Minelab GPZ 7000 19" Coil

[Randy Lunn]

Here is what is posted MD-Hunter blog:

Minelab GPZ 19. NEW 2016 (price $1,500?)

At the beginning of 2016, the info about Minelab’s new coil appeared at the Las Vegas Gold & Treasure Show. Here are the first photos and… contemplated price of the novelty: $1,500. Can it really be true?

The new Minelab GPZ 19 coil. Greater detection depth. Large ground coverage. Less ground noise. Waterproof (submersible up to 1 meter). Coil type: SD (Super-D). Size: 19 inches. Designed for a Minelab GPZ 7000 metal detector.

[Randy Lunn]

Note: One reply stated that this picture was a GPX 5000 18" coil. I do not think so. The GPX has an external cord and these pictures clearly show an internal cord. The GPX is also a Mono-coil machine. This coil is clearly a GPZ Super-D coil design. It would be a lot of work to produce a fake coil as a joke. Looks like the real deal to me.

[Tortuga]

The picture is from the new Minelab video that Steve posted about how they make metal detectors at their headquarters. Watch the video carefully and you can see that prototype coil and another guy testing it outside next to a standard 14" GPZ coil. It's being discussed on Bill's forum too.

[Randy Lunn]

In the recent Minelab video: "Meet The Metal Detectives - Inside Engineering at Minelab Electronics", this coil design is on a CAD machine is the start of the video. Two Minelab testers (at the 2:30 point in the video) are shown using these coils. You have to stop the video to see them.

The real issue is pricing.

[LukeJ]

11 hours ago, DDancer said:

...Interesting that the upper coil only has reinforcement to the front *and a band aid* but not to the rear~ a potential problem if that casing is near finalized.  Interesting though....

I was thinking that the 'reinforcement' was actually the conduit for the wires to get out to the transmit coil.  I figured they did it this way to make it easier to 'electronically balance' the coil since the wire path is centered between the receive coils and they would see 'it' equally.  Based on what I see, it will be strong enough, but the dragging on the brush will most likely be the problem, as already mentioned.  I also see a very heavy coil as evidenced by the design and the fact they would take the time to remove as much material as possible and create a fairly complex mold.  Just my observations.

But hey, what do I know?

Thanks,

Luke

[Sourdough Scott]

Just wondering if the Extra Deep setting might come into play with a coil of this size?

[goldenoldie]

As I see it, it is only a 19" x 9" coil due to the size to its centrally located transmit coil or loop.

[Tortuga]

The open design is to keep the weight down and as close to the stock 14" coil as possible.

9 hours ago, goldenoldie said:

As I see it, it is only a 19" x 9" coil due to the size to its centrally located transmit coil or loop.

It's probably a "two in one" coil design like the stock 14" coil. Small coil in the middle, big one on the outside. Check Steve's pics of the inner guts of the 14" coil to verify this. 

[Steve Herschbach]

16 hours ago, Randy Lunn said:

Note: One reply stated that this picture was a GPX 5000 18" coil. I do not think so. The GPX has an external cord and these pictures clearly show an internal cord. The GPX is also a Mono-coil machine. This coil is clearly a GPZ Super-D coil design. It would be a lot of work to produce a fake coil as a joke. Looks like the real deal to me.

My reply on the MD Hunter blog stated that their photo of a purported GPX 19 coil at the Vegas Show was actually of a GPX 18" coil. I was at the show and I was with the Minelab rep who announced news of the new coil. There was no GPZ19 coil at the show and that's a fact.

The photos you posted are newer and indeed of the GPZ19 coil. And by the way, the GPX uses mono and DD coils.

This new 19" coil is now old news and no mystery as to its construction - it is simply a larger version of the coil that comes on the GPZ, a Super D or "DOD" coil. The photo at the start of this thread is of housing parts. The coil is a cut out design to save weight.

The coil was first announced on this forum February 27 at http://www.detectorprospector.com/forum/topic/1712-19-20-coil-for-gpz-7000/

The official announcement was April 10 http://www.detectorprospector.com/forum/topic/1922-gpz-19-accessory-coil-coming-soon/

And yet another thread May 20 http://www.detectorprospector.com/forum/topic/2076-minelab-gpz-19-coil/#comment-24952