Chase Goldman Posted April 16, 2018 Share Posted April 16, 2018 Steve - I get it, now. You're saying the Equinox overall rides the edge as a hot detector so has a propensity to bump falsing depending on GB and gain settings. As a global setting on Equinox, the gain was fixed when I was cycling through the modes and doing my "shake" false test so what I was seeing was the difference in local GB readings between the modes with the higher GB settings being most susceptible (makes sense when you think about it as you are trying to "punch through" the high ground phase reference to see targets so the machine gets sparky even though gain was not manually increased. It's more complicated than that, I know, but a crude attempt to conceptualize what is going on). Lowering sensitivity (gain), which I didn't do. could have compensated for bump falsing somewhat (with an obvious loss of target sensitivity), but it was the elevated GB setting that pushed it over the edge. Again, the key is maximizing signal-to-noise ratio as much as possible, not just maximizing signal level (gain driven) which does nothing for you if you are also just increasing the noise floor. So lowering sensitivity to get rid of even more noise, might make sense under the right circumstances. Takes hours on the machine to get a feel for what works in this regard and what doesn't as operating a detector is constant balancing of a number of trade offs. Thanks again for opening my eyes, Steve. I'll figure it out eventually. 2 Link to comment Share on other sites More sharing options...
Chris Woods Posted September 24, 2018 Share Posted September 24, 2018 What is the outer diameter of the largest section of the Golden Mask shaft? Thanks, Chris Link to comment Share on other sites More sharing options...
EL NINO77 Posted September 24, 2018 Share Posted September 24, 2018 ... it's 28mm , .. I have a golden mask with these carbon shaft ... such a set to adjust handle to shaft Golden Mask is for sale ...I already ordered one .. I write more about it .. when it comes .. 4 Link to comment Share on other sites More sharing options...
Gatev Posted September 25, 2018 Share Posted September 25, 2018 Hi friends,yes Lovecpokladu are made on 3d print tools for golden mask shaft.I give you link,if someone want to order . Link to comment Share on other sites More sharing options...
EL NINO77 Posted September 27, 2018 Share Posted September 27, 2018 So, and the telescopic carbon shaft is home. The Equinox is 57 cm long for comparison,the weight is 1224 grams of 6 "coil.. 3 Link to comment Share on other sites More sharing options...
usaflaginmaine Posted October 7, 2018 Share Posted October 7, 2018 On 9/25/2018 at 9:32 AM, Gatev said: Hi friends,yes Lovecpokladu are made on 3d print tools for golden mask shaft.I give you link,if someone want to order . Hi. I already have an Equinox 800 and a golden mask rod. I have been pondering a good way to connect the two. Can I purchase only the printed adapter? Link to comment Share on other sites More sharing options...
EL NINO77 Posted October 8, 2018 Share Posted October 8, 2018 Yes you can, the price is about 15 Euros.... 2 1 Link to comment Share on other sites More sharing options...
echidna Posted October 9, 2018 Share Posted October 9, 2018 22 hours ago, EL NINO77 said: Yes you can, the price is about 15 Euros.... Don't think they ship overseas? Link to comment Share on other sites More sharing options...
EL NINO77 Posted October 9, 2018 Share Posted October 9, 2018 I will call there and ask ... 1 Link to comment Share on other sites More sharing options...
usaflaginmaine Posted October 9, 2018 Share Posted October 9, 2018 12 hours ago, EL NINO77 said: I will call there and ask ... Did you find out? I inquired, they responded, but when I gave my shipping info to USA they have not responded. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now