Cal_Cobra Posted October 29, 2018 Share Posted October 29, 2018 1 minute ago, Jackpine said: I have left several 15's (axe heads) leaning against the base of trees at the lumber camp I have been hunting. Wonder why their ringing in at that TID range? I don't recall that phenomena before the firmware upgrade? Link to comment Share on other sites More sharing options...
dewcon4414 Posted October 29, 2018 Author Share Posted October 29, 2018 Finally got in the water today. Hey I like my changes. Having it set to 20in the second bin makes it sound more like the high false u get off say nails. The 13 for quarters makes the really stand out and LARGER. No down side that I notice Link to comment Share on other sites More sharing options...
Jackpine Posted October 29, 2018 Share Posted October 29, 2018 5 hours ago, Cal_Cobra said: Wonder why their ringing in at that TID range? I don't recall that phenomena before the firmware upgrade? Not sure of the answer or that I can confirm if the upgrade has anything to do with it either. What I do know is that it is running smoother and with less falseing overall so IMO the upgrade made a positive difference. Coin shooting at old fair grounds and one room school sites in the area is a pleasure, meaning it has pretty much taken ferrous out of the equation compared to when I first got the machine but that could also have to do with use and being more familiar with the detector as well. Link to comment Share on other sites More sharing options...
Cal_Cobra Posted October 29, 2018 Share Posted October 29, 2018 4 minutes ago, Jackpine said: Not sure of the answer or that I can confirm if the upgrade has anything to do with it either. What I do know is that it is running smoother and with less falseing overall so IMO the upgrade made a positive difference. Coin shooting at old fair grounds and one room school sites in the area is a pleasure, meaning it has pretty much taken ferrous out of the equation compared to when I first got the machine but that could also have to do with use and being more familiar with the detector as well. I'm hunting in field2. I think I'll set it back to factory defaults before detecting again and see if that helps, but those axe heads sound so nice, solid TID, etc - lol What's odd is I could totally understand if they were coming in the high 30's as it would be iron wrap-around, but coming in a pull-tab range is very odd IMO. My Nok/Mak machines also seem to love iron tools, but they usually bang in the penny/dime TID range. I'm definitely not looking for iron tools, their interesting, but just not what I need to be lugging home. Wonder if field1 would be any different? What search mode are you using at your logging camp? Link to comment Share on other sites More sharing options...
Jackpine Posted October 29, 2018 Share Posted October 29, 2018 I'm using field 2 as well at the camps but have switched to using park 2 primarily at most other sites. I might give park 2 a try there next time I'm out that way. I'm fighting a cold and the northern Mich weather at the moment however. Link to comment Share on other sites More sharing options...
Cal_Cobra Posted October 29, 2018 Share Posted October 29, 2018 Now that our daughter is five months old, I'm inching back into some detecting time after effectively taking late spring and the summer off. I need to refresh my Equinox knowledge, maybe one of the other search modes will false less on iron tools. Good thing for me to test out on the next hunt, hopefully this weekend. 1 Link to comment Share on other sites More sharing options...
midalake Posted October 30, 2018 Share Posted October 30, 2018 For the beach! I am still wondering WHY I would want more then one tone? If it is out of the "ferrous" area and repeats, DIG IT. There is still lots of information that can be garnished from every signal by hunting in one tone like: Size, depth, length, and then comparing every signal in the same tone. Convince me otherwise! Dave Link to comment Share on other sites More sharing options...
Tiftaaft Posted October 30, 2018 Share Posted October 30, 2018 2 hours ago, midalake said: For the beach! I am still wondering WHY I would want more then one tone? If it is out of the "ferrous" area and repeats, DIG IT. There is still lots of information that can be garnished from every signal by hunting in one tone like: Size, depth, length, and then comparing every signal in the same tone. Convince me otherwise! Dave I hunted a tot lot this weekend and decided I would dig anything that gave a non-ferrous reading. I switched over to 2 tone, and I get it. If it beeps, dig it. I found a few pieces of junk jewelry that probably wouldn't have warranted a pinpointer had I been in 50 tones as I normally hunt. In a tot lot, I don't mind picking through bits of foil and trash because it is easy recovery in the wood chips. I found a pocket full of clad which made the day a moderate success, and had there been any gold or silver in the chips, I'm confident I would have found them. The only downside to 2 tone for this type of hunting is... the play structure sounds like every other diggable tone, so a tight swing pattern is key. In 50 tone, I am somewhat able to hear the different tone of the structure, but then again, it masks targets close to the structure anyway. all even. BTW, the 6" coil is much easier to manage in those tight quarters (no pun intended) than the 11". ~Tim. Link to comment Share on other sites More sharing options...
dewcon4414 Posted October 30, 2018 Author Share Posted October 30, 2018 The problem.... if you want to call it that, with using 2 tones to me seems to be you have to select the tone you want to hear. That single tone..... includes falsing tones now. Im sure its also and individual hearing thing.... but to me the very high tones .... like 25 makes the targets sound little.... not weak... just little. I like two tones in the water...... but 5 tones now that ive switched it around seems to work well with low digits sound like iron false on other machines...... higher pitch. I noticed the same thing on say sun glasses or cans..... changing the high digit bins to 13 really makes cans larger now...... and i catch deep dimes and quarters easier that might have just given a short high pitch before. Hunting in AM if you are digging it all out there it doesnt take long to learn junk jewelry like earrings. The Nox has a good sized coil HALO so working in tight areas like tote lots would be tricky. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now