Desert Dawg Posted September 15, 2018 Share Posted September 15, 2018 Will there be a future concentric coil made for the equinox 800? I sure could use one for nugget detecting smaller gold. 3 Link to comment Share on other sites More sharing options...
Chase Goldman Posted September 15, 2018 Share Posted September 15, 2018 Based on the gold I've seen recovered, with the 11" DD and 6" DD not sure it can be detected much smaller. ML doesn't seem to show a lot of interest in developing OEM concentric accessory coils for its detectors, in general. I see that you've visited the Equinox gold hunting threads here so you know what Equinox can do with small gold using the stock and 6" DD coils. Always trying to learn more about MD tech. Please educate me on what more does concentric bring to the table for prospecting, presuming Equinox is even designed to be compatible with concentric round or coaxial elliptical coils? Thanks. Link to comment Share on other sites More sharing options...
Steve Herschbach Posted September 15, 2018 Share Posted September 15, 2018 Well, first we need to get the 12" x 15" DD out the door. And then I want my 6" x 10" DD coil. Then maybe we can start talking concentrics! 1 3 Link to comment Share on other sites More sharing options...
Alluminati Posted September 15, 2018 Share Posted September 15, 2018 Ya really just delete this thread I don't want them reading it yet. lololol 1 Link to comment Share on other sites More sharing options...
Chase Goldman Posted September 15, 2018 Share Posted September 15, 2018 I want the 6x10 elliptical DD too. Like I said, not sure ML is into concentrics as much as say Whites, so not worried they would do one before getting a small elliptical out the door. Any 5 to 8 inch wide coil with 10 to 13" length would be welcome. Link to comment Share on other sites More sharing options...
EL NINO77 Posted September 15, 2018 Share Posted September 15, 2018 CC-coil -I'm thinking about this idea a few days ago, even in terms of ID of iron undesired waste ... "From my observation 6" equinox coil on targets 1 grain- range 3 ", standard coil 11" - range 2 " with the same sensitivity-20 ... program park 2, .... Is there also the possibility of a small coil-DOD-super D coil ... Link to comment Share on other sites More sharing options...
Chase Goldman Posted September 15, 2018 Share Posted September 15, 2018 22 minutes ago, EL NINO77 said: CC-coil -I'm thinking about this idea a few days ago, even in terms of ID of iron undesired waste ... "From my observation 6" equinox coil on targets 1 grain- range 3 ", standard coil 11" - range 2 " with the same sensitivity-20 ... program park 2, .... Is there also the possibility of a small coil-DOD-super D coil ... Now you are asking for a miracle. Lol. Link to comment Share on other sites More sharing options...
EL NINO77 Posted September 15, 2018 Share Posted September 15, 2018 small Super D coil - for VLF, should not be a big technical problem .. Link to comment Share on other sites More sharing options...
Chase Goldman Posted September 15, 2018 Share Posted September 15, 2018 Technologically not a challenge, all I am just saying that ML is not moving fast on any new coils for the Nox and then you start talking more specialized coils that may or may not have a wide customer base, and ML may be even less inclined to make the effort. As Steve said, let's get them to deliver on the coils they already promised before we start throwing more specialized coil requests into the mix. 1 Link to comment Share on other sites More sharing options...
EL NINO77 Posted September 15, 2018 Share Posted September 15, 2018 When I compared the ALLmetal and Discrimination modes in the 6-inch coil, I pulled the sensitivity up to the level when I feel weak, but regular signal on 13.5 mm -0.54 gram silver Denar coin -is buried at 23cm in the ground ... I got the sensitivity of 14th to Allmetal mode as also at Dyskrimination mode... program Park2, recovery speed 4 ... Signal without ID but clear and regular signal on nonferous metal ...Equinox has very good signal processing...All metall me also definitely outweigh discriminative-better capture signal -If the coil is not exactly above the deep target...like as a mini mix mode... 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now