Minelab SDC 2300 Field Recharging of "C" Cell Batteries

[~LARGO~]

Thanks, Ken for your comments! 

I know our comments are sometimes like whistling in the wind, BUT people are paying attention to what we say, especially on this forum, as it is a non-dealer run site.  Thanks to Steve Herschbach, for making the forum available as always.

I think that when the new SDC 2300 kinks are worked out, Minelab may see the light and provide a means for field charging.  But something tells me there is a reason why there has not been, given the bright minds that design the Minelab metal detectors.  I can't imagine that it was an oversight.

As discussed in other posts, (thanks, Steve)  there IS a headphone adapter being made available.  A little pricey, IMO, but it does have a very special ball locking connector on one end that is not a normal over the counter part.  I am a little surprised that someone on this side of the pond has not jumped on to that opportunity.  Add to that a means to keep the machine from tipping over when it is set on the ground on less than level surfaces.  A simple add on there could be made, as well as a way to deal with the arm rest closing on your arm when it is on fire...  (anyone paying attention?) ;-)  

Gary 

[Steve Herschbach]

Well after a lot of looking I would say that off the shelf chargers that offer a 12v option without use of an inverter are few and far between. Chris and I both used 12v auto adapters on the charger we have and both blew fuses. We got one hotwired to work but obviously the chargers are drawing more than normally intended off a 12v outlet. I think the safest route at this time is to use an inverter off 12v. My 14w inverter seems to run my charger just fine and so that is the way I am going for now.

Minelab does not make everything and it looks to me like they are just having a hard time sourcing a good charger option that includes 12v. But I totally agree that this should have been figured out well before the unit going to market, same as a headphone adapter or even underwater phones for that matter.

Seriously though, going forward I doubt there will be many times when I will need anything other than a couple sets of spare batteries to get me by. That is a good three days of detecting before having to worry about charging issues.

[~LARGO~]

I have 12 rechargeables in the 5000 mHa range, plus some throw away batteries for a few days.  I have looked at quite a few solar possibilities, but for a person of limited electrical experience, it would be folly for me to throw more dollars at a system I know little about.  I may chat with a local fellow that is big into solar, maybe he can tell me what I need to know about set up needs for outback battery recharging.  Hope to get down south to my old patches soon.  Chris knows where a couple of them are...  ;-)  

Thanks!

Gary   

[Ken Walls]

   I agree with the tipping issue, I know it wont hurt the machine, but im alittle anal when it comes to my equipment. I dont want it getting scratched up or muddy if I can help it. The Garrett ATX is the same, it wont tip, but it does sit directly on the ground. 

I have fit little rubber legs that I bought at True Value Hardware to both machines. A dab of superglue on each leg , now at least im not setting the machines on the dirt or mud. It doesnt help the tipping issue with the SDC, but Im just careful setting it down.

I think if the SDC gets more popular, there will be more people looking into ways to help out with the little issues we dont like.

So far it seems that the SDC has not taken off like they had thought, or at least thats my view. I have not recieved one call on the SDC yet, and have not sold one yet either.