Garrett Axiom & Minelab GPX 6000

[Chase Goldman]

5 hours ago, abenson said:

The Axiom is a great looking machine and looking forward to trying one out. The only real concern I have right now is how the audio is with z-lynk system. I tried it on my 5000 and Docs battery system trying to go wireless and didn't care for. Although on the Aoex the audio seemed fine.

That's ironic Andy because my go to wireless setup on my GPX 4800 is Z Lynk and an MS3.  Just needed to make sure the muff with the antenna was pointing towards the Z Lynk transmitter and srop outs disappeared and audio has been great.  But I have heard other complaints ts as well when married to the GPX.

Yeah, unfortunately, APTX LL will eventually fade away as it is no longer being supported. As soon as Qualcomm decides to stop manufacturing the chipset, there will be some issues.  Probably still a few years off.  I complained about this in another thread, but manufactures who have gone all in on APTX-LL on their latest detectors should have future proofed themselves on the GPX 6000 and Nokta Legend by including dual radios utilizing their proprietary wireless audio solutions (WiMax and Nokta "Green") as backups just as was done on the Nox.

Personally, I'm OK with Z Lynk.  BT would have been nice but not as a the sole wireless option based on APTX-LL's sunsetting.

[Norvic]

On my modded SDC I had to take the WiFi transmitter out of the new case and mount it externally for reliable reception on the WiFi shoulder speaker. Much better to have the detector manufacturer fitted WiFi to avoid these drop outs and avoid additional battery charging each day before you can enjoy a coldie.

[jasong]

Good to know. The delay physically makes me lose orientation sometimes, or balance when what I'm seeing my body do doesn't match what my ears are hearing. Kinda like having your own voice echo back to you when talking on a bad cell connection and trying to keep the conversation straight. 

A worse version of it happens when play drums through Bluetooth LL headphones where I'm moving even faster (32 and 64th notes) - it disorients my brain/eyes from the movement of my body enough that I lose coordination and it's literally made me almost fall off my seat. My coordination is degraded enough recently due to other issues that I really hate having to use devices that make it even worse. Yet I have friends who it doesn't bother at all, but when I listen to them play I can tell their timing is slightly off and they don't realize it.

I don't think BT belongs on any tool requiring hand/ear coordination until they get some tech like this with a delay below the threshold of human detection. Until then, me personally, I'm all for proprietary solutions like the WM12 and whatever this Z Lynk is. 

*this was in response to a post that now appears to be deleted...

 

[Steve Herschbach]

I deleted my last post Jason, when I found the source was two years old. But about Z-Lynk:

“Z-Lynk technology is designed for a near-zero delay from your detector to your headphones. The Garrett Z-Lynk Wireless System operates with a 17-millisecond delay—six times faster than Bluetooth. This means you are hearing your target signal while the searchcoil is directly over the target, helping you to pinpoint and recover your targets more accurately.

Frequency-hopping technology creates an infinite number of channels to prevent interference with nearby headphones and other wireless devices.”

https://garrett.com/sites/default/files/2019-11/1539400_zlynk_wireless_manual_en.pdf

All About Garrett Z-Lynk

[jasong]

Nice, 17ms should be more than sufficient.

Do you think there is a possibility that we could see an even hotter timing than Fine with future firmware updates?

Just curious because as you mentioned you stayed in Fine while running through the hottest magnetites and serp grounds in California, I wonder if there might be a little further it could be pushed for those people who detect in milder ground and could use an ever hotter timing?

[Steve Herschbach]

I’m sure they will release updates. I believe also in not counting on things being other than what they are. How much can be changed in programming, how much is inherent in hardware, I do not know. You should know I have a tendency to run machines hot and noisy and think they are just fine, and others who use my settings think the results are unusable. Point being other people might be backing down the sensitivity and/or toning down the modes, in the very same places I am running flat out. I ALWAYS push for more, but sometimes that leads to an unstable hot mess. An example is Gold Monster maxed out, or my Steve’s Insane Settings for GPZ.

[GB_Amateur]

20 hours ago, jasong said:

I can't understand how no one notices the delay in the LL/APTX stuff though.  ...The faster you swing the more pronounced the delay is with LL.

You aren't the only one as I've been saying it since day 1 that I owned the Minelab Equinox (March 2018).  I was going to get a friend with a fast camera to help me quantify how latency is impacted by swing speed.  I also looked into golf putterhead speeds for different length putts and how that parallels coil swing speed.  Baseball (maybe cricket, too?) is another analogy where 'logic' says there's no way a batter can react quickly enough and yet it happens, by the most skillful, of course.  How many people would appreciate such a study?  It seems in this day-and-age ego and stubborness receive too much credibility over measurable evidence....

I assume the Axiom is (err, will be) just like Garrett's other detectors with that proprietary Z-lynk solution.  You can use their headphones (so no wires) or combine the receiver module with your own favorites.  If you're willing to put up with an extra component (the Z-lynk receiver unit) you get all those options Steve was referring to while not be tethered to the detector.

 

[Steve Herschbach]

Ego and stubbornness, or just being honest? I use Bluetooth LL and the delay does not bother me at all. I’m not saying it’s not there. I’m saying it’s a genuine non-issue for me, and that’s the truth. If ego and stubbornness are involved, it’s insisting that everyone be bothered by something that clearly does not bother a lot of people. Maybe if you swing your detector like a golf club I guess. I don’t. I go slow, and the difference between 17 ms and 40 ms is an ant fart to me.

It’s all moot as regards Z-Lynk at 17 ms. The transmitter is built into the detector, and the receiver into the headphone. Pairing is almost instant and once paired, just turn on the detector, good to go. Way less hassle than Bluetooth in that regard.

The Z-Lynk enabled Garrett Pro-Pointer can be added as an option, and will seamlessly pair with the headphones and detector both, so you can use and head the pinpointer without removing headphones. Finally, buy a Z-Lynk transmitter box, and it will work with every detector you have, and the pinpointed also. It is actually probably the best one stop solution for wireless on multiple detectors. The only issue is you have to like the fit and sound produced with the MS3 headphone with single volume control. If not, get a receiver box, and use your favorite wired headphones plugged into it.

Garrett Z-Lynn Wireless Audio System Details

Garrett Z-Lynk Enabled Pro-Pointer AT Pinpointer Details

[Chase Goldman]

2 hours ago, GB_Amateur said:

It seems in this day-and-age ego and stubborness receive too much credibility over measurable evidence....

Really.... Oh there's no doubt APTX-LL has a measurable delay of up to 40ms just as ALL of the proprietary wireless solutions bottom out at about 17ms, didn't think anyone was arguing that and it doesn't need to be "measured" to be proven.  The issue is that we are all wired slightly differently and for some 40 ms is not an issue and for others 17 ms is just intolerable.  For me personally, for detecting, I can comfortably deal with APTX-LL level delays but anything greater than that (even APTX or possibly even APTX Adaptive) and the delay is intolerable for me.  IMO, it's not stubborness, but personal preference and the limits of what we can individually deal with IMO.  The study would be interesting I suppose but it would probably just illustrate what we already know and that is humans can perceive latencies at about 15 ms (someone listening for the delay in their own spoken voice through headphones) but typically people can tolerate audio latencies of up to 150 to 200 ms. No one here is forcing anyone to deal with any specific wireless protocol other than the manufacturers who have made design decisions that limit end-user options for specific detector models.

Here is an interesting Wikipedia article discussing audio delay:

https://en.wikipedia.org/wiki/Latency_(audio)#:~:text=In one study%2C listeners found,his or her own voice.