of the west coast USA beaches I have hunted........I turned auto ground balance tracking off pretty soon after trying it....it could not keep up with the changing salinity and magnetite concentrations even using Beach 2. Just my experiences. Not issuing an edict here. I'm just hoping people experiment and find out what works for them individually. 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now