Your Techniques For Trashy Tailing Piles

[Knomad]

I have been unable to locate the 1 inch by 1 inch magnets I originally used, no one seems to offer them now.

The 1 inch Diameter by 1/2 inch are available and I have some on order but have not tried them, they should work but I wonder about the pull force, so will compare the two when I can. Four 1/4 inch thick ones stacked should also work but untested as well.

I suspect several of the Websites are actually the same company based on their Website contents and layouts, the site I ordered the 1/2 in ones from was CMS Magnetics But they have slow shipping, was ordered on the 14th and may arrive tomorrow.

It's a Great more useful setup than putting a magnet on the head, Often use it before even digging to clear hot rocks and clean up signal, and if signal disappears often find small wire or tin on the cover, AND a signal may change to Non Ferrous once the hot rocks or black sand are out of target area.

Good Luck and Happy Hunting.! 

 

[MSC]

I wrap my magnets with a good electrical tape, black sand any metal are easily removed using gloves, The tape after a while starts to wear out but is easily removed and replaced. Also helps protect the neo-magnets from breaking as they a fairly brittle.