Turhan Posted February 17, 2022 Share Posted February 17, 2022 hello i need to shorten my equinox shaft unfortunately the original shaft of the nox only shortens 1 meter i need something to go down as 50cm or 70 cm do you guys know any aftermarket shafts for equinox ? Link to comment Share on other sites More sharing options...
CPT_GhostLight Posted February 17, 2022 Share Posted February 17, 2022 Contact Steve of Steve's Detector Rods. He's a member of this forum and a great guy to deal with. He can make any kind of carbon fiber shafts that you want. Steve's Detector Rods 3 Link to comment Share on other sites More sharing options...
PimentoUK Posted February 17, 2022 Share Posted February 17, 2022 Buy an additional Minelab carbon lower rod. Cut down the length, make a new hole in it for the metal spring-pip, and fit it directly into the upper rod. 60cm total length should be easy to attain. https://joanallen.co.uk/minelab-equinox-lower-shaft.html Link to comment Share on other sites More sharing options...
Turhan Posted February 17, 2022 Author Share Posted February 17, 2022 2 hours ago, CPT_GhostLight said: Contact Steve of Steve's Detector Rods. He's a member of this forum and a great guy to deal with. He can make any kind of carbon fiber shafts that you want. Steve's Detector Rods thank you for your answer but unfortunately im not located in USA or EU ? Link to comment Share on other sites More sharing options...
Turhan Posted February 17, 2022 Author Share Posted February 17, 2022 3 minutes ago, PimentoUK said: Buy an additional carbon lower rod, Cut down the length, make a new hole in it for the spring-pip, and fit it directly into the upper rod. 60cm should be easy to attain. i saw a product named tele knox telescopic equinox shaft but it's not for sale in my country. Link to comment Share on other sites More sharing options...
Luis Posted February 17, 2022 Share Posted February 17, 2022 15 minutes ago, Turhan said: i saw a product named tele knox telescopic equinox shaft but it's not for sale in my country. € 41,66 43%de DESCUENTO | Manbily C-333 soporte de monópode de viaje portátil de fibra de carbono profesional con Mini Base de trípode para cámara Digital DSLR https://a.aliexpress.com/_u9xen0 I modified mine with this. you should keep in mind that you will have to buy some parts or if you have a 3d printer you can do it yourself. You can find them on eBay Link to comment Share on other sites More sharing options...
steveg Posted February 18, 2022 Share Posted February 18, 2022 Turhan, I could build you a three-piece shaft, but it would be a bit different than the Tele-Knox shaft. On mind, the upper section would detach from the other two sections for transport, while the lower rod could collapse entirely into the middle section. So, you'd have two sections when disassembled -- the upper section, and then a roughly equally sized middle/lower section (lower collapsed fully up and inside the middle section). I'm not sure what country you are in, but I have shipped all over the world. While it's costly (shipping internationally is expensive, and most countries levy "VAT" or "import duties" on the package), I'm willing to work with you on a design if you like... Thanks, Steve 1 Link to comment Share on other sites More sharing options...
PimentoUK Posted February 18, 2022 Share Posted February 18, 2022 Guys ... he's not wanting it to collapse small for transportation, he's wanting it to be short WHEN HE IS USING IT. If you insert the lower rod up to the top locating hole on the central section, it's about 1 metre total ( I haven't checked on my one ) and he wants 50 - 70 cm. For Scuba-dive use, maybe? The lower rod can be directly inserted into the top shaft, that will get the length into the 90cm zone. He could make a new pip hole in the lower rod, that would let it be inserted a few cm further inside the upper shaft, the limit being where the control-box fits on. But he's going to need a shorter lower rod if he wants to get 70cm or less. Assuming he can buy a Minelab Equinox legally in his country, he can thus buy a new Minelab lower rod, which he can cut down how he likes to get the 70cm or shorter total. Minelab distributor in Turkey: https://www.minelab.com/usa/where-to-buy?search=dealer&country=206 3 Link to comment Share on other sites More sharing options...
steveg Posted February 19, 2022 Share Posted February 19, 2022 Pimento, You may be right; I wasn't reading it that way, but if that's the case, then yes -- the lower rod can be inserted as you suggest. Turhan, I can build a "dive shaft" for you, at whatever length you need; I am also happy to build a shorter lower rod, with spring button installed, if that helps anything. Thanks! Steve 1 Link to comment Share on other sites More sharing options...
Valens Legacy Posted February 19, 2022 Share Posted February 19, 2022 On 2/17/2022 at 11:26 AM, Turhan said: hello i need to shorten my equinox shaft Are you wanting the shaft shortened for diving purposes? If you are be careful as most of the Nox's have had water issues even though they are supposed to be good for a few meters. SteveG is a great person to help you with any shaft that you need. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now