LE.JAG Posted June 26, 2019 Share Posted June 26, 2019 he should not have a problem with EMIin the month of May I tested the production versionon this beachhttps://www.google.fr/maps/search/saint+jouin+bruneval+plage/@49.6648426,0.1088492,3522a,35y,124.65h,44.13t/data=!3m1!1e3if you can do a zomewe see a refinerya radar antenna (marine protection)and on the hill two big antennas phone and other wireless stuff ...plus the high voltage line feeding the refinerythe beach was chosen specifically for its conditionsand its black sandthe silence was perfect / even at full powerI did not have gold on this testbut a stainless steel ring (same sound as gold) at 15/20 ' Of course, there will certainly be in the worldareas where EMI are stronger or differentbut AQ is really very stableeverything has been thought about the design to limit noisethe plans of masses and the used componentsare far superior to other detectorsthe best proof is the 7usif others never proposed such a low delayit's only because of the noise .......... 4 Link to comment Share on other sites More sharing options...
EL NINO77 Posted June 26, 2019 Share Posted June 26, 2019 LE.JAG ... I would have one question .. is it possible to market AQUA-Pulse and TERRA-Pulse in the same time period ..? Another question would be when will I start pre-orders for AQUA-Pulse and TERRA-Pulse detectors? I admit to TERRA-pulse is a detector that is personally interested in me ... 2 Link to comment Share on other sites More sharing options...
Tmox Posted June 27, 2019 Share Posted June 27, 2019 LE.JAG, I have a lot of nails on my beach. As they corrode and become needle like they the give off both the low grunt sound and a high conductor sound. When you silence the iron on the Impulse does it silence both the low and high sound? Thanks, Tim Link to comment Share on other sites More sharing options...
LE.JAG Posted June 27, 2019 Share Posted June 27, 2019 13 hours ago, EL NINO77 said: LE.JAG ... I would have one question .. is it possible to market AQUA-Pulse and TERRA-Pulse in the same time period ..? Another question would be when will I start pre-orders for AQUA-Pulse and TERRA-Pulse detectors? I admit to TERRA-pulse is a detector that is personally interested in me ... the first to go out AQuathe Terra should not be longit's the same platform, some components that change+ the facade / the rest is of the programming .. 5 Link to comment Share on other sites More sharing options...
LE.JAG Posted June 27, 2019 Share Posted June 27, 2019 4 hours ago, Tmox said: LE.JAG, I have a lot of nails on my beach. As they corrode and become needle like they the give off both the low grunt sound and a high conductor sound. When you silence the iron on the Impulse does it silence both the low and high sound? Thanks, Tim in all metals the sound is mono-tone deep targets better mark the differencesounds light and symmetrical = often goldin saturation (sound too strong) the difference is more difficult((it is necessary to raise the coil / to no longer be in saturation))but iron, especially in length, like nailsgive a double sound / very markthe loss between / all metals and rejectionis very weak with AQ // everything depends on the sandin white sand with normal mineralizationabout 5% 3 1 Link to comment Share on other sites More sharing options...
TerryinHawaii Posted June 27, 2019 Share Posted June 27, 2019 LE.JAG, will both coils be available to buy when the AQua starts shipping later this year? In my case, I do want both sizes. I have an area that is very rocky that has produce my biggest diamond rings. And the 8 inch coil would be best coil for this area. Link to comment Share on other sites More sharing options...
LE.JAG Posted June 27, 2019 Share Posted June 27, 2019 4 hours ago, TerryinHawaii said: LE.JAG, will both coils be available to buy when the AQua starts shipping later this year? In my case, I do want both sizes. I have an area that is very rocky that has produce my biggest diamond rings. And the 8 inch coil would be best coil for this area. Hi Terry, No, I think we'll have to wait a bit for the 8 'but, there is a new mode that should give you a few poundswhile waiting for the 8 'I can not say more ... ? 3 Link to comment Share on other sites More sharing options...
schoolofhardNox Posted June 27, 2019 Share Posted June 27, 2019 On 6/26/2019 at 10:48 AM, Rick Kempf said: I used an AQ prototype last October under huge transmission lines - quiet as a mouse in all metal. Did you get a chance to try it in the other modes Link to comment Share on other sites More sharing options...
Rick K - First Member Posted June 28, 2019 Share Posted June 28, 2019 I tried them all at one time or another, I was finding aluminum scrap at this site - probably a result of the power line construction. I am pretty sure I was using either multitone or mute - I am not certain, I was not concentrating on the power lines, just trying it in the nice deep sand.. The machine I had for a few days in October was a prototype and the production version is supposed to be refined in many ways. All metal is inherently quieter than any other mode, it has to do with the way information from more than one channel is used. It is a characteristic of multi channel PI detectors. 2 Link to comment Share on other sites More sharing options...
Mark Gillespie Posted June 28, 2019 Share Posted June 28, 2019 I'd love to compare this machine to my TDI at the beach. But it most likely won't be available before August. I know there is a lot of discussion as to depth and that it will detect a nickel at 17". This compared to my TDI at 16", but the TDI has a 12" coil and the AQ will have the 12 1/2" coil. Size will also increase the depth capabilities. So that being said, it would be very interesting to see, comparing the two detectors using identical coil dimensions (the old saying apples to apples) . I know there will be many more advantages of the AQ, pulse delay, iron features etc. but coil sizes need to be the same for a truthful analysis. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now