fred ned gold Posted May 21, 2017 Share Posted May 21, 2017 I was wondering apart from size what are the trade offs or avantages for using the different size coils or there going to sense just the same With area covered to being able to fit in tighter places Link to comment Share on other sites More sharing options...
Steve Herschbach Posted May 21, 2017 Author Share Posted May 21, 2017 5 hours ago, fred ned gold said: I was wondering apart from size what are the trade offs or avantages for using the different size coils or there going to sense just the same With area covered to being able to fit in tighter places Just the typical trade off seen with any similar machines. The small coil "sees" less ground and so can be run at a slightly higher sensitivity level in bad ground, and with a more concentrated magnetic field. This in turn results in a bit hotter response to small gold than with the larger coil, but the difference is small. The large coil on the other hand does produce a larger magnetic field and so will reach a deeper on larger nuggets. Big coils not only "see" more ground but they see the unwanted targets in the ground that can confuse the detector, like trash items or hot rocks. By "seeing" a smaller volume small coils are less likely to see multiple targets at once, resulting in cleaner signals, plus better discrimination results when discrimination is employed. Obviously the big coil covers twice the ground while the smaller coil gets into tighter locations. Which you want to use just depends on the job at hand and since both come with the detector there is no need to force the choice. Rough rules of thumb - smaller gold or smaller areas to cover equals smaller coils. Larger gold, larger areas to cover equals larger coils. 1 Link to comment Share on other sites More sharing options...
fred ned gold Posted May 21, 2017 Share Posted May 21, 2017 Thanks for sharing your information and insight Link to comment Share on other sites More sharing options...
Sourdough Scott Posted July 29, 2017 Share Posted July 29, 2017 Anyone learning the Gold Monster, this is a must read article by JP. 2 Link to comment Share on other sites More sharing options...
Norvic Posted July 29, 2017 Share Posted July 29, 2017 You`ll note in JPs directions to turn on the GM with the coil facing likely EMI source to allow the noise cancel to operate correctly, this is very important. I mention this as one of the videos making the rounds show the turn on done with the coil on the ground. The GM1000 is no toy for sure. 4 Link to comment Share on other sites More sharing options...
Northeast Posted July 31, 2017 Share Posted July 31, 2017 From Youtube. One of the better vids kicking around. I wasn't sure where to post this but here seems as good as anywhere. In the vid it mentions that auto sensitivity utilises the sensitivity settings 1 to 6. I hadn't heard that before - maybe I missed it? Is it correct or an assumption? Thanks, Adam. 1 Link to comment Share on other sites More sharing options...
Northeast Posted July 31, 2017 Share Posted July 31, 2017 Don't worry, went back and re-read the sensitivity treasure talk. Answered my own question. In Auto+, the detector still chooses the best equivalent of the 10 available manual settings and Where Manual 10 is the maximum level that can be user selected, the auto level selected mayrange above 10 if the ambient and ground conditions allow, giving a greater sensitivity than manual will ever be able to achieve. Senility may be creeping up on me 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now