kac Posted October 14, 2019 Share Posted October 14, 2019 Hitting some the spots near where I found an old spill can came across this about 7" down. Usually don't dig iron but thoughts of a jar full of old coins crossed my mind. Old hunting trap, might do some reverse electrolysis to see if there are any makers markings on it as a clue for a date. There was a foundation nearby that looked like poured concrete so not sure the period it was made. Building might have been a garage or chicken coupe maybe, hard to tell. Nails around are all square with rounded tops. 1 Link to comment Share on other sites More sharing options...
geof_junk Posted October 14, 2019 Share Posted October 14, 2019 While detecting in West Australia for gold I found this trap under some cap rock it was deep and I had to uses a pick for over an hour to break through the rock thinking it was a million dollar nugget. A goanna had tunnelled many feet under the cap rock. He must off caught him self in a dingo trap and dragged it back to his lair and died. By the way that not me its a friend who was a full time prospector. 2 Link to comment Share on other sites More sharing options...
RIIID Posted October 14, 2019 Share Posted October 14, 2019 That is what is called a "jump" trap, very common but out of production as far as I know. They were made by several manufacturers in sizes #1-#3, I used them back in the '70's. That one looks beyond use, heavily rusted. Rich 2 Link to comment Share on other sites More sharing options...
kac Posted November 25, 2019 Author Share Posted November 25, 2019 I cleaned it up some but my rectifier doesn't have enough amps to get all the crud off. The spring still works! You have an idea how old it might be? Rivets on the bottom are round like a screw top. Thanks 1 Link to comment Share on other sites More sharing options...
fredmason Posted November 25, 2019 Share Posted November 25, 2019 appears to be a single spring Fox trap....made before the 1/4 inch offset was required by most states that have that requirement... you could look that date up for your state... I am guessing 60 years or more.... fred 2 Link to comment Share on other sites More sharing options...
MCH2 Posted November 26, 2019 Share Posted November 26, 2019 I could give you a better estimate to it's age if you cleaned it up further. Try using a stiff nylon or better yet a brass wire brush on it. I can safely say you will not be ruining any value by doing so with this trap in this condition. Try at least to get the pan looking better. The pan often has the brand stamped into it. It appears there is a hole (should have two) in the pan from the pic. If so, it was manufactured that way by a couple different makers to hold bait. Link to comment Share on other sites More sharing options...
kac Posted November 26, 2019 Author Share Posted November 26, 2019 I'll try a brass brush on it. Does look old by the rivets they used. It was near a foundation that was what looked like a chicken coop so fox trap is probably spot on. Link to comment Share on other sites More sharing options...
RIIID Posted November 26, 2019 Share Posted November 26, 2019 A photo of the bottom and the chain can help with the id/date. Rich Link to comment Share on other sites More sharing options...
MCH2 Posted November 26, 2019 Share Posted November 26, 2019 On 10/14/2019 at 5:15 AM, geof_junk said: While detecting in West Australia for gold I found this trap under some cap rock it was deep and I had to uses a pick for over an hour to break through the rock thinking it was a million dollar nugget. A goanna had tunnelled many feet under the cap rock. He must off caught him self in a dingo trap and dragged it back to his lair and died. By the way that not me its a friend who was a full time prospector. That appears to be a hand-forged trap of considerable age. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now