Joe Beechnut OBN Posted August 24, 2020 Share Posted August 24, 2020 10 hours ago, Willy said: Headphone connector --> same connector as coil connector but in plastic, will be located at the back of the enclosure in parallel with the coil connector I would suppose there will be a choice between 8" and 12.5" but not sure, I am not in the decision circles What I already know is that the 8" coil will be an option. 4 x 18650 battery cells. Can not tell about autonomy at this point. Thanks Willy for sharing. Souriau connector for the head phones? Link to comment Share on other sites More sharing options...
okara gold Posted August 25, 2020 Share Posted August 25, 2020 I would gladly pay more for a coil connector at the pod; that doesn't "sound off" when its entering the salt water or waves hitting it. Been there with the Infinium and it isn't fun. 1 Link to comment Share on other sites More sharing options...
Willy Posted August 25, 2020 Share Posted August 25, 2020 7 hours ago, Joe Beechnut OBN said: As crazy as it may sound...I can see someone putting the batteries in backwards...⚡ I've had one customers remove the larger O-ring I used on the excalibur endcap I sold him..and swap it out with the smaller stock O-Ring...Then installed the endcap before his island vacation......? disaster. In backward position, the button of the cell is also at the back of the cell and would not enter in the corresponding hole at the front of the shaft making the positive polarity. In any case, the BMS integrated in each cell should protect the system against putting the cells backwards. Also, we thought about people using NON-protected cells with buttons. Since they are shorter, there will not be any contact with the spring of the end cap making the negative polarity. 2 Link to comment Share on other sites More sharing options...
Willy Posted August 25, 2020 Share Posted August 25, 2020 7 hours ago, Joe Beechnut OBN said: Thanks Willy for sharing. Souriau connector for the head phones? Probably, the same as the one used as coil connector on the LTD. (TE Connectivity) 1 Link to comment Share on other sites More sharing options...
jimpugh Posted August 26, 2020 Share Posted August 26, 2020 kinda looks like this was watching the video on Farnell of the UK another supplyer and they were interchangeable with the other connectors like metal jam nut receptacle neat concept Happy Trails jimpugh Link to comment Share on other sites More sharing options...
Joe Beechnut OBN Posted August 26, 2020 Share Posted August 26, 2020 9 hours ago, jimpugh said: kinda looks like this was watching the video on Farnell of the UK another supplyer and they were interchangeable with the other connectors like metal jam nut receptacle neat concept Happy Trails jimpugh I used the same but a 4 pin Souriau on my excalibur for a few years (2014-2016), worked fine but in time the nubs wore down on the male panel connector which I used for the endcap. See if I can find the picture. I never mentioned this since the AQ has the exact same. But I was changing coils regularly on the excalibur. I did try several others before, then settles on a 3M SS fittings and still in use today on one of my excals, My opinion hardwired is best for all around performance on coils. If for headphones, SS ONLY. M-12 2 Link to comment Share on other sites More sharing options...
jimpugh Posted August 26, 2020 Share Posted August 26, 2020 Joe you Sure Do Awesome Work trying to keep them old Xcals in the herd i agree I use the SunRay 12 inch and hard wire only way to go On Any work Horse in Serious Salt Water Artifact Recovery.....I have a few old dealers that keep thier eye out for choice specimens .....I currently have 2 .....plus ...A Wot ...(Wild Orange Thing).... I can only swing that monster for three or 4 hours but find gold every time I do ...recovery is the take deep breath and go down under water give it a few good kicks ...It is a Original Soverign that I put in an old Garrett VLF/TR case ...I reverse engineered the front board and hand wired the board (main Board) to with the controls I wanted.....not pretty but pressure tested in my tank to over 200 feet ...the original Soverigh had the super loud Audio for divers that the original golden Swords used more out put transistors than Blue label and current unit. I have two golden swords and have kept one going for years with hairlines I have figured out how to repair ...the horse shoe coil is never been opened....Storm sent me the Proto and I told them the problems to fix crosstalk on the board is the major one On board they fixed the other was paddle affect which they did not fix so I turned mine sideways and made farious strait handles out of marine grade aluminum The pic with 12 inch SunRay is painted serial number 217 only the seven is left since I have cleaned this board many times and kept her Rocking And some times knocking on heavens Door The other picture is the Soverghn in a box and my first real water detector that still works great I personally told Charlie that was the best Detector he ever made He just agreed ...smiled and shook my hand like a man that he is.... Happy Trails jimpugh Ps So many detectors so many creative thoughts to little time just want kick my shovel and drink a little salt water with my gold it’s every where right under your feet ... I just use the other detectors to scout ....the PI gets the real real Deep gold once I stake my claim..... 2 Link to comment Share on other sites More sharing options...
midalake Posted August 27, 2020 Share Posted August 27, 2020 Clean-up on Aisle 9!!!!!!!!!!!!!!??? 6 hours ago, jimpugh said: The other picture is the Soverghn in a box and my first real water detector that still works great I personally told Charlie that was the best Detector he ever made He just agreed I really like the Sovereign!!! Sovereign in a box, even better! 1 1 Link to comment Share on other sites More sharing options...
Joe D. Posted September 8, 2020 Share Posted September 8, 2020 What type of materal are the seals and O-Rings?? Salt water is rough on many rubber compounds! That may be one of the problems with some of the other submersible detectors on the market right now!!?? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now