Popular Post F350Platinum Posted May 24, 2023 Popular Post Share Posted May 24, 2023 I would normally post this in jewelry or coins and relics, but I think the D2 forum is best because I'm testing V1 and a program that I got from @ColonelDan. It's based on Beach Sensitive and it's really good but still in the testing stage due to the V1 update. I first tried it at my small beach but because it's not after Memorial Day I got totally skunked, just some junk. I felt as though I could rely on this program however. Today I went to a larger beach about an hour from my house eager to try the program. I had been fooling around with a Beach sensitive program of my own, but this one seemed better as it doesn't use any filters at all for the most part. This beach is in strong contrast to my little one, the little one has pure white sand with a little black sand mixed in, this one is pebbly and coarse in some places, and others it has red clay mixed in. Got out there pretty early, and my first target is possibly gold. It's a small bezel that was probably on a watch. Got some coins and Hot Wheels, the usual stuff, one of the big things this program does is to make coins stand out and skip many pull tabs. It did its job. I was poking around a palm tree, and got a really nice 93 ID and tone, and to my surprise dug this 1916 Mercury Dime! It's not a D or an S, I was shocked but really shouldn't be, I've found other really out of place coins here. It was probably brought in with the sand. It's all brown and trashed but still silver. Here's the total haul today, not bad, and thanks go to Colonel Dan for his program. I used it beside Relic Reaper even in the wet, and I was impressed at its solid coin IDs. I used the Reaper to check anything that "pipped" in the notches, and even scored 4 nickels. And here's the trash: A few bits of pull tabs that were outside the notch ranges, some whole ones that were also below, and lots of tiny metal bits. Otherwise the same old same old, just well... Better. ? Nice beach day overall! I'm fine with the update, nothing degraded or incorrect in my opinion. 14 Link to comment Share on other sites More sharing options...
ColonelDan Posted May 24, 2023 Share Posted May 24, 2023 Glad you, found those settings useful and thanks for giving it a run on a beach other than Florida's east coast. I'm still tweaking it based on V1 parameters. ? 4 Link to comment Share on other sites More sharing options...
Ogliuga Posted May 24, 2023 Share Posted May 24, 2023 Really nice hunt and glad you like V1.0 update! ? 1 Link to comment Share on other sites More sharing options...
F350Platinum Posted May 24, 2023 Author Share Posted May 24, 2023 40 minutes ago, Ogliuga said: Really nice hunt and glad you like V1.0 update! ? Thanks Ogliuga, I think that since so much has changed with the operation of the D2, we all need to take a step back and focus on what we need to do to get the most out of the new settings. These were logical and well-considered changes for the most part, and the time it took to get them right was considerable. It took me a year to get comfortable and confident with the previous version, so why would I think updating and adding features would make me able to walk right out the door and find more gold? But that is exactly what happened. In 3 hunts (two short, one long) I have found two gold objects. ? I have no idea why, but for sure the D2 is finding me more. Gold. We should all get together here and take an objective look, and I think that is happening. I am pretty confident that anything I'm missing from V0.71 is still there, it's just a matter of finding it or tweaking some of the new defaults to bring it back, if that is even necessary. Only time well tell, same as it ever was. I am sad that our prospecting friends are disappointed that XP did not fully address their needs, as I see it the Deus 2 was intended to be more of a beach and relic machine anyway. I've written it before that if Swiss Army knives have too many blades and gadgets, they become too cumbersome to use. The D1 and ORX both seem to be more geared to relics, coin shooting and prospecting, and they still make and sell them. All I ever asked for was a 10x5 elliptical. ? 3 Link to comment Share on other sites More sharing options...
F350Platinum Posted May 24, 2023 Author Share Posted May 24, 2023 4 hours ago, ColonelDan said: Glad you, found those settings useful and thanks for giving it a run on a beach other than Florida's east coast. I'm still tweaking it based on V1 parameters. ? Thanks Colonel, I'm always willing to take a fresh look at my machine. I think you may be on to something. ? Memorial Day is coming ?? ✝️ and after that somber remembrance we need to hit the beaches like Normandy ? right now the pickin's are slim. 3 Link to comment Share on other sites More sharing options...
ColonelDan Posted May 24, 2023 Share Posted May 24, 2023 1 hour ago, F350Platinum said: Thanks Colonel, I'm always willing to take a fresh look at my machine. I think you may be on to something. ? Memorial Day is coming ?? ✝️ and after that somber remembrance we need to hit the beaches like Normandy ? right now the pickin's are slim. Florida beaches are very humid today…more so than normal but I got a few hours in to included some verification testing. I’ll be in touch. 3 Link to comment Share on other sites More sharing options...
Ogliuga Posted May 24, 2023 Share Posted May 24, 2023 Yes, I agree with you. I think that, talking about V1.0, we need to study and understand. I agree also with your words “need to take a step back and focus on what we need to do to get the most out of the new settings” . That’s what I think, we have to test and understand new settings for different types of hunt. ? 2 Link to comment Share on other sites More sharing options...
CPT_GhostLight Posted May 24, 2023 Share Posted May 24, 2023 Congrats on the gold and silver, F350, well done! And thanks for the beach reports from you and the Colonel. I'm very keen to hit a beach this year as my D2 has never seen sand. ? Besides what you found, I also noticed what you didn't find, which was a ton of pull tabs or iron. That looks like a good sign. I also went back to the drawing board to rein in my settings. I got lucky the first few times out, but got my but kicked the third time out from having my settings way too agressive. It seems less is more with V1.0, but even digging iron and tabs is teaching me something more, so back to the lessons. ? 2 Link to comment Share on other sites More sharing options...
F350Platinum Posted May 24, 2023 Author Share Posted May 24, 2023 5 hours ago, CPT_GhostLight said: Congrats on the gold and silver, F350, well done! And thanks for the beach reports from you and the Colonel. I'm very keen to hit a beach this year as my D2 has never seen sand. ? Besides what you found, I also noticed what you didn't find, which was a ton of pull tabs or iron. That looks like a good sign. I also went back to the drawing board to rein in my settings. I got lucky the first few times out, but got my but kicked the third time out from having my settings way too agressive. It seems less is more with V1.0, but even digging iron and tabs is teaching me something more, so back to the lessons. ? Thanks Cap'n, Iron was easy to dodge with the program, and when in doubt I switched to Relic Reaper to be sure. Pull tabs were a different story, the pieces were lower tones in the 50s so I dug them. Gotta figure out how to get that up/down tone in RR back, might be audio filter. ? 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now