Mixed Results With Equinox 600 So Far

[Skate]

7 hours ago, Bayard said:

I was discriminating out everything 21 and below; so, I got a consistent high tone that was slightly faint.  I switched to "all metal" before digging and could hear the high tone surrounded by junk, second based on your terminology.

Cool. Thanks for the insight!

[Bayard]

Site 8: Machine was very noisy in Park 2, had to turn the sensitivity down to 18.  The only old thing I found was a key with a piece of iron also in the hole.

[Dubious]

Also interested in Bayard's question re how the dime sounded.  On my second Mercury dime with the Equinox 600, I recall I had doubts as there was some iron grunting on some swings mixed in with the high tones (this is a very trashy site with rusty nails everywhere). But, I was getting fairly consistent TID numbers in the high-conductor range, so dug. There was at least one nail, but not touching the dime.

No more silvers since then (yet), just clad and a bunch of deceptive bent rusty nails :)

[Chase Goldman]

Use the AM button and the nails will become more obvious.

[Dubious]

I am generally hunting in the discrimination mode but switch to AM when I've found a target. If indicated, I also use the wriggle-and-recede from various angles to get more information.

[Bayard]

Returned to site 4:  Etrac got me two silver dimes, a sterling crucifix, and six wheat cents.  Equinox in Park 2 then got me an additional two wheat cents.

[Dubious]

Well, you're doing just fine, with whichever machine.

[Tiftaaft]

Sounds like some great site options you have Bayard.  And I like your approach... canvassing the ground with the Etrac for keepers, then going back over with the Equinox to snag the more masked targets.  How do you like the 2 tone option on the Equinox?  Is that similar to what you are running on the Etrac? Tim.

[Bayard]

4 hours ago, Tiftaaft said:

Sounds like some great site options you have Bayard.  And I like your approach... canvassing the ground with the Etrac for keepers, then going back over with the Equinox to snag the more masked targets.  How do you like the 2 tone option on the Equinox?  Is that similar to what you are running on the Etrac? Tim.

I like the tone break at 22.  I can use it with 2 tones or 50 tones, although I've been using 2 tones.

I like it because it high tones on silver coins and low tones on nickels, much like an Etrac.  I didn't initially realize that a 600 could do this, since the 800 is promoted as having adjustable nonferrous tones; however, this is a great setup to avoid zincolns and find everything else.