phrunt Posted August 10, 2021 Share Posted August 10, 2021 No, you can pair any atpX low latency Bluetooth stuff directly to the detector. 1 Link to comment Share on other sites More sharing options...
MSC Posted August 10, 2021 Share Posted August 10, 2021 Thanks guys ! Link to comment Share on other sites More sharing options...
F350Platinum Posted August 10, 2021 Share Posted August 10, 2021 2 hours ago, MSC said: Thanks guys ! You're welcome ? The Minelab headphones (at least the ones for the Equinox) have a reputation for being kinda cheesy. Chase Goldman recently posted a great wrap up of headphones to date that are superior or somewhat better than the ML headphones: Check it out! 1 Link to comment Share on other sites More sharing options...
MSC Posted August 10, 2021 Share Posted August 10, 2021 F350Platinum Thanks F350, trying to avoid headphones, too hot for me to wear. but I have to say, the phones that come with the 6, are the most comfortable ML phones I have tried on. 1 Link to comment Share on other sites More sharing options...
Popular Post Northeast Posted October 4, 2021 Author Popular Post Share Posted October 4, 2021 Earlier in this thread I mentioned that I had ordered an Avantree AS70 which is a small, low latency, blue tooth receiver that had a clip so it could be attached to your shirt/harness/whatever. This new version super-ceded the Clipper Pro which was no longer easily available but the AS70 hadn't been released yet - was supposed to be released within days of me ordering. Well Lily from Avantree sent me an email each month telling me release was delayed to the point I thought it was a scam. Then to my surprise I got an email to say it was ready, it has shipped and it arrived yesterday. A few pics.... As you can see it is nice and small. Put the DD coil on the GPX6 to test it at home as the DD is as quiet as a mouse inside the house. The 17" coil on the other hand is the opposite to quiet! The AS70 paired easily and got the Bluetooth Connected + signal on the GPX6 to advise it is connected with Low Latency and the AS70 showed as a solid blue light - also suggesting Low Latency. Hooked up the AS70 to both a waterproof speaker I already had and the Philips over ear, ear buds that I regularly use. The benefit of the AS70 over the Soundpeats unit (mentioned on page 3 of this thread) that I have been using is that this has a clip and has a volume control on the side so I can adjust the AS70 audio up without turning up the GPX6 audio. Connected to my ear phones. Neat, tidy and light. With the speaker on a Camel-Bak pack. With this set-up the speaker and the AS70 have volume control. This will probably be my preferred set-up heading into summer. Not yet used in the field but expecting the audio to be as good a quality or better than the Soundpeats just with the added benefit of the clip and the volume adjust. 10 Link to comment Share on other sites More sharing options...
Luis Posted October 20, 2021 Share Posted October 20, 2021 On 7/16/2021 at 1:49 AM, phrunt said: Bueno, mi Mpow llegó hoy, tengo que decir que estoy bastante impresionado. Lo compré con mi GPX 5000 en mente cuando renuncié al Pro-Sonic, no me impresionó en absoluto. Así que usé el Mpow con los auriculares Equinox para probarlo, emparejé bien en unos 5 segundos, ambos tienen una latencia baja de pX y el tiempo de respuesta con mi 4500 parecía excelente, no pude notar ningún retraso. Afirman que la batería tiene una duración de 14 horas, obviamente todavía no lo he probado. Ahora he decidido que también lo voy a usar en mi GPZ, odio los auriculares, pero los de Minelab son lo suficientemente cómodos y sería interesante probarlos, nunca los he usado porque me molestan. . Intenté hacer que el MPow se desconectara y ni una sola vez lo hice, tuve que caminar más de 6 metros desde mi detector antes de que aparecieran signos de caída, nunca se desconectó en escenarios de uso normal como lo hace el WM12. Encaja bien y fácilmente en la bolsa de mi batería Y cuando la cubierta baja, la mantiene en su lugar bien Muy fácil de usar, simplemente mueva el interruptor para convertirlo en modo de transmisión, encienda los audífonos Nox y casi instantáneamente estará apagado y funcionando. Recuerda muy bien a la pareja y se reconecta muy rápidamente. No pareció crear ninguna EMI que molestara al GPX en la bolsa de la batería, no noté ninguna diferencia con él allí y desaparecido y solo usando mi altavoz. En general, estoy muy contento con él, y era bastante barato, no puedo recordar exactamente como lo pedí hace un par de semanas directamente de Mpow, pero creo que se enviaron alrededor de $ 35 dólares australianos. A continuación, lo probaré en el GPZ y veré dónde puedo montarlo para que no obtenga ninguna EMI. Tenga en cuenta que este producto es solo un transmisor en atpX LL, no recibe su uso, por lo que es bueno que los GPX y GPZ más antiguos los conviertan en bluetooth LL, pero no si desea usarlo como receptor para el 6000. I just received mine and it does not pair with any of the headphones that I have, on the other hand with the mobile there is no problem. I have made the mistake of buying it only receiver. I have realized late Link to comment Share on other sites More sharing options...
Aureous Posted October 24, 2021 Share Posted October 24, 2021 Ive trialed 5 different sets of APTX LL transmitters and headphone combos (2x M-Pow, 2x Avantree and one that looks very similar to the Taotronics one shown earlier in this thread) and ALL are crap. Every single one had lag that was waaay too noticeable for my liking. I want something that acts as quick as a standard set of headphones, with no perceptible lag. After spending over $400 searching for kit THAT WORKS, I gave up. Incredibly, I found an Ebay seller that specializes in recycling old electronics and I bought 2x pairs of 1980's era Hanimex dynamic 600ohm headphones. I remember them from my days using the Garrett Deepseeker and Groundhog A2B. Tried them on my 4500M and my 24K.....blown away, best set of headphones I've ever owned. Wish I could buy more lol. I just hope I can run them on my upcoming GPX6000 1 Link to comment Share on other sites More sharing options...
Northeast Posted October 25, 2021 Author Share Posted October 25, 2021 22 hours ago, Aureous said: Ive trialed 5 different sets of APTX LL Just wondering what you are trialling them on? Are you getting the connected 'plus' + showing up? That Avantree AS70 shown on the last page of this thread has just been used for a couple of days over last weekend - worked a treat. But, my level of acceptable, perceptible lag may be different to someone else's ? Link to comment Share on other sites More sharing options...
Aureous Posted October 25, 2021 Share Posted October 25, 2021 Yeah NE, I was trying everything I could to make them worth the $$ I paid. But that fraction of a second difference just sh*ts me to tears lol I thought I hit the jackpot last year when M-Pow made a new transmitter and 'Plus' earbud set combo....it looked like exactly the thing I was looking for, so I could wear my old army slouch hat....but NOPE. That slight delay was just enuff to irritate me and revert back to std headphones. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now