normmcq Posted September 13, 2017 Share Posted September 13, 2017 With several GPZs working in a small area, is there a recommended auto tune procedure to tune each other out? Norm 1 Link to comment Share on other sites More sharing options...
mn90403 Posted September 14, 2017 Share Posted September 14, 2017 Norm, There is never enough gold in a patch for several GPZs. You are good at solo hunting. Don't share your patches! Mitchel 1 Link to comment Share on other sites More sharing options...
Steve Herschbach Posted September 14, 2017 Share Posted September 14, 2017 First person fires up. Next person nearby fires up, aims coil at other person, does auto tune routine. A third person or more might be added to the chain, but at that point the group might have to do manual tweaking of the frequency to be sure everyone is offset. Link to comment Share on other sites More sharing options...
fredmason Posted September 14, 2017 Share Posted September 14, 2017 That is the way I would do it...fred Link to comment Share on other sites More sharing options...
normmcq Posted September 15, 2017 Author Share Posted September 15, 2017 I too like to be a lone wolf. I did participate in a push a couple of years ago with several detectors on a 150 x 300 foot area. Not an easy deal getting all the detectors to cooperate with each other. Just hoping there might be an other opportunity to test out a better way. Norm 1 Link to comment Share on other sites More sharing options...
Jonathan Porter Posted November 17, 2017 Share Posted November 17, 2017 On 9/14/2017 at 2:27 AM, normmcq said: With several GPZs working in a small area, is there a recommended auto tune procedure to tune each other out? Norm Interference from a GPZ's Tx is easily dealt with as mentioned by Steve above, however the biggest issue I have found is interference from Wi-Stream, the interference sounds like a rapid buzzing noise that is hard to identify and can be heard from a lot further away than the regular Tx/Rx if there is a direct line of sight to another GPZ operator. To fix you need to manually select another channel through the Connect WM12 menu option of the GPZ, this can be a bit hit and miss because there is no scan function. Best bet is to ask the other operator what channel they are working on then you selecting a different channel. JP 1 1 Link to comment Share on other sites More sharing options...
Steve Herschbach Posted November 17, 2017 Share Posted November 17, 2017 Brilliant JP - I never thought about the fact that detectors that use wireless headphones might interfere with each other if on the same channel. Something to be aware of as more and more detectors go to wireless audio. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now